Style SELECTIONS FSI 1436F WHTE Beatrix 48-in to 84-in White Steel Single Curtain Rod Instruction Manual
- June 13, 2024
- Style SELECTIONS
Table of Contents
ITEM #5276612/ 5135543/ 5135545/ 5135547/ 5276613/ 5276600/ 5276596/
5276604/ 5276602/ 5276601/ 5276605/ 5276597/ 5276603/ 5135544/ 5135546/
5135548
DRAPERY ROD
FSI 1436F WHTE Beatrix 48-in to 84-in White Steel Single Curtain Rod
STYLE SELECTIONS and logo design are trademarks or registered trademarks of
LF, LLC. All rights reserved.
MODEL #FSI 1436E WHTE/ FSI 1436E MBLK/ FSI 1436E DORB/ FSI 1436E BNIC/
FSI 1436F WHTE/ FSI 1474X BGLD/ FSI 1474X MBLK/ FSI 1474X BNIC/ FSI 1474X
DORB/ FSI 1474Y BGLD/
FSI 1474Y BNIC/ FSI 1474Y MBLK/ FSI 1474Y DORB/ FSI 1436F MBLK/ FSI 1436F
DORB/ FSI 1436F BNIC
Thank you for purchasing this Style Selections product. We’ve created these
easy-to-follow instructions to ensure you spend your time enjoying the product
in-stead of putting it together. But, if you need more information than what
is provided here, please visit Lowes.com , search the
item number and refer to the Guides & Documents tab on the product’s page.
If the item is no longer for sale, or if you have any questions or problems,
please call our customer service department at
877-888-8225, 8 a.m. – 8 p.m., EST,
Monday – Sunday. You could also contact us at
partsplus@lowes.com.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 30 minutes
TOOLS REQUIRED (NOT INCLUDED)
FEELING CONFIDENT? START YOUR NEXT PROJECT
- Visit lowes.com for more information./
| PROBLEM | POSSIBLE CAUSE | CORRECTIVE ACTION |
|---|---|---|
| Drapery rod not level | Drapery hooks not installed correctly. | Make sure to |
use level (not included) during installation.
Drapery rod hook is loose.| Drapery hooks not anchored correctly.| Attach
drapery hooks to wall studs f possible. Use anchors
and screws supplied if you can’t attach to stud.
CARE AND MAINTENANCE
- Clean with a soft cloth.
- Do not use abrasive cleaning agents, solvents or polishes as they may damage the finish.
PACKAGE CONTENTS
INSTALLATION OVERVIEW
-
Using bracket as a guide, adjust to desired height and mark location on wall for mounting screws.
-
Remove bracket from wall. Drill pilot hole using 3/16 in. bit (not included) and insert wall anchors. NOTE
Anchors are not needed for all installation types. -
Attach bracket to wall using screws provided.
NOTE
Repeat steps 1 to 3 for additional brackets. Use level (not included) if necessary. -
Fit drape(s) (not included) on rod.
5A Fit the rod, with drapes (not included), on the mounting brackets and position the finials as desired. Tighten the screws on each bracket to secure.
5B Fit the rod, with drapes (not included), on the mounting brackets and position the finials as desired. Tighten the screws on each bracket to secure.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>