Libratone ZIPP 2 User Manual

June 12, 2024
LIBRATONE

Libratone ZIPP 2 User Manual

Libratone ZIPP 2

APP DOWNLOAD

Scan the QR code/click the button or search for ‘Libratone’ in the Apple App Store and major domestic Android markets to download.

Download

CONNECT TO WI-FI

start up

1. Press and hold the power button for 2 seconds

2. The top bird lights up

3. Wait a few seconds

  • It is recommended to plug in the power supply when using for the first time connect

1. When it is turned on for the first time, it will automatically enter the connection mode, and the indicator light will flash alternately left and right

2. Run the App and follow the prompts to complete the Wi-Fi connection

3. Wait for the speaker to be connected successfully, and the light ring around the bird will be lit Finish

Very good! The speaker is now connected to your Wi-Fi. Mobile phones connected to this Wi-Fi can push music to the speaker through Wi-Fi

Want to change your Wi-Fi connection?

1. Long press the bird to enter the setting interface

2. Click the connect icon

3. The indicator light flashes left and right alternately to enter the connection mode.

4. Run the App, click “+” and follow the prompts to complete the Wi-Fi connection.

VOICE ASSISTANT

Complete the Wi-Fi connection in the Libratone App and confirm to log in to the voice assistant with your account. or:

1. Enter the speaker details page in the Libratone App, click the microphone icon

2. Log in with your account to turn on the voice assistant

3. Now you can control music playback, listen to news, set alarms, etc. through voice

PLAY MUSIC

AirPlay – Apple iOS devices

1. Swipe up from the bottom of the screen to open the Control Center and click the “Music” icon in the upper right corner

2. Click the icon in the upper right corner to open the device list and select the Libratone product

3. Open your favorite music player and click play to enjoy the music.

  • Before performing the above operations, please make sure that your mobile phone and stereo are connected to the same Wi-Fi android device

(Take QQ Music as an example)

Please enter ‘QPlay and Car Music’ in the settings of QQ Music and turn on ‘Speaker’

1. Find the QPlay icon at the bottom left of the playback page and click

2. Choose Libratone speakers

3. Click play to enjoy the music

  • Before performing the above operations, please ensure that your mobile phone and speaker are connected to the same Wi-Fi. Any music app that supports DLNA can play normally.

TOUCH INTERFACE

Touch interface

① Status LED

playback control

Tap the bird to play/pause music or answer/end calls

Tap twice to switch to the next song Tap three times to switch to the previous song volume control

Rotate your finger clockwise or counterclockwise on the touch interface to adjust the volume

HUSH

Covering the entire touch interface with your palm temporarily reduces the volume

Wake up voice assistant

Just say the wake word or click the microphone icon to wake up the voice assistant

Power display

Short press the power button in the power-on state to display the current remaining power

Set interface

Long press the bird to enter the settings interface

① Microphone

Click the icon to turn on/off the microphone/voice assistant

② connection

Click the icon to enter connection mode

③ Environmental calibration

Click the icon to start environmental calibration

④ Favorite channel

Built-in 5 online channels, click the icon to switch channels and play

  • The content of 5 channels can be changed through the App

⑤Multi-sound combination

Click the icon to start/end forming a group or join a group

Long press to exit the group

⑥ Software upgrade

Click the icon to check or start software upgrade

STATUS DESCRIPTION

voice assistant

When the voice assistant is awakened, the bird and light ring flash twice

When the voice assistant is turned off, the microphone icon on the touch interface disappears

When Alexa is enabled and there are unread notifications from Amazon, the light ring flashes every 10 seconds in the not playing state favorite channel

The heart icon lights up to indicate that a favorite channel is currently playing

Mute

The white light at the bottom breathes once every 5 seconds to indicate the current mute state sleep

After entering sleep mode, only the bottom white light is always on, and all other lights are turned off.

Waiting

Please wait patiently when the continuously rotating lights appear on the touch interface

Warning Light

The red light flashes 3 times to indicate an error.

The red light is always on to indicate that the battery is low. Please connect the power supply as soon as possible.

MULTI-SPEAKER COMBINATION

Patented SOUNDSPACE LINK technology, which can combine multiple speakers in the same network to play synchronously Create a combination

1. Short press the ‘multi-speaker combination’ icon on speaker 1, the prompt will sound and initiate a combination invitation

2. Other audio icons start to flash, short press the flashing icons in sequence to join the combination.

3. After the group is established successfully, a prompt tone will be heard

  • After the combination is completed, the name of the speaker will be automatically changed to ‘LINK XXXX’, please follow the normal steps to play music

Exit the group

1. Long press the ‘multi-sound combination’ icon on the sound system 3 in the combination for 2 seconds

2. Speaker 3 emits a prompt tone

3. Audio 3 successfully exited the group

BLUETOOTH PLAYBACK

1. Long press the bird to enter the setting interface, click the connection icon to enter the connection mode

2. Enter the Bluetooth settings of your phone and select the Libratone speaker for pairing connection.

3. Open the music app commonly used on the mobile phone and click to play to enjoy the music

  • When the stereo and mobile phone are connected by bluetooth, tap the bird to answer/hang up the call. Use ‘HUSH’ to reject incoming calls

OTHER WAYS TO PLAY

Play via wired input to speakers

Insert the USB flash drive into the speaker. After hearing the beep of successful connection, the speaker will automatically start playing when it is ready.

① Charging indicator light ② Power button ③ Power interface ④ Wired input interface ⑤ USB port

COMMON PROBLEM

How to use Wi-Fi speakers correctly?

1. The Wi-Fi router plays an important role in the use of Wi-Fi speakers. The music or control commands pushed by devices such as mobile phones or tablets to the speakers are transmitted through the router; therefore, the speakers must be configured before use. , make sure the speaker and mobile phone or tablet are connected to the same Wi-Fi router

2. After the speaker is connected to the Internet, you can directly access the Internet to obtain playback content, just like a mobile phone can directly access the Internet after being connected to Wi-Fi.

3. Devices such as mobile phones or tablets connected to the same Wi-Fi as the speaker can control the speaker or play music directly through the Libratone App

How to set up audio on iOS device without using App?
iOS devices provide a dedicated Wi-Fi configuration method. When the speaker enters the connection mode, open the Wi-Fi settings page of the iOS device, find “Set up a new “airplay” speaker” below, select the Libratone speaker to be configured in the list, and follow the prompts to complete the configuration.

Is playback stuttering or noisy?
The speaker can be used within the normal coverage of Wi-Fi. If it is too far away from the Wi-Fi router, the Wi-Fi signal is poor, or there are too many Wi-Fi routers nearby, and there is strong interference, it will cause intermittent playback or noise

You can check the Wi-Fi signal strength of the speaker through the Libratone App

What audio input does the speaker support and how to switch between various audio sources?
The speaker supports Wi-Fi, Bluetooth, wired input and U disk playback
Various audio sources can be connected at the same time, and the speaker will automatically switch to the latest audio source input. Re-plug the audio cable and USB flash drive to switch the audio source to wired input or USB flash drive, or switch in the Libratone App

How to change the 5 preset channels on the speaker?
1. Select the favorite channel in Libratone App and play it on your product
2. Click the ‘Add to Favorites’ icon on the bottom left of the page and select the channel you want to replace in the list

How to play U disk?
Insert the U disk into the speaker, and it will automatically start playing after the connection is successful
The audio formats currently supported by USB flash drive playback are as follows:
.MP3 .LPCM .WAV .FLAC .WMA/.ASF .OGG .AAC/.M4A .AIFF .APE

Can I play using a Wi-Fi connection outdoors?
It can be used in any area covered by Wi-Fi. If you want to take the speaker out and listen to music, use Bluetooth to connect and play it where there is no Wi-Fi
For operation, please refer to the “Bluetooth Playback” page of this user manual

SPECIFICATION

MODEL: LTH310
vocal tract: 1.1
Speaker: 1 x 4″ woofer unit; 1 x 1.5″ tweeter unit; 2 x 4″ passive radiators
Peak power: 100W
SNR: 97dBA
Maximum sound pressure level: 99dBA@1m
Frequency Range:45~20kHz
Audio input: Wi-Fi, Bluetooth, wired input, USB
Operating hours: 12 hours
Charging time:<3 hours
Product Size: Diameter 122mm, height 260mm

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals