Libratone TRACK Air User Manual

: June 12, 2024
: LIBRATONE

Table of Contents

Libratone TRACK Air
APP DOWNLOAD
BUTTON AND INTERFACE INSTRUCTION
FIRST USE AND PAIRING
CONNECT
POWER ON AND OFF
BASIC OPERATION
WEAR DETECT
SLEEP
CONNECT TO A NEW DEVICE
STATUS INDICATION
Normal Status Indication
FAQ
PRODUCT SPECIFICATION
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Libratone TRACK Air

APP DOWNLOAD

Scan the QR code/press ‘Download’ button or search ‘Libratone’ in Apple App Store or Google Play to download App

APP DOWNLOAD

DOWNLOAD

BUTTON AND INTERFACE INSTRUCTION

BUTTON

① Function Button ② Indicator Light (LED) ③ Charging Port

To avoid damage of the charging port, please make sure you dry your earbuds of water before putting them back to the charging case

FIRST USE AND PAIRING

Put the two earbuds into the charging case to power them on. They will enter pairing mode automatically

CONNECT

1. Connect the left earbud

CONNECT

Connect the left earbud with your phone via Bluetooth, when the earbuds are in pairing mode

When the two earbuds are in the charging case, long press the function button for 2s to enter pairing mode. The light will fast blink continuously

2. Pair the right earbud

Right after the left earbud is connected, a pop up window will appear on your phone. Click ‘Pair’ or ‘Ok’, and the right earbud is paired with the phone to complete the connection

3. Connected

Connected

Done! Put on the earbuds and enjoy your music.

Each time it’s used, the earbud which is taken out of the charging case first will automatically become the master one. And the master earbud will connect to the moible phone and synchronously transfer the signal to the other one

POWER ON AND OFF

When the earbuds are in the charging case, just take them out and then will power on automatically, so you can use them right away

power

To power the earbuds off, put them back into the charging case and close the cover

BASIC OPERATION

Gesture Control

Gesture Control

To play/pause music or answer/end phones calls, double tap the earbuds. The function can be customized in the Libratone app

Function Button

Function Button

Short press the function button in the charging case, to check it’s battery level. A red light will blink when the battery is low, or else the white light will blink

When both earbuds are in the charging case, press and hold the function button for 2s to enter Bluetooth pairing mode

WEAR DETECT

If you take both earbuds off, music will be paused or phone calls will be transferred back to your phone automatically

The earbuds will resume playing or answer phone calls automatically when you put any one of them back on

SLEEP

If there is no music playing, or no other interaction with the earbud for a while, it will enter sleep mode automatically for power saving. The earbud will be disconnected when in sleep mode

Pick up the earbud

Pick up the earbud to wake it up from sleep mode. It will automatically reconnect with the last used device

CONNECT TO A NEW DEVICE

Make sure the two earbuds are in the charging case. Long press the function button for 2s to enter pairing mode. The light will fast blink continuously. Follow the steps above to complete the connection

Watch the video guide (IOS)

Watch the video guide (Android)

STATUS INDICATION

① Indicator Light (LED)

Normal Status Indication

The LED keeps blinking when Bluetooth pairing mode is activated

The LED will blink once to confirm or respond to the following actions:
. Opening the charging case
. Short pressing the Function Button
. Putting in/taking out any earbud
. Plugging in/out the charging cable

The white and red LEDs will both breathe during the software update process

(At the above situations, if the color of the LED is not specified, the red LED will blink when the charging case is low battery, or else the white LED will blink)

Charging Indication

White LED

White LED is solid on when charging(The LED is red when low battery)

LED is off

The LED is off when fully charged

FAQ

We suggest to keep both the left and the right earbud in the Bluetooth device list on your phone

Each time it’s used, the earbud which is taken out first will become the master one automatically. It will connect to your phone directly and transfer the audio signal to the other one. And the master one can work as a signal headset.

Firstly, if any one of the earbud is not in the Bluetooth device list, when it’s taken out, it can’t work independently.

Secondly, if both earbuds are in the Bluetooth device list, they can be the master one in turn to balance the power consumption of them, which will extend the overall working time.

Playback is interrupted?

Normally, the working distance is 10m at a non-sheltered area. If the distance to the playing device is more than 10m the music playback will be interrupted.

Tips: Due to the characteristics of the true wireless earphones, there will be intermittent playback in an environment with very strong wireless interference

The earphone cannot connect to the phone paired before

If you can’t connect, please delete the earphone from the Bluetooth device list in the phone, press the Function button for 2 seconds to enter Bluetooth pairing mode and then pair with the phone again.

Use a new earbud with an old one

If an earbud is lost and you buy a new one, you have to pair the two earbuds first. You put both earbuds in the charging case, double press and press-and- hold the function button for 5s. When the white LED blinks, the earbuds are paired. They will do an automatic factory reset and enter pairing mode.

The earbuds cannot be displayed or accessed normally in the App

To ensure a stable connection between the earbuds and the App, we suggest to use a mobile phone with BT4.2 or newer. You can check the BT version of your mobile phone on its official website or other related channels.