EnviroLite DRF6WHWH9105C Selectable CCT Integrated LED White Canless Wafer Instruction Manual
- June 13, 2024
- EnviroLite
Table of Contents
EnviroLite DRF6WHWH9105C Selectable CCT Integrated LED White Canless Wafer
Instruction Manual
DOWNLIGHT
Please read the instructions carefully and save these instructions, as you may
need them at a later date.
CAUTION
Turn power off at circuit breaker before beginning fixture installation to
avoid electrical shock.
GENERAL
All electrical connections must be in accordance with local and National
Electrical Code (N.E.C.) standards. If you are unfamiliar with proper
electrical wiring connections obtain the services of a qualified electrician.
Remove the fixture and the mounting package from the box and make sure that no parts are missing by referencing the illustrations on the installation instructions.
INSTALLATION INSTRUCTIONS
- Mark the opening for the hole of the frame on the ceiling. Use a keyhole saw to cut the hole out. [Fig. 1]
- Pull the quick connector down from hole.
- Remove a knockout to bring the supply wires into the wire box. [Fig. 2]
- Connect the quick connector from the plaster frame to the quick connector from the fixture. [Fig. 3]
- Adjust the color temperature using the CCT switch. [Fig. 5]
- Press the tension springs up and into the ceiling hole. [Fig. 4]
DIMMING
For a complete list of compatible dimmers, please look up the item number
listed on the cover of this instruction manual at www.envirolite-
LED.com.
FCC NOTICE
WARNING: Changes or modification to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC responsible party: Cordelia Lighting
Company name: Cordelia Lighting
Address: 20101 S Santa Fe Avenue East Rancho Dominguez, CA 90221
Phone: 800-345-0542
NOTICE: This device has been tested and found to comply with the limits for a Class B digital device, pursuant to part 14 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference can be determined by turning the equipment off and on, the user is encouraged to try to correct the interface by one or more of the following measures:
-
* Reorient or relocate the receiving antenna.- Increase the separation between the device and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
WARRANTY
Envirolite ( r) warrants this product to be free from defects in material
and workmanship for five years from the original date of purchase by the
consumer. This warranty is limited to the counter replacement at the time of
purchase, with the original purchase receipt. Envirolite ( r) will not be
liable for the loss or damage of any kind, incidental or consequential damages
of any kind, whether based on warranty contract or negligence, and arising in
connection with the sale, use or repair of the product claimed to be
defective. Some states do not allow the exclusion or limitation of incidental
or consequential damages so the above limitation may not apply to you. This
warranty gives you specific legal rights and you may also have other rights,
which vary from state to state. Misuse, accident, improper installation or
maintenance will also void the warranty.
