Aquascape 95036 Ultraklear UV Clarifier Instructions

Aquascape 95036 Ultraklear UV Clarifier

Product Information

The UV Clarifier is a product offered by Aquascape, Inc. It is available in three different models:

• Model Number: 1000
• Item Number: 95036
• Average Pond Size Recommendation: 1,000 US gallons
• Maximum Flow Rate: 500 GPH
• Wattage: 14-Watts
• Power Cord Length: 20′
• Discharge Hose Diameter: 1, 1.25, 1.50 inches
• Warranty: 3-Year Limited
• Model Number: 2500
• Item Number: 95037
• Average Pond Size Recommendation: 2,500 US gallons
• Maximum Flow Rate: 1,000 GPH
• Wattage: 28-Watts
• Power Cord Length: 20′
• Discharge Hose Diameter: 1, 1.25, 1.50 inches
• Warranty: 3-Year Limited
• Model Number: 5000
• Item Number: 95038
• Average Pond Size Recommendation: 5,000 US gallons
• Maximum Flow Rate: 1,500 GPH
• Wattage: 55-Watts
• Power Cord Length: 20′
• Discharge Hose Diameter: 1, 1.25, 1.50 inches
• Warranty: 3-Year Limited

Product Usage Instructions

Before installing the UV Clarifier, carefully follow these instructions:

1. Inspect the product for any signs of damage prior to installing.
2. Do not touch the UV lamp with bare hands as the oil from the skin may reduce the bulb’s performance.
3. Make sure there is no moisture inside the quartz sleeve or on the bulb prior to operating.

Note: Aquascape, Inc. is not responsible for losses, injury, or death resulting from a failure to observe these safety precautions, misuse, or abuse of filters, pumps, or other equipment.
For more information about Aquascape, Inc. and its products, please visit their website at aquascapeinc.com or contact them at:

• US: 866-877-6637
• CAN: 866-766-3426

You can also find Aquascape, Inc. on various social media platforms:

• facebook.com/aquascapeinc
• youtube.com/aquascape4
• pinterest.com/aquascapeinc
• instagram.com/aquascape_inc

Thank you for choosing the Aquascape UltraKlear® UV Clarifier. At Aquascape, we connect people to water the way nature intended. Since 1991, we’ve been creating and field-testing water features in order to provide you with the most reliable products and best value in the water gardening industry.
The Aquascape UltraKlear® UV Clarifier provides pond owners with a convenient and highly effective means to combat algae blooms or “green water”, providing optimum water conditions and crystal-clear pond water. The UltraKlear® uses a technologically-advanced T5 high output UVC bulb, making it more efficient than traditional UV clarifiers. The UltraKlear® UV features a swirl sleeve that helps direct the water around the UV bulb, creating more contact time and increasing UV efficiency up to 50% over traditional UV clarifiers. This instruction manual will guide you through the installation of this filter and recommended maintenance procedures to ensure long-term effectiveness.

Contents

Helpful Symbols

WARNING SYMBOL – Will alert you to the possibility of damage or injury if you do not comply with the warnings that accompany them. The hazard may come from something mechanical or from electrical shock.

Safety Information

• WARNING: Risk of electric shock – This filter has not been approved for use in swimming pool or marine areas.
• WARNING: To provide continued protection against risk of electric shock, connect to properly grounded, ground fault circuit interrupter (GFCI) outlets only, using the following guidelines:
• (A) This filter is weatherproof, but is not designed to be submersed in the water.
• (B) Have a qualified electrician install a properly grounded receptacle outlet, acceptable for outdoor use and protected from snow and rain. If possible locate the outlet or filter so the 20 ft. filter cord will reach the outlet without an extension cord.
• (C) Inspect cord for damage before using.
• (D) If an extension cord is required be sure it is rated for outdoor use.
• (E) Any wiring of pumps should be performed by a qualified electrician to ensure code compliance and user safety.
• (F) To reduce risk of electrical shock, all wiring and junction connections should be made per local codes. Requirements may vary depending on usage and location.
• (G) The power cable should be protected at all times to avoid punctures, cuts, bruises and abrasions.
• (H) Never handle power cords with wet hands.
• (I ) Unplug filter at receptacle outlet when not in use.
• Do not remove cord and strain relief. Do not connect conduit to filter.
• (K) Do not use power cable to lift the filter.
• WARNING: UV SAFETY –A small indicator light on the ballast by the power cord will glow when the fixture is completely assembled and the UV light turned on.
• Caution: Never override the internal UV safety switches when the fixture is disassembled as this could activate the UV light. Direct exposure to UV light can damage the eyes and skin.

UltraKlear® UV Clarifier Specs

gallons
Maximum Flow Rate| 500 GPH| 1,000 GPH| 1,500 GPH
Wattage| 14-Watts| 28-Watts| 55-Watts
Power Cord Length| 20′| 20′| 20′
Discharge Hose Diameter| 1″, 1.25″, 1.50″| 1″, 1.25″, 1.50″| 1″, 1.25″, 1.50″
Warranty| 3-Year Limited| 3-Year Limited| 3-Year Limited

UltraKlear® UV Clarifier Specifications

• Input voltage: 120V AC
• Input frequency: 60 Hz
• For outdoor or indoor use.
• This fixture has been evaluated for use with water only.

Instructions

• Use only in fully assembled state.
• The UV lamp and quartz sleeve are fragile. Please inspect for any signs of damage prior to installing.
• NOTE: Do not touch UV lamp with bare hands as the oil from skin may reduce the bulbs performance. Make sure there is no moisture inside the quartz sleeve or on the bulb prior to operating.
• The fixture is weatherproof, but is not designed to be submerged into the pond. Submerging the fixture could cause electric shock and will void the product warranty.
• If located in a freezing climate, remove fixture during the winter. Drain the unit and and store in a frost free location.
• Do not filter hazardous materials or liquids, such as oil, saltwater, or organic solvents.
• Do not block or restrict the fixture discharge.
• Products returned must be cleaned, sanitized, or decontaminated, as necessary prior to shipment so as to ensure that employees will not be exposed to health hazards in handling said material. All applicable laws and regulations shall apply.
• IMPORTANT! Aquascape, Inc. is not responsible for losses, injury, or death resulting from a failure to observe these safety precautions, misuse or abuse of filters, pumps, or other equipment.

TYPICAL INSTALLATION

1. Narrow contact chamber increases effectiveness of UV light
2. Internal sleeve increases contact time, thus increasing efficiency
3. Additional side water flow output allows for easier installation
4. High-output (HO) T5 bulb maximizes effectiveness
5. On/off indicator light provides quick verification
6. Mounting brackets make it simple to attach the unit to a vertical surface
7. High-quality quartz sleeve maximizes bulb output
8. Mechanical safety switch automatically turns off bulb when the ballast/bulb is removed
9. Electronic ballast ensures optimum wattage and bulb output

• An optional 2-Way Flow Control Valve (#88005) can be used to make sure the water flow does not exceed the UltraKlear® Maximum Flow rate. Please refer to the UltraKlear® Specification Chart included in this manual for maximum flow rate recommendations.
• AquaForce® Solids-Handling Pond Pumps are ideal for use with the UltraKlear®
• The AquaForce® pre-filter cage allows for the pump to be submerged directly in the pond and improves UV efficiency by pre-filtering the larger debris before reaching the UltraKlear®. Other inpond pump makes and models can also be used.
• The UltraKlear® is designed to be located outside the pond. We recommend placing it in a location that is easy to hide and access for maintenance. The UltraKlear® can be attached to a board and set on level ground or mounted using the four screw holes in the support saddles as shown here.
• The UltraKlear® includes three plumbing ports:
• In–Pipe from pump (can use either end port as pond water “In”).
• Out–Pipe back to pond (use opposite end port for discharge back to pond).
• Optional Inlet/Outlet to assist with installation and pipe routing.
• The 90º elbow fittings and Locking Rotational Ball fittings allow 360º directional movement to accommodate the plumbing configuration desired or the Multi-Hose Adapters can be mounted directly onto the UltraKlear® fixture as shown below
• Fittings should be handtightened only and installed with the flat rubber gaskets to achieve leak-free seals.
• NOTE: Do not use tools to attach the fittings.
• Select the Multi-Hose Adapter based on the diameter of the tubing you are using. It is recommended to use as large of a diameter of tubing as possible (up to 1 ½ inch diameter) in order to achieve maximum water flows.
• If using a diameter of pipe larger than the smallest section of the Multi-Hose Adapter, trim off the smaller sections to avoid any flow restriction.
• We recommend using a hose clamp (not included) to secure tubing onto the fitting.
• Installation of stainless steel hose clamp
• After connecting the plumbing, plug the pump and the UltraKlear® into an outlet that is protected by a ground fault interrupter (GFI).
• Once the pump is running and water is circulating through the UltraKlear® fixture, check for any fitting leaks where the external connections are made. Since the filter is located outside the pond, even a small leak must be corrected.
• Check the UV indicator to confirm that the UV light is “On” inside the UltraKlear® fixture.

General Maintenance

• The UltraKlear® UV Clarifier eliminates single-celled algae commonly referred to as green water. For most ponds the process should take approximately 1 week, however significant algae blooms may take 2-3 weeks to clear.
• Bulb life – For effective clarification the UV bulb should be replaced after 12 months of continuous use.
• NOTE: Even though the UV bulb still emits light, it may have lost its effectiveness at clarifying if the recommended operating time has been exceeded.
• Cleaning/replacing the quartz sleeve and UV bulb – A dirty quartz sleeve will reduce the effectiveness of the UV bulb. Debris and mineral deposits can be cleaned using a mild acid like white vinegar or a non-abrasive calcium, lime, or rust remover with a soft bristled brush or sponge

TO ACCESS THE QUARTZ SLEEVE

1. Always unplug both the pump and the UltraKlear® UV Clarifier before servicing.
2. Release the latch tab by pulling/pushing it towards the ballast about ¼”.
3. Rotate the ballast counter-clockwise about ½” to release it from the locked position and carefully slide out the ballast with quartz sleeve attached.
4. The quartz sleeve can now be accessed for cleaning or replacement.
5. If replacing or removing the quartz sleeve remove the threaded plastic collar at the base of the quartz sleeve and remove the quartz sleeve.

CHANGING THE UV BULB

1. Grip the base of the UV bulb and pull it free from the 4-pronged socket
2. Replace UV bulb & quartz sleeve in the reverse order they were removed
   • WARNING: Do not touch UV bulb with bare hands as the oil from skin will reduce the bulbs performance and lifespan.
   • Use a clean tissue to wipe off any dirt or smudges on the bulb and on the quartz sleeve. Also, make sure there is no moisture inside the quartz sleeve or on the bulb prior to reassembly.
3. To reinstall the ballast slide the quartz sleeve into the UltraKlear® housing. Make sure to line up ballast flange with the matching flange shape on the UltraKlear® housing.
4. Push ballast into the outer fixture tube and rotate clockwise to lock it into position. Push the latch tab back into place to lock the ballast in position.

REPLACING OR CLEANING THE INTERNAL CORKSCREW SLEEVE

The Corkscrew Sleeve inside the UltraKlear® housing increases the efficiency of UltraKlear® by increasing the waters contact time with the UV lamp. The swirl sleeve can be removed for cleaning or replacement if needed.

1. Remove the ballast as shown earlier and pull the UV light and quartz sleeve out of the UltraKlear® housing.
2. The corkscrew sleeve(s) can now be pulled free from the outer tube. You may need to tap the end of the outer tube into your palm to dislodge the tube.
3. With the sleeve fully removed it can either be cleaned or replaced.
4. If inserting more than one corkscrew sleeve into the UltraKlear® housing (28W and 55W fixtures), the individual swirl sleeves snap together.
   • NOTE: The swirl sleeves are not designed to be dismantled once they are connected together
5. When reinserting the swirl sleeve insert with the raised directional arrows pointing into the UltraKlear® housing.

Winter Application

• If your pond is subject to freezing temperatures, the UltraKlear® UV Clarifier should be shut down, drained, and stored in a frost-free location.
• When disconnecting the tubing from the filter, the threaded fittings should be removed without the need for any tools (be careful not to lose the flat rubber washers).

Troubleshooting

REDUCED WATER FLOW

• The UltraKlear® will reduce the water flow on the pump. It is recommended to use as large of a diameter of tubing as possible (up to 1 ½ inch diameter) in order to achieve maximum water flows.
• The UltraKlear® internal swirl sleeve could be clogged and require cleaning.
• Pump or plumbing may be clogged. It may be necessary to clean the pump cage screens and impeller.

UV LIGHT IS NOT ON

• A safety cut-off switch will activate if the ballast is not properly connected to the UV housing. Check that the ballast is properly connected to the UV housing.
• Power to the UltraKlear® has been lost. Check to be sure it’s plugged in and the ground fault breaker at the outlet is not activated.
• UV internal bulb connection may be loose. Open up UV and inspect to make sure the bulb is securely plugged into the ballast outlet.
• UV bulb could be beyond its life expectancy. Replace UV light.

Replacement Parts

UltraKlear ® 1000 Replacement Parts| UltraKlear ® 2500 Replacement Parts| UltraKlear ® 5000 Replacement Parts
---|---|---
No.| Item number/description| No.| Item number/description| No.| Item number/description
1.| 95039 – 14-Watt High-Output UV Bulb| 1.| 95040 – 28-Watt High-Output UV Bulb| 1.| 95041 – 55-Watt High-Output UV Bulb
2.| 95045 – 14-Watt UV Quartz Sleeve| 2.| 95046 – 28-Watt UV Quartz Sleeve| 2.| 95047 – 55-Watt UV Quartz Sleeve
3.| 95042 – 14-Watt UV Corkscrew Sleeve| 3.| 95043 – 28-Watt UV Corkscrew Sleeve| 3.| 95044 – 55-Watt UV Corkscrew Sleeve
4.| 95048 – 14-Watt Ballast Kit| 4.| 95049 – 28-Watt Ballast Kit| 4.| 95050 – 55-Watt Ballast Kit
5.| 95051 – Gasket Kit (8)| 5.| 95051 – Gasket Kit (8)| 5.| 95051 – Gasket Kit (8)
6.| 95052 – Fittings Kit| 6.| 95052 – Fittings Kit| 6.| 95052 – Fittings Kit

Warranty Information

3 YEAR WARRANTY
Aquascape warrants that the UltraKlear UV Clarifier will be free of manufacturing defects for three years from date of purchase. Proof of purchase required. Warranty does not cover damage resulting from electrical supply problems, lightning, negligent handling, misuse or lack of reasonable maintenance or care. Warranty does not cover parts subject to normal wear, such as filter media and U.V. bulbs. This product should only be operated in fresh water without corrosive chemicals like chlorine or bromine. If upon Aquascape’s inspection, the UltraKlear shows evidence of a manufacturing defect, Aquascape’s liability is limited, at Aquascape’s option, to the repair of the defect, replacement of the defective product, or refund of the original purchase price. The warranty excludes costs of labor, removal of product, shipping and expenses related to the installation and re-installation of the product. All products that include plumbing (tubing, pumps, check valves) need to be properly drained and winterized otherwise warranty is null and void. No liability for loss or damage of any nature or kind, whether arising out of or from the use of the product, whether defective or not defective, is assumed by Aquascape, Inc. or its affiliates. Aquascape shall not be liable for any incidental, consequential or other damages arising under any theory of law whatsoever.

• For more information about our company or products, please visit our website at aquascapeinc.com or call us at US 866-877-6637 CAN 866-766-3426
• ©2022 Aquascape, Inc.
• All Worldwide Rights Reserved
• US 866-877-6637 | ☎ CAN 866-766-3426 | aquascapeinc.com
• Contact Us
• For more information about our company or products, please visit our website at aquascapeinc.com or call US 866-877-6637 CAN 866-766-3426.
• Find us on:
• facebook.com/aquascapeinc
• youtube.com/aquascape4
• pinterest.com/aquascapeinc
• instagram.com/aquascape_inc/

Documents / Resources

| Aquascape 95036 Ultraklear UV Clarifier [pdf] Instructions
95036 Ultraklear UV Clarifier, 95036, Ultraklear UV Clarifier, UV Clarifier, Clarifier
---|---

References

• Water Features, Outdoor Fountains, Pond Pumps by Aquascape

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>