QAZQA 96868 Mal WL LED Modern Exterior Wall Lamp Instruction Manual
- June 12, 2024
- QAZQA
Table of Contents
INSTRUCTION MANUAL
Mal WL LED
96868/106664/106665/106666
96868 Mal WL LED Modern Exterior Wall Lamp
96868/106664/106665/106666
2X3.1W LED
incl. LED Board:QL7001178
220-240V~50Hz
| incl.LED QL7001178
2×320|Im Module
610Im Lamp
2×3.1W LED
2x4W LED Lamp
220-240V~50Hz
3000K
CRI>80
30000h
15000 ON/OFF
---|---
This product contains a light source of energy efficiency class
QR | EAN |
---|
https://eprel.ec.europa.eu/qr/771784
| 96868:8718881083761
106664:8718881149665
106665:8718881149672
106666:8718881149689
Replaceable (LED only) light source by a professional.
Replaceable control gear by a professional.
SAFETY INSTRUCTION
Please study the instruction manual and below information carefully before
installing or using this product.
Please keep this user manual for further reference
- The luminaires may only be installed by authorized and qualified technicians according the valid regulations for electrical installation.
- Maintenance of the luminaires is limited to their surfaces. During maintenance no moisture can come Into contact with any areas of the terminal connections or voltage control parts.
- The electrical supply must be switched off at the outset, preferably by means of a switch in the distribution box, before any installation, maintenance or repair work is undertaken.
- Exterior lighting must not be installed during rain.
- Take account of the minimal separation distance from other objects and the room required around the fitting.
- If in any doubt, consult a professional, taking local installation requirements into account. Some countries stipulate that lighting may be installed only by registered installers.
- Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V low voltage conductors.
- Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on all electrical components
- Take account of all available technical information.
- Meaning of symbols:
| For indoor use only, where direct contact with water is impossible
---|---
| This icon indicates the level of water-proof and dust-proof
| Protection Class Ι: the fitting must be earthed
| Protection Class II: the fitting is doubled insulated and does not require earthing
| Protection Class III: the fitting is low voltage
| Minimum distance from lighted objects (meters)
| The type of lamp and maximum size and wattage indicated in each lighting unit must not be exceed; different items require different kind of light sources with different bulb icons
| The armature is designed to work only with the indicated voltage. Different items require different working voltage.
| The luminaire can be used in combination with a dimmer
| The reference light angle and light space of the luminaire
| This luminaire cannot be disposed together with normal domestic waste in standard rubbish can, but you have to bring it to a staging area for electrical waste - Take note of the symbols when connecting wires:
L | Live conductor |
---|---|
**** | Earth |
conductor
N| Neutral
conductor
FittinQ B.V.
Smaragdweg 52, 5527 LB Hapert, The Netherlands
www.qazqa.nl
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>