Libratone AIR 2nd Gen User Manual
- June 12, 2024
- LIBRATONE
Table of Contents
Libratone AIR 2nd Gen
USER MANUAL
APP DOWNLOAD
Search for ‘Libratone’ in Apple App Store or Google Play to download App.
BUTTON AND INTERFACE INSTRUCTION
① Function Button ② Indicator Light (LED) ③ Charging Port
- To avoid damage of the charging port, please make sure you dry your earbuds of any humidity before putting them back into the charging case.
POWER ON AND OFF
When the earbuds are in the charging case, just take them out and they will power on automatically and you can instantly use them.
To power the earbuds off, put them back into the charging case and close the lid.
PAIR AND CONNECT
1. Place both earbuds in the charging case with the lid open, press and hold the button on the back of the case until the L and R indicator lights start to pulse. Then they are ready to pair.
2. Search for the earbuds and connect them in the ‘Settings’ – ‘Bluetooth’ on your mobile device.
BASIC OPERATION
Playback Control
Double tap either earbud in use to play/pause music.
- With an incoming call or during a call, double tap is always used to answer/hang up phone calls.
Function Button
Short press to check battery level of the charging case
Press and hold the function button for 2s, when both earbuds are in the charging case, to put them into Bluetooth pairing mode.
ACTIVATE VOICE ASSISTANT
Double or triple tap either earbud in use to activate the default voice assistant of mobile devices. Use Libratone App to enable the feature first.
MULTIPLE CONNECTED DEVICES
Earphones can support being used among 3 connected devices. Double or triple tap either earbud in use to do the switching. Use Libratone App to enable/modify the feature.
TAP FUNCTION SETTINGS
The tap function can be customized in Libratone app.
- The following picture is for reference, the specific functions are subject to the real product.
WEAR DETECT
Take off any earbud and music will be paused.
Put any earbud back on and music will resume playing or phone calls will be answered automatically.
SLEEP
Put the earbud on table without music playing or other recent interactions and it will enter sleep mode automatically for power saving. The Bluetooth connection will be disconnected.
Pick up the earbud to wake it up from sleep mode. It will automatically reconnect with the last used device.
STATUS INDICATION
Earbud Status Indication
The light will pulse white at Bluetooth pairing mode
The light will blink once when the earbud is put into the case
The light will blink red continuously if the two earbuds in the case are not a pair
The light will pulse pink continuously when updating the software
(At the above situations, if the color of the light is not specified, the red light will blink when the earbud has low battery, otherwise the white light will blink.)
Charging Case Battery Indication
Short press the function button to check the battery level, indicated via different light blinks around the charging port.
High: Triple blinks white
Middle : Double blinks white
Low : Blinks white
Need to charge: Blinks red
Charging Indication
When charging, the light around the charging port is solid on. When fully charged, the light turns off automatically.
FAQ
Playback is interrupted?
Normally, the working distance is 10m at a non-sheltered area. If the distance
to the playing device is more than 10m the music playback will be interrupted.
- Tips: Due to the characteristics of the true wireless earphones, there will be intermittent playback in an environment with very strong wireless interference.
The earphone cannot connect to the phone paired before
If you cannot connect, please delete the earphone from the Bluetooth device
list in the phone, press the Function button for 2 seconds to enter Bluetooth
pairing mode and then pair with the phone again.
Use a new earbud with an old one
If one earbud is lost and you buy a new one, please place both earbuds in the
charging case, press and hold the function button for 2s to put them into
Bluetooth pairing mode. Then you can connect them with your phone.
The earbuds cannot be displayed or accessed normally in the App
To ensure a stable connection between the earbuds and the App, we suggest to
use a mobile phone with BT4.2 or newer. You can check the BT version of your
mobile phone on its official website or other related channels.
- Phone, tablet computer or any other device with Bluetooth are all applicable. This User Manual takes phone as an example for operation instruction.
PRODUCT SPECIFICATION
Product Name: Libratone AIR
Speaker: 2*5.3mm
Sensitivity: 105dB@1mW,1kHz
Frequency Response Range: 20~20kHz
Audio Input: Bluetooth
Playing Time: 8hours (Earphone); 32hours (Earphone + Charging case)
Weight: 5.5g (Earbud)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>