MSI PRO B760-P DDR4 II Motherboard User Guide

PRO B760-P DDR4 II
Motherboard
User Guide

Quick Start

Thank you for purchasing a new motherboard from MSI®. This Quick Start section provides demonstration diagrams about how to install your computer. Some of the installations also provide video demonstrations. Please link to the URL to watch it with the web browser on your phone or tablet. You may have even link to the URL by scanning the QR code.
Preparing Tools and Components

Safety Information

• The components included in this package are prone to damage from electrostatic discharge (ESD). Please adhere to the following instructions to ensure successful computer assembly.
• Ensure that all components are securely connected. Loose connections may cause the computer to not recognize a component or fail to start.
• Hold the motherboard by the edges to avoid touching sensitive components.
• It is recommended to wear an electrostatic discharge (ESD) wrist strap when handling the motherboard to prevent electrostatic damage. If an ESD wrist strap is not available, discharge yourself of static electricity by touching another metal object before handling the motherboard.
• Store the motherboard in an electrostatic shielding container or on an anti-static pad whenever the motherboard is not installed.
• Before turning on the computer, ensure that there are no loose screws or metal components on the motherboard or anywhere within the computer case.
• Do not boot the computer before installation is completed. This could cause permanent damage to the components as well as injury to the user.
• If you need help during any installation step, please consult a certified computer technician.
• Always turn off the power supply and unplug the power cord from the power outlet before installing or removing any computer component.
• Keep this user guide for future reference.
• Keep this motherboard away from humidity.
• Make sure that your electrical outlet provides the same voltage as is indicated on the PSU, before connecting the PSU to the electrical outlet.
• Place the power cord such a way that people can not step on it. Do not place anything over the power cord.
• All cautions and warnings on the motherboard should be noted.
• If any of the following situations arises, get the motherboard checked by service personnel:
• Liquid has penetrated into the computer.
•  The motherboard has been exposed to moisture.
• The motherboard does not work well or you can not get it work according to user guide.
• The motherboard has been dropped and damaged.
• The motherboard has obvious sign of breakage.
• Do not leave this motherboard in an environment above 60°C (140°F), it may damage the motherboard.

Case stand-off notification
To prevent damage to the motherboard, any unnecessary mounting stand-off between the motherboard circuits and the computer case is prohibited. The Case standoff keep out zone signs will be marked on the backside of motherboard (as shown below) to serve as a warning to user.
Avoid collision notification
Protective paint is printed around each screw hole to prevent parts from being scratched.

Installing a Processor

https://youtu.be/KMf9oIDsGes

Installing DDR4 memory

https://youtu.be/XiNmkDNZcZk

Connecting the Front Panel Header

http://youtu.be/DPELIdVNZUI

Installing the Motherboard

https://youtu.be/wWI6Qt51Wnc

Connecting the Power Connectors

http://youtu.be/gkDYyR_83I4

Installing SATA Drives

http://youtu.be/RZsMpqxythc

Installing a Graphics Card

http://youtu.be/mG0GZpr9w_A

Connecting Peripheral Devices

|
---|---

Specifications

CPU| • Supports 12th/ 13th Gen Intel® Core™ Processors, Pentium® Gold and Celeron® Processors*
• Processor socket LGA1700

• Please go to www.msi.com to get the newest support status as new processors are released.
  ---|---
  Chipset| Intel® B760 Chipset
  Memory| • 4x DDR4 memory slots, supporting up to 128GB*
  • Supports 1R 2133/ 2666/ 3200 MHz (by JEDEC & POR)
  • Max overclocking frequency:
  • 1DPC 1R Max speed up to 5333+ MHz
  • 1DPC 2R Max speed up to 4800+ MHz
  • 2DPC 1R Max speed up to 4400+ MHz
  • 2DPC 2R Max speed up to 4000+ MHz
  • Supports Dual-Channel mode
  • Supports non-ECC, un-buffered memory
  • Supports Intel® Extreme Memory Profile (XMP)
• Please refer to www.msi.com for more information on compatible memory.
  Expansion Slots| • 5x PCIe x16 slots
  • PCI_E1 slot (From CPU)
  • Supports PCIe 4.0 x16
  • PCI_E2 slot (From B760 chipset)
  • Supports PCIe 3.0 x1
  • PCI_E3 slot (From B760 chipset)
  • Supports PCIe 4.0 x4
  • PCI_E4 slot (From B760 chipset)
  • Supports PCIe 3.0 x1
  • PCI_E5 slot (From B760 chipset)
  • Supports PCIe 3.0 x1
  • 1 x M.2 slot (Key E) for the Wi-Fi module
  Onboard Graphics| • 1x HDMI™ 2.1 port with HDR, supports a maximum resolution of 4K 60Hz*/*
  • 1x DisplayPort 1.4 port with HBR2, supports a maximum resolution of 4K 60Hz/**
• Available only on processors featuring integrated graphics.
  ** Graphics specifications may vary depending on the CPU installed.
  ---|---
  SATA Ports| • 4x SATA 6Gb/s ports (From B760 chipset)
  M.2 SSD Slot| • 2x M.2 slots (Key M)
  • M2_1 slot (From CPU)
  • Supports up to PCIe 4.0 x4
  • Supports 2242/ 2260/ 2280 storage devices
  • M2_2 slot (From B760 chipset)
  • Supports up to PCIe 4.0 x4
  • Supports 2242/ 2260/ 2280 storage devices
  RAID| Supports RAID 0, RAID 1, RAID 5 and RAID 10 for SATA storage devices
  Audio| Realtek® ALC897 Codec
  • 7.1-Channel High Definition Audio
  • Supports S/PDIF output
  LAN| • 1x Realtek® 8125BG 2.5Gbps LAN controller
  Power Connectors| • 1x 24-pin ATX main power connector
  • 1x 8-pin +12V power connector
  •1x 4-pin ATX 12V power connector
  Internal USB Connectors| •  1x USB 3.2 Gen 1 5Gbps Type-C front panel connector (From B760 chipset)
  •  2x USB 3.2 Gen 1 5Gbps Type-A connectors (From Hub GL3523)
  • Supports additional 4 USB 3.2 Gen 1 5Gbps ports
  •  2x USB 2.0 Type-A connectors (From Hub-GL850G)
  • Support additional 4 USB 2.0 ports
  ---|---
  Fan Connectors| •  1x 4-pin CPU fan connector
  •  1x 4-pin water-pump fan connector
  •  5x 4-pin system fan connectors
  System Connectors| •  1x Front panel audio connector
  •  2x System panel connectors
  •  1x Chassis Intrusion connector
  •  1x TPM module connector
  •  1x Serial port connector
  •  1x TBT connector (Supports RTD3)
  Jumpers| •  1x Clear CMOS jumper
  LED Features| •  2x 4-pin RGB LED connectors
  •  2x 3-pin A-RAINBOW V2 (ARGB Gen2) LED connectors
  •  4x EZ Debug LED
  Back Panel Connectors| • 2x USB 2.0 Type-A ports (From B760 chipset)
  • 1x DisplayPort
  • 1x HDMI™ port
  • 2x USB 3.2 Gen 1 5Gbps Type-A ports (From B760 chipset)
  • 1x USB 3.2 Gen 2 10Gbps Type-C port (From B760 chipset)
  • 1x 2.5Gbps LAN (RJ45) port
  • 5x audio jacks
  • 1x Optical S/PDIF Out connector
  ---|---
  I/O Controller| NUVOTON NCT6687 Controller Chip
  Hardware Monitor| • CPU/ System/ Chipset temperature detection
  • CPU/ System/ Pump fan speed detection
  • CPU/ System/ Pump fan speed control
  Form Factor| • ATX Form Factor
  • 9.6 in. x 12 in. (244 mm x 304 mm)
  BIOS Features| • 1x 256 Mb flash
  • UEFI AMI BIOS
  • ACPI 6.4, SMBIOS 3.5
  • Multi-language
  Software| • Drivers
  • MSI Center
  • Intel Extreme Tuning Utility
  • MSI APP Player (BlueStacks)
  • CPU-Z MSI GAMING
  • Norton 360 Deluxe
  • AIDA64 Extreme – MSI Edition

Special Features

MSI Center Features

• Mystic light
• Ambient Link
• Froze AI Cooling
• User Scenario
• True Color
• Live Update
• Hardware Monitoring
• Super Charger
• Devices Speed Up
•  Smart Image Finder
• MSI Companion
• System Diagnosis
• Smart Fan Control

Thermal Features

• All Aluminum Design
• Extended Heatsink Design
• M.2 Shield Froze
• K7 MOSFET thermal pad / Extra choke pad
• Fan headers (CPU + PUMP + SYSTEM)

Performance

• Core Boost
• VRM Power Design (VCPU / VGT / AUX)
• Dual CPU Power
• Memory Boost
• Lightning Gen 4 PCI-E / M.2 Slot
• Front USB Type-C
• 2oz Copper thickened PCB

DIY Friendly

• PCI-E Steel Armor
• EZ M.2 Clip
• EZ DEBUG LED

Audio

• Audio Boost

RGB

• Mystic Light Extension (RGB)
• Mystic Light Extension (A-RAINBOW V2)
• Ambient Link

BIOS

• Click BIOS 5

Package Contents

Please check the contents of your motherboard package. It should contain:
Board

• 1x Motherboard

Documentation

• 1x Quick installation guide
• 1x European Union regulatory notice

Cables

• 1x SATA 6Gb/s cable

Accessories

• 1x EZ M.2 Clip package (1 set/pack)
• 1x M.2 screw and standoff package (1 set/pack)
• 1x IO shielding

⚠ Important
If any of the above items are damaged or missing, please contact your retailer.

Back Panel Connectors

LAN Port LED Status Table Audio Jacks Connection
Audio jacks to headphone and microphone diagramAudio jacks to stereo speakers diagramAudio jacks to 4-channel speakers diagramAudio jacks to 5.1-channel speakers diagramAudio jacks to 7.1-channel speakers diagram

Overview of Components

CPU Socket Introduction to the LGA1700 CPU
The surface of the LGA1700 CPU has four notches and a golden triangle to assist in correctly lining up the CPU for motherboard placement. The golden triangle is the Pin 1 indicator.
Important

• Always unplug the power cord from the power outlet before installing or removing the CPU.

• Please retain the CPU protective cap after installing the processor. MSI will deal with Return Merchandise Authorization (RMA) requests if only the motherboard comes with the protective cap on the CPU socket.

• When installing a CPU, always remember to install a CPU heatsink. A CPU heatsink is necessary to prevent overheating and maintain system stability.

• Confirm that the CPU heatsink has formed a tight seal with the CPU before booting your system.

• Overheating can seriously damage the CPU and motherboard. Always make sure the cooling fans work properly to protect the CPU from overheating. Be sure to apply an even layer of thermal paste (or thermal tape) between the CPU and the heatsink to
  enhance heat dissipation.

• Whenever the CPU is not installed, always protect the CPU socket pins by covering the socket with the plastic cap.

• If you purchased a separate CPU and heatsink/ cooler, Please refer to the documentation in the heatsink/ cooler package for more details about installation.

• This motherboard is designed to support overclocking. Before attempting to overclock, please make sure that all other system components can tolerate overclocking. Any attempt to operate beyond product specifications is not recommended. MSI® does not guarantee the damages or risks caused by inadequate operation beyond product specifications.

DIMM Slots Memory module installation Important

• Always insert memory modules in the DIMMA2 slot first.
• To ensure system stability for Dual channel mode, memory modules must be of the same type, number and density.
• Some memory modules may operate at a lower frequency than the marked value when overclocking due to the memory frequency operates dependent on its Serial Presence Detect (SPD). Go to BIOS and find the DRAM Frequency to set the memory frequency if you want to operate the memory at the marked or at a higher frequency.
• It is recommended to use a more efficient memory cooling system for full DIMMs installation or overclocking.
• The stability and compatibility of installed memory module depend on installed CPU and devices when overclocking.
• Please refer to www.msi.com for more information on compatible memory.

PCI_E1~5: PCIe Expansion Slots Important

• If you install a large and heavy graphics card, you need to use a tool such as MSI Graphics Card Bolster to support its weight to prevent deformation of the slot.
• When adding or removing expansion cards, always turn off the power supply and unplug the power supply power cable from the power outlet. Read the expansion card’s documentation to check for any necessary additional hardware or software changes.

SATA_5~8: SATA 6Gb/s Connectors
These connectors are SATA 6Gb/s interface ports. Each connector can connect to one SATA device. Important

• Please do not fold the SATA cable at a 90-degree angle. Data loss may result during transmission otherwise.
• SATA cables have identical plugs on either sides of the cable. However, it is recommended that the flat connector be connected to the motherboard for space saving purposes.

M2_1~2: M.2 Slots (Key M) Important

• Intel® RST only supports PCIe M.2 SSD with UEFI ROM.
• If your M.2 SSD equips its own heatsink, please remove the M.2 rubber cube in the M.2 slot before installing M.2 SSD. Do not re-install the heatsink supplied with your motherboard.

Installing M.2 module into M2_1 slot

1. Loosen the screws of M.2 Shield Frozr heatsink.
2. Lift up the M.2 Shield Frozr heatsink and remove it.
3. Install the supplied EZ M.2 Clip according to your SSD length. Skip this step if you install 2280 SSD.
4. Insert your M.2 SSD into the M.2 slot at a 30-degree angle.
5. Rotate the EZ M.2 Clip to fix the M.2 SSD.
6. Remove the protective films from the thermal pads under the M.2 Shield Frozr heatsink.
7. Put the M.2 Shield Frozr heatsink back in place and secure it.

Installing M.2 module into M2_2 slot

1. Please install the supplied M.2 standoff in the M.2 slot according to your SSD length.
2. Insert your M.2 SSD into the M.2 slot at a 30-degree angle.
3. Secure the M.2 SSD in place with the supplied M.2 screw.

JAUD1: Front Audio Connector
This connector allows you to connect audio jacks on the front panel.

JFP1, JFP2: Front Panel Connectors
The JFP1 connector controls the power on, power reset, and the LEDs on your PC case/chassis. Power Switch/ Reset Switch headers allow you to connect power button/ reset button. Power LED header connects to LED light on the PC case, and HDD LED header indicates the activity of the hard disk. The JFP2 connector is for Buzzer and Speaker. To connect the cables from PC case to the right pins, please refer to the following images below. Important
Please note that Power LED and HDD LED have positive and negative connection, you need to link up the cable to the corresponding positive and negative port on the motherboard. Otherwise, LEDs won’t work properly.
JCI1: Chassis Intrusion Connector
This connector allows you to connect the chassis intrusion switch cable. Using chassis intrusion detector

1. Connect the JCI1 connector to the chassis intrusion switch/ sensor on the chassis.
2. Close the chassis cover.
3. Go to BIOS > SETTINGS > Security > Chassis Intrusion Configuration.
4. Set Chassis Intrusion to Enabled.
5. Press F10 to save and exit and then press the Enter key to select Yes.
6. Once the chassis cover is opened again, a warning message will be displayed on screen when the computer is turned on.

Resetting the chassis intrusion warning

1. Go to BIOS > SETTINGS > Security > Chassis Intrusion Configuration.
2. Set Chassis Intrusion to Reset.
3. Press F10 to save and exit and then press the Enter key to select Yes.

CPU_PWR1, ATX_PWR1: Power Connectors
These connectors allow you to connect an ATX power supply. CPU_PWR1

CPU_PWR2

ATX_PWR1

Important
Make sure that all the power cables are securely connected to a proper ATX power supply to ensure stable operation of the motherboard.
JCOM1: Serial Port Connector
This connector allows you to connect the optional serial port with bracket.

JUSB1: USB 3.2 Gen 1 Type-C Front Panel Connector
This connector allows you to connect USB 3.2 Gen 1 5Gbps Type-C connector on the front panel. The connector has a foolproof design. When you connect the cable, be sure to connect it with the corresponding orientation. JUSB2~3: USB 3.2 Gen 1 Connectors
These connectors allow you to connect USB 3.2 Gen 1 5Gbps ports on the front panel.

Important
Note that the Power and Ground pins must be connected correctly to avoid possible damage.
JUSB4~5: USB 2.0 Connectors
These connectors allow you to connect USB 2.0 ports on the front panel.

Important

• Note that the VCC and Ground pins must be connected correctly to avoid possible damage.
• In order to recharge your iPad, iPhone and iPod through USB ports, please install MSI Center utility.

JTPM1: TPM Module Connector
This connector is for TPM (Trusted Platform Module). Please refer to the TPM security platform manual for more details and usages.

CPU_FAN1, PUMP_FAN1, SYS_FAN1~5: Fan Connectors
Fan connectors can be classified as PWM (Pulse Width Modulation) Mode or DC Mode.
PWM Mode fan connectors provide constant 12V output and adjust fan speed with speed control signal. DC Mode fan connectors control fan speed by changing voltage.
You can control fans in BIOS> HARDWARE MONITOR panel. It allows you to set DC or PWM to your fan type. Check the Smart Fan Mode, the fan speed will change according to the CPU or system temperature. Uncheck the Smart Fan Mode, the fan will spin at maximum speed.
**Important**
Make sure fans are working properly after switching the PWM/ DC mode.PWM Mode pin definition

DC Mode pin definition

Fan connector specifications

JBAT1: Clear CMOS (Reset BIOS) Jumper
There is CMOS memory onboard that is external powered from a battery located on the motherboard to save system configuration data. If you want to clear the system configuration, set the jumpers to clear the CMOS memory. Resetting BIOS to default values

1. Power off the computer and unplug the power cord.
2. Use a jumper cap to short JBAT1 for about 5-10 seconds.
3. Remove the jumper cap from JBAT1.
4. Plug the power cord and Power on the computer.

BAT1: CMOS Battery
If the CMOS battery is out of charge, the time in the BIOS will be reset and the data of system configuration will be lost. In this case, you need to replace the CMOS battery. Replacing CMOS battery

1. Push the retainer clip to free the battery.
2. Remove the battery from the socket.
3. Install the new CR2032 coin-cell battery with the + sign facing up. Ensure that the retainer holds the battery securely.

WARNING
KEEP OUT OF REACH OF CHILDREN

• Swallowing can lead to chemical burns, perforation of soft tissue, can death.
• Severe burns can occur within 2 hours of ingestion.
• If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

JRGB1~2: RGB LED connectors
The JRGB connectors allow you to connect the 5050 RGB LED strips 12V.

RGB LED Strip Connection RGB LED Fan Connection Important

• The JRGB connector supports up to 2 meters continuous 5050 RGB LED strips (12V/G/R/B) with the maximum power rating of 3A (12V).
• Always turn off the power supply and unplug the power cord from the power outlet before installing or removing the RGB LED strip.
• Please use MSI’s software to control the extended LED strip.

JARGB_V2_1~2: A-RAINBOW V2 (ARGB Gen2) LED Connectors
The JARGB_V2 connectors allow you to connect the ARGB Gen2 and the ARGB-based LED strips. The JARGB_V2 connector supports up to 240 individually addressable RGB LEDs with maximum power rating of 3A (5V).

Addressable RGB LED Strip Connection![MSI PRO B760-P DDR4 II Motherboard

• Strip Connection](https://manuals.plus/wp-content/uploads/2023/09/MSI- PRO-B760-P-DDR4-II-Motherboard-Strip-Connection.png) Addressable RGB LED Fan Connection CAUTION
  Do not connect the wrong type of LED strips. The JRGB connector and the JARGB_V2 connector provide different voltages, and connecting the ARGB 5V LED strip to the JRGB connector will result in damage to the LED strip.
  Important

  • If you connect ARGB Gen1 and ARGB Gen2 LED strips into the same connector, it may cause issues. Please do not mix ARGB Gen1 and ARGB Gen2 LED strips together.
  • It is recommended that you install LED strips with the same specification to achieve the best effects.
  • Always turn off the power supply and unplug the power cord from the power outlet before installing or removing the addressable RGB LED strip.
  • Please use MSI’s software to control the extended LED strip.

Onboard LEDs
EZ Debug LED
These LEDs indicate the debug status of the motherboard. CPU – indicates CPU is not detected or fail.
DRAM – indicates DRAM is not detected or fail.
VGA – indicates GPU is not detected or fail.
BOOT – indicates the booting device is not detected or fail.
Installing OS, Drivers & MSI Center
Please download and update the latest utilities and drivers at www.msi.com
Installing Windows 10/ Windows 11

1. Power on the computer.
2. Insert the Windows 10/ Windows 11 installation disc/USB into your computer.
3. Press the Restart button on the computer case.
4. Press F11 key during the computer POST (Power-On Self Test) to get into Boot Menu.
5. Select the Windows 10/ Windows 11 installation disc/USB from the Boot Menu.
6. Press any key if screen shows Press any key to boot from CD or DVD… message. If not, please skip this step.
7. Follow the instructions on the screen to install Windows 10/ Windows 11.

Installing Drivers with MSI Driver Utility Installer
Important

• Some new network chips have not been natively supported by Windows 10/ Windows 11. It is recommended that the LAN driver be installed before installing drivers with MSI Driver Utility Installer. Please refer to www.msi.com to install the LAN driver for
  your motherboard.

• The MSI Driver Utility Installer will only pop up once. If you cancel or close it during the process, please refer to the Live Update chapter of the MSI Center manual to install the drivers. You can also go to www.msi.com to search your motherboard and download the drivers.

• MSI Driver Utility Installer needs to be installed over the internet.
  1. Start up your computer in Windows 10/ Windows 11.
  2. Select Start > Settings > Windows Update, and then select Check for updates.
  3. MSI Driver Utility Installer will pop up automatically.4. Select the I have read and agree to the MSI Terms of Use check box, and then click Next.5. Check the Select All checkbox in the lower-left corner and click Install to install MSI Center and drivers. The installation progress will be shown at the bottom.6. Once the progress has completed, click Finish.

MSI Center
MSI Center is an application that helps you easily optimize game settings and smoothly use content creation softwares. It also allows you to control and synchronize LED light effects on PCs and other MSI products. With MSI Center, you can customize ideal modes, monitor system performance, and adjust fan speed.
MSI Center User Guide

http://download.msi.com/manual/mb/MSICENTER.pdf

If you would like to know more information about MSI Center, please refer to http://download.msi.com/manual/mb/MSICENTER.pdf or scan the QR code to access.
Important
Functions may vary depending on the product you have.
UEFI BIOS
MSI UEFI BIOS is compatible with UEFI (Unified Extensible Firmware Interface) architecture. UEFI has many new functions and advantages that traditional BIOS cannot achieve, and it will completely replace BIOS in the future. The MSI UEFI BIOS uses UEFI as the default boot mode to take full advantage of the new chipset’s capabilities.
Important
The term BIOS in this user guide refers to UEFI BIOS unless otherwise noted.
UEFI advantages

• Fast booting – UEFI can directly boot the operating system and save the BIOS self test process. And also eliminates the time to switch to CSM mode during POST.
• Supports for hard drive partitions larger than 2 TB.
• Supports more than 4 primary partitions with a GUID Partition Table (GPT).
• Supports unlimited number of partitions.
• Supports full capabilities of new devices – new devices may not provide backward compatibility.
• Supports secure startup – UEFI can check the validity of the operating system to ensure that no malware tampers with the startup process.

Incompatible UEFI cases

• 32-bit Windows operating system – this motherboard supports only Windows 10/ Windows 11 64-bit operating system.
• Older graphics card – the system will detect your graphics card. If you use older graphics cards, it may display a warning message There is no GOP (Graphics Output protocol) support detected in this graphics card.

Important
We recommend that you replace it with a graphics card supporting GOP/UEFI or use CPU with integrated graphics for having normal function.

How to check the BIOS mode?

1. Power on your computer.
2. Press Delete key, when the Press DEL key to enter Setup Menu, F11 to enter Boot Menu message appears on the screen during the boot process.
3. After entering the BIOS, you can check the BIOS Mode at the top of the screen.

BIOS Mode: UEFI
BIOS Setup
The default settings offer the optimal performance for system stability in normal conditions. You should always keep the default settings to avoid possible system damage or failure booting unless you are familiar with BIOS.
⚠ Important

• BIOS items are continuously update for better system performance. Therefore, the description may be slightly different from the latest BIOS and should be for reference only. You could also refer to the HELP information panel for BIOS item description.
• The BIOS screens, options and settings will vary depending on your system.

Entering BIOS Setup
Press Delete key, when the Press DEL key to enter Setup Menu, F11 to enter Boot Menu message appears on the screen during the boot process.
Function key

only).
Ctrl+F:| Enter Search page

• When you press F10, a confirmation window appears and it provides the modification information. Select between Yes or No to confirm your choice.
  BIOS User Guide
  

https://download.msi.com/archive/mnu_exe/mb/Intel700BIOS.pdf

If you’d like to know more instructions on setting up the BIOS, please refer to https://download.msi.com/archive/mnu_exe/mb/Intel700BIOS.pdf or scan the QR code to access.
Important
Functions may vary depending on the product you have.
Resetting BIOS
You might need to restore the default BIOS setting to solve certain problems. There are several ways to reset BIOS:

• Go to BIOS and press F6 to load optimized defaults.
• Short the Clear CMOS jumper on the motherboard.

Important
Be sure the computer is off before clearing CMOS data. Please refer to the Clear CMOS jumper section for resetting BIOS.
Updating BIOS
Updating BIOS with M-FLASH
Before updating:
Please download the latest BIOS file that matches your motherboard model from MSI website. And then save the BIOS file into the USB flash drive.
Updating BIOS:

1. Switch to the target BIOS ROM by Multi-BIOS switch. Please skip this step if your motherboard doesn’t has this switch.

2. Insert the USB flash drive that contains the update file into the USB port.

3. Please refer the following methods to enter flash mode.
   • Reboot and press Ctrl + F5 key during POST and click on Yes to reboot the system.
   Press <Ctrl+F5> to activate M-Flash for BIOS update.
   • Reboot and press Del key during POST to enter BIOS. Click the M-FLASH button and click on Yes to reboot the system.

4. Select a BIOS file to perform the BIOS update process.

5. When prompted click on Yes to start recovering BIOS.

6. After the flashing process is 100% completed, the system will reboot automatically.

Updating the BIOS with MSI Center
Before updating:

• Make sure the LAN driver is already installed and the internet connection is set properly.
• Please close all other application software before updating the BIOS.

To update BIOS:

1. Install and launch MSI Center and go to Support page.
2. Select Live Update and click on Advance button.
3. Select the BIOS file and click on Install button.
4. The installation reminder will appear, then click the Install button on it.
5. The system will automatically restart to update BIOS.
6. After the flashing process is 100% completed, the system will restart automatically.

Regulatory Notices
FCC-B Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This  equipment generates, uses and radiates radio frequency energy, and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  NOTE

• The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

• Shield interface cables and AC power cord, if any, must be used in order to comply with the emission limits.

FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may cause undesired operation.

MSI Computer Corp.
901 Canada Court, City of Industry, CA 91748, USA
(626)913-0828
www.msi.com
CE Conformity
**** Products bearing the CE marking comply with one or more of the following EU Directives as may be applicable:

• RED 2014/53/EU
• Low Voltage Directive 2014/35/EU
• EMC Directive 2014/30/EU
• RoHS Directive 2011/65/EU
• ErP Directive 2009/125/EC

Compliance with these directives is assessed using applicable European Harmonized Standards.
The point of contact for regulatory matters is MSI, MSI-Europe: Eindhoven 5706 5692 ER Son.
Compliance Statement of Innovation, Science and Economic Development Canada (ISED)
CAN ICES-003(B)/NMB-003(B)
Battery Information
European Union:
** Batteries, battery packs, and accumulators should not be disposed of as unsorted household waste. Please use the public collection system to return, recycle, or treat them in compliance with the local regulations.
BSMI:
For better environmental protection, waste batteries should be collected separately for recycling or special disposal.
California, USA:
** The button cell battery may contain perchlorate material and requires special handling when recycled or disposed of in California.
For further information please visit:
http://www.dtsc.ca.gov/hazardouswaste/perchlorate/
CAUTION: There is a risk of explosion, if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer.
Chemical Substances Information
In compliance with chemical substances regulations, such as the EU REACH Regulation (Regulation EC No. 1907/2006 of the European Parliament and the Council), MSI provides the information of chemical substances in products at: https://csr.msi.com/global/index
Environmental Policy

• The product has been designed to enable proper reuse of parts and recycling and should not be thrown away at its end of life.
• Users should contact the local authorized point of collection for recycling and disposing of their end-of-life products.
• Visit the MSI website and locate a nearby distributor for further recycling information.
• Users may also reach us at [email protected] for information regarding proper Disposal, Take-back, Recycling, and Disassembly of MSI products.

WEEE (Waste Electrical and Electronic Equipment) Statement
** To protect the global environment and as an environmentalist, MSI must remind you that…
Under the European Union (“EU”) Directive on Waste Electrical and Electronic Equipment, Directive 2002/96/EC, which takes effect on August 13, 2005, products of “electrical and electronic equipment” cannot be discarded as municipal wastes anymore, and manufacturers of covered electronic equipment will be obligated to take back such products at the end of their useful life. MSI will comply with the product take back requirements at the end of life of MSIbranded products that are sold into the EU. You can return these products to local collection points.
India RoHS
This product complies with the “India E-waste (Management and Handling) Rule 2011” and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01 weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule.
Copyright and Trademarks Notice
Copyright © Micro-Star Int’l Co., Ltd. All rights reserved. The MSI
logo used is a registered trademark of Micro-Star Int’l Co., Ltd. All other marks and names mentioned may be trademarks of their respective owners. No warranty as to accuracy or completeness is expressed or implied. MSI reserves the right to make changes to this document without prior notice. The terms HDMI™, HDMI™ High-Definition Multimedia Interface, HDMI™ Trade dress and the HDMI™ Logos are trademarks or registered trademarks of HDMI™ Licensing Administrator, Inc.
Technical Support**
If a problem arises with your system and no solution can be obtained from the user guide, please contact your place of purchase or local distributor. Alternatively, please try the following help resources for further guidance.

• Visit the MSI website for technical guide, BIOS updates, driver updates, and other information: http://www.msi.com

• Register your product at: http://register.msi.com
  Revision History

• Version 1.0, 2023/05, First release.

References

• MSI - Redirect
• Welcome to MSI Member Account Login | MSI Member Center
• 优酷 - 为好内容全力以赴 - 海量正版高清视频在线观看
• v.youku.com/v_show/id_XNzUyMTI5ODI4.html
• dtsc.ca.gov/hazardouswaste/perchlorate/
• MSI - Redirect
• csr
• csr
• 优酷 - 为好内容全力以赴 - 海量正版高清视频在线观看

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>