NUUO NVRsolo The Intelligent Surveillance Solution User Guide
- June 12, 2024
- NUUO
Table of Contents
The Intelligent
NVRsolo
Quick Start Guide
Step 1: Unpack the Unit
This package contains the following items:
| 2bay Package
---|---
The unit| V
Remote control, 1.5M IR extender cable| V
Disk screws| V (for 3.5″ disk)
Pad and stand| [Horizontal] foot pads; [Vertical] Stand, foot pads and screws
Power| 12V 5A 60W power adapter, power cord
Warranty card, Quick Start Guide, CD| V
*CD content: Install Wizard, Remote Live Viewer, Playback System, Backup System,
Verification Tool and Offline License Tool application, user manual, and quick
start guide
Battery spec is 1.5V, AAA, R03. Two batteries are required for a remote
control
Step 2: Install Hard Drives
Refer to compatibility list and install HDDs. For optimal performance
consideration, install disks with the same model and storage capacity.
The available RAID level depends on the amount of disks installed.
Step 3: Connect the Unit and Devices within the Network
Connect the unit, cameras, and router/switch. If you need to make the video
visible over the Internet, please connect to a “router” with
Internet connection, and the unit will retrieve an IP address through DHCP by
default.
The unit processes built-in DHCP service, which takes the job of router to
assign IP addresses, which is suitable for the pure LAN environment.
Step 4: Connect the Monitor
The unit processes two display interfaces, VGA and HDMI. Connect the monitor
to the unit.
The supporting display resolutions are 1920×1080, 1280×1024, 1280×720, and
1024×768. Please confirm that one of the resolutions is supported by your
monitor.
Step 5: Connect the Power
Press the power button once connecting the power.
Step 6: Set up the Unit
The Install Wizard guides you to initialize the system quickly.
-
When the system starts up, you have to choose the system language first. It takes a while for the system to restart.
-
After the system restarts, choose the initiation mode, and then click the Next button.
• Express Mode: you don’t need to set up the network and RAID level.
• Advanced Mode: configure all settings manually: administrator password, network, license, camera, Date/Time, upgrade notification, and RAID level.
If you are not familiar with network settings or not sure if your network includes a router, please connect all cables and cameras, and start with the Express mode. -
Follow the directions of Install Wizard and click the FINISH button to start initializing.
-
After the initiation process ends, you can start to use the unit.
We support configuration, liveview, and playback via web browser. (Internet Explorer11, Chrome on Windows OS, Safari on Mac OS)
Stand
Botton
Vertical stand (Optional)
NUUO accessories package not includes NUUO vertical stand.
If you buy NUUO virtical stand additionally, please follow the instruction
below.
Install 3.5” HDD
For 2 bay installations, it is recommended to connect the SATA cables to the
HDDs before securing the HDDs to the bracket.
When installing HDDs on HDD bracket, please mind your hands from scratching.
Add: 10F., No.285, Sec. 2, Wenhua Rd., Banqiao Dist., New Taipei City 220,
Taiwan
Telephone: +886-2-7739-2260
http://www.nuuo.com/ehelpdesk.php
Documents / Resources
| NUUO
NVRsolo The Intelligent Surveillance
Solution
[pdf] User Guide
NVRsolo The Intelligent Surveillance Solution, NVRsolo, The Intelligent
Surveillance Solution, Surveillance Solution, Solution
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>