Profi-AirBrush AB011352J Paint Mini Shaker Instruction Manual
- June 13, 2024
- Profi-AirBrush
Table of Contents
Profi-AirBrush AB011352J Paint Mini Shaker
Product Information
- Product Name: AIRBRUSH PAINT MINI SHAKER
- Product Version: 23.06
- Manufacturer: Profi-Pumpe
- Website: http://www.profi-pumpe.de
Product Usage Instructions
Safety Precautions:
-
* * Please read the user manual before using the pump.
- Pull the power plug before performing any maintenance or cleaning.
- Protect the device from rain and moisture.
- Be cautious of electrical voltage.
Introduction:
Congratulations on your purchase of the AIRBRUSH PAINT MINI SHAKER. The manufacturer prioritizes functional security and operational safety. To prevent damage to persons or property, it is important to read the user manual carefully and follow all safety precautions and instructions.
In General:
The AIRBRUSH PAINT MINI SHAKER is developed using the latest technology and undergoes strict quality controls. Ensure that the information on the type label matches the included operatinginstructions. In case of doubt, do not use the product. Report anytransport damages immediately to the package distributor and the manufacturer.
Ranges of Application:
The paint shaker can be used with all paints and varnishes that separate after a while in the bottle.
Important Note:
-
* * Inform yourself about working methods and techniques before starting work.
- The product is strictly for personal use.
- No claims for damages due to improper disassembly and cleaning will be accepted.
Startup and Installation:
-
1. * Place the device on a flat surface with a smooth surface. The suction cups can fix the shaker in place.
- To mix the paint effectively, add the appropriate type of paint thinner. If the paint has been stored for a long time, open the container and use a solid object to loosen the paint block from the bottom, which will speed up the mixing process. Note that the device cannot mix dry paint.
- Before each use of the AIRBRUSH PAINT MINI SHAKER, follow the security tips provided in the user manual.
Troubleshooting:
Problem | Possible Cause | Solution |
---|---|---|
The unit does not shake | Missing voltage | Check the connections and connect |
the power plug and the
device
The device makes noise and the paint bottle moves| The paint bottle is not
fixed properly| Switch off the device and fix the paint bottle to the holder
by
tightening the rubber straps. Check the tight fit and restart the
process.
INTRODUCTION
We would like to congratulate you on the purchase of our AIRBRUSH PAINT MINI SHAKER. We appreciate your trust. That‘s why functional security and operational safety stands on first place for us. To prevent damage to persons or property, you should read this user manual carefully. Please observe all safety precautions and instructions for proper use of the airbrush components. Failure to follow the instructions and safety precautions can result in injury or property damage. Please keep this manual with the instructions and safety instructions carefully in order to at any time you canrestore them.
IN GENERAL
The AIRBRUSH PAINT MINI SHAKER is developed according to the newest stand of
technology, manufactured with much care and go under strict intensive
controls. Make sure after unpacking that the data given on the type label
match with the included operating instructions. In the case of doubt is not to
be used. Transport damages are immediately to be reported to the package
distributor on the shipping invoice and to us in written form.
RANGES OF APPLICATION
The paint shaker can be used with all paints and varnishes where after a while
the components in the bottle separate.
Important note: please pay attention before commissioning the AIRBRUSH PAINT MINI SHAKER!
- Please, inform yourself in the literature or on the Internet about the working methods and techniques before starting work.
- We sell only tested products. These are strictly for personal use.
- Claims for damages for improper disassembly and cleaning can not be accepted.
STARTUP AND INSTALLATION
- Place the device on a flat place, preferably with a smooth surface. The suction cups can fix the shaker on the surface so that it does not move due to the vibrations. Wet the suction cups of your shaker with a little water andthen press the device firmly onto the flat surface.
- Before placing the paint bottle on the shaker, you must close it tightly. A lid that is not completely closed may untwist itself due to the vibrations during the process, causing paint to leak.
- Grasp the rubber tab and use it to fix the paint bottle. If the paint bottle is too loose, take another hole and use it to tighten the elastic tab. Check the tightness of the paint bottle, it must not move freely on the holding device.
- Start the AIRBRUSH PAINT MINI SHAKER by pressing the power button.
- Avoid overloading the device and generating heat. The working time should not exceed 15 minutes. Then let the shaker rest for 5-8 minutes.
Note.
To mix the paint even better, add the appropriate type of paint thinner. If
the paint has been stored for a long time, open the container and use a solid
object to loosen the paint block from the bottom of the container, which will
greatly speed up the mixing of the paint. Remember that the device cannot mix
dry paint.
Caution!: Before each work with the AIRBRUSH PAINT MINI SHAKER the
security tips are to be followed
SECURITY TIPS
- Keep away from children! It is not a toy!
- The unit should not be taken by persons commissioning, which are under the influence of alcohol, drugs or medication.
- Please, check before every use that the electrical connections as well as the cable are intact.
- Moreover, it is not recommended to carry out technical modifications. First it is not sure whether these changes are technically flawless and secondly no guarantee can be therefore granted.
- Obey absolutely valid regulations on the electrical security
- Pay attention to the Ambient temperatures between +5 and +40 ° C
- Never leave the appliance exposed to dust, acids, vapors, explosive or flammable gasses or atmospheric agents (rain, sun, fog, snow)
- The unit may be not be used in areas with steam or moisture, or near water.
- Never use the appliance in your bare feet or with wet hands or feet.
- Never pull on the electrical cable or hose.
- Avoid pinching or kinking hoses or cables.
- The device is to be secured / protected through a RCD circuit breaker (release current 30 mA).
- The unit should not be used if it is damaged
The manufacturer explains:
- To take over no responsibility in the case of accidents or damages on the basis of carelessness or disregard to the instructions in this book.
- To reject every responsibility for the damages which originate from the improper use of the device
TROUBLESHOOTING
Problem | Possible cause | Solution |
---|
The unit does not shake
| Missing voltage| Check the connections and connect the power plug and the
device
The device is not switched on| Switch the unit ON with the red power switch
The device makes noise and the paint bottle moves| ****
The paint bottle is not fixed properly
| Switch off the device and fix the paint bottle to the holder by tightening the rubber straps. Check the tight fit and restart the process.
WARRANTY
GUARANTEE REGULATIONS / STATUTORY WARRANTY
For all manufacturer defects and material defects we grant the legal guarantee
time (new and unused product). In such cases we take over the exchange or the
repair of the device. Forwarding expenses are not carried by us.
The guarantee is not valid with:
- Material wear (sealing rings, impeller wheels, impeller chambers)
- Unjustified interventions or changes in the device
- Damages by selffault
- Improper servicing and improper use
Moreover, we give no damage compensation for secondary damages!
NOTES ON DISPOSAL
Electrodevices of our company, labeled with the symbol of the crossed trash
bin, are not permitted to be disposed in your household garbage. We are
registered at the German registration department EAR under the WEEE-No.
DE79535656. This symbol means, that you’re not allowed to treat this product
as a regular household waste item – it has to be disposed at a recycling
collection point of electrical devices. This is the best way to save and
protect our earth.
THANKS FOR YOUR SUPPORT!
EU DECLARATION OF CONFORMITY
The undersigned, Amur S.à r.l., 36, Rue de la Gare, L-5540 Remich, certifies
that the products named overleaf, namely AIRBRUSH FARBEN-MINI-RÜTTLER
(AIRBRUSH PAINT MINI SHAKER) as placed on the market, comply with the relevant
provisions listed below, the relevant EU harmonised directives and the EU
standard for safety. This declarationof conformity applies insofar as no
modifications are made to the product. The sole responsibility forissuing this
declaration of conformity lies with the manufacturer.
The sole authorised person to keep the technical documents: Amur S.à r.l. –
36, Rue de la Gare – L-5540 Remich
Low Voltage Directive (2014/35/EU)
EC Electromagnetic compatibility directive (2014/30/EU) The following
harmonized standards: EN 60335-1:2012/AC:2014, EN 62233:2008, EN
55014-1:2017+A11:2020, EN 55014-2:2015, EN 61000-3-2:2014, EN
61000-3-3:2013+A1:2019,
Signed for and on behalf of:
- Amur S.à r.l.
- Remich, 13.06.2023
- Technical Manager
TECHNICAL DATA
English
| ****
Deutsch
| AIRBRUSH FARBEN-MINI-RÜTTLER ( AIRBRUSH PAINT MINI SHAKER )
(AB011352J)
---|---|---
Input voltage| Eingangsspannung| AC 230V, 50Hz
Output voltage| Ausgangsspannung| DC 3V, 30mA
Material| Material| ABS, Plastic & Metal
Rotationl Speed| Rotationsgeschwindigkeit| 3200r/min
Size| Größe| 9x6x6cm
- Holding device
- Power switch
- DC In plug-in connection
- Suction cups
- Rubber tab
- Amur S.à r.l.
- 36, Rue de la Gare L-5540 Remich
- Tel: +49 611 9458777-0
- SERVICE+RETOURE:
- www.profi-airbrush.de.
Technical changes, misprints and mistakes reserved! Newest information about our products can be found online
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>