nuuo Crystal NuThermal Plugin Installation Guide
- June 13, 2024
- NUUO
Table of Contents
Crystal NuThermal Plugin
Installation Guide
Thermal camera
- Crystal™
NUUO 3rd Party
Crystal NuThermal Plugin
Installation Guide
Crystal will receive the video stream from Thermal RTSP Server
-
Add Video Device (Thermal Camera)
1.1 Please execute below steps twice, one for normal image another for thermal image. The filed in information should be same as Thermal Software setting
URL/IP address : Fill in the URL/IP address as below format rtsp://ThermalSofterwareIP:RtspPort/CameraName
The example here is rtsp://10.0.31.8:554/S2
Brand : Generic
Model : RTSP
Protocol : TCP
※Port, Account, Password should match with RTSP server setting -
Drag and Drop the camera into Live View
-
Metadata OSD
3-1 Download Thermal Metadata Plugin from NUUO website
(Link :http://d1.nuuo.com/NUUO/NUUO_Thermal_Detection/Plug_in/crystal/MetadataModelNuThermal.nmp)
3-2 Import Thermal Metadata nmp file to NuClient
3-3 Add Metadata Source “NuThermal” to receive
Thermal Metadata
3-4 Click
metadata source and fill in Connection test information
3-5 Metadata channel :
Camera IP : IP address of thermal camera
Temperature Upper Limit : Once the detected Temp exceed the upper limit, it will trigger alarm and show the keyword in metadata transaction.
Exceed Upper Limit Keyword : a set of strings that will be triggered when Plugin receives Metadata specified by Temperature Upper Limit and used as event keywords.
3-6
Download Thermal Filter from NUUO website
(Link :http://d1.nuuo.com/NUUO/NUUO_Thermal_Detection/TagFilter/crystal/thermal_camera_filter.ini)
3-7 Setup Filter : After importing the thermal metadata, you will see the default filter imported in the filter section
※If you want to setup the custom filter, please double check if the Metadata show in the LiveView and Playback are both correct
3-7 Adjust the Metadata Front, Front Size and
Associated Camera which will show the Metadata3-8 You will see the Metadata attach on the assigned camera
- Setup event and related action
4-1 In the Event Action section to add custom event and action
4-2 Copy Exceed Upper Limit Keyword
in the properties section
4-3 Paste to Text which is under User defined configuration
setting
The example here is “exceed_ulimit=1”
4-4 After setting the event, you will see the action show
in the LiveView once the alarm is triggered
- Setup event and related action
© 2020 NUUO Inc. All rights reserved.
www.nuuo.com