Contour Slider Mouse Pro Wired User Manual
- June 13, 2024
- contour
Table of Contents
Contour Slider Mouse Pro Wired
Product Information
The SliderMouse Pro Wired is an ergonomic mouse designed to provide comfort and efficiency during computer use. It comes with a range of features and accessories to enhance user experience.
What’s in the Box?
- SliderMouse Pro
- Wrist rest
- Keyboard risers
- USB charging cable (mounted)
Functions:
- A. Cursor speed
- B. Power switch (no function for wired unit)
- C. Navigation bar
- D. Copy
- E. Paste
- F. Left-click
- G. Right-click
- H. Scroll wheel
- I. Double-click
Connection:
To connect the SliderMouse Pro Wired, simply plug the USB cable into an
available USB port on your computer. Your computer will automatically
recognize and connect the device.
Cursor Speed (DPI):
Press the Cursor speed button (A) to cycle through different cursor speeds.
The LED lights indicate the speed selection, ranging from slow (600 DPI) to
fast (2800 DPI). Hold the Cursor speed button (A) for 8 seconds to reset to
default settings.
Navigation Bar Click Force Adjustment:
To adjust the click force of the navigation bar, press and hold both button
A (Cursor speed) and button F (Left-click) for two seconds. The LED light will
display the current click force
setting. While holding button A, release button F and use button H (scroll
wheel) to change the click force settings. Release button A to select the
desired click force. To disable the navigation bar click function, adjust the
click tension until all LEDs are illuminated.
Navigation Bar Click Volume Adjustment:
The navigation bar offers 6 different click volume settings. To change the
click volume, press and hold button A (Cursor speed) and button G (Right-
click) for two seconds. The LED light will show the current click volume
setting. While continuing to hold button A, release button G and use button H
(Scroll wheel) to adjust the click volume. Release button A to confirm the new
click volume. To disable the navigation bar click volume, adjust the click
volume until all LEDs are illuminated.
Keyboard Risers:
If you are using a keyboard other than Contour’s Balance Keyboard, you can
use the Keyboard risers to achieve the desired keyboard height and angle.
Place the Keyboard risers under your keyboard’s feet as if the keyboard were
lying on the table. For proper ergonomic positioning, the front edge of the
keyboard should be as close to the Navigation bar as possible. Negative tilt
is recommended for a neutral wrist position and decreased finger extension.
Software Driver:
The SliderMouse Pro Wired is plug-and-play, but if you want to customize
its settings, you can download the free driver from contourdesign.com/drivers.
Contact Information:
For more information or support, you can visit Contour Design’s website at
www.contourdesign.com or contact them through
the following details:
- Contour Design Nordic A/S
- Nyropsgade 41-43, 1. floor
- DK-1602 Copenhagen V, Denmark
- Phone: +45 70 27 02 27
- Email: info@contourdesign.com
Contour Design, Inc.
- 10 Industrial Drive
- Windham, New Hampshire 03087, USA
- Phone: 603-893-4556
- Email: ergoinfo@contourdesign.com
The SliderMouse Pro Wired has been tested to comply with FCC and IC standards. Please refer to the user manual for further details and instructions.
What’s in the Box?
- SliderMouse Pro
- Wrist rest
- Keyboard Risers
- USB charging cable (mounted)
User guide
Functions
- A. Cursor speed
- B. Power switch (no function for wired unit)
- C. Navigation bar
- D. Copy
- E. Paste
- F. Left-click
- G. Right-click
- H. Scroll wheel
- I. Double-click
Connection
Connect the USB cable from your SliderMouse into an available USB port on your
computer. Your computer will recognize your new device and connect
automatically.
Cursor Speed (DPI)
Press the Cursor speed (button A) to cycle through cursor speeds. There are
speed selections which range from slow (600 DPI) to fast (2800 DPI). Speed can
be identified by the LED lights as shown. Hold Cursor speed (button A) for 8
seconds to default settings.
Navigation bar click force adjustment
- Click force refers to the level of resistance when clicking the navigation bar. To adjust click force, press and hold both button A (Cursor speed) and button F (Left-click) for two seconds, the LED light will show the current click force setting. While continuing to hold button A, release button F and use button H (scroll wheel) to change click force settings. Release button A to select click force.
- To disable the navigation bar click function, adjust the click tension until all LEDs are illuminated.
Navigation bar click volume adjustment
- The navigation bar has 6 different click volume settings. To change the click volume, press and hold button A (Cursor speed) and button G (Right-click) for two seconds, the LED light will show the current click volume setting. To adjust click volume continue to hold button A and release button G, then move button H (Scroll wheel) up/down to adjust the click volumen. Release button A to confirm.
- To disable the navigation bar click volume, adjust the click volume until alle LEDs are illuminated.
Keyboard risers
- Before using your SliderMouse Pro, please take a moment to adjust your keyboard.
- If you are using other keyboards than Contour’s Balance Keyboard, you can use the Keyboard risers to achieve the desired keyboard height and angle. Simply place the Keyboard risers under your keyboards feet – as the keyboard was lying on the table.
- For a proper ergonomic position the front edge of the the keyboard should be as close to the Navigation bar as possible. We recommend to use negative tilt helping you to hold a neutral wrist position and decreasing the extension of your fingers.
Software driver
All Contour’s ergonomic products are plug-and-play. If you want to customize
your SliderMouse Pro, we recommend to download the free driver available at:
contourdesign.com/drivers
FCC Statement
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
- This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
- These limits are designed to provide reasonable protection against harmful interference in a residential installation.
- This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
- If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
IC Statement
This device complies with Industry Canada’s licence-exempt RSSs. Operation is
subject to the following two conditions:
- This device may not cause interference; and
- This device must accept any interference, including interference that may cause undesired operation of the device.
The term “IC:“ before the certification/registration number only signifies that the Industry Canada technical specifications were met. This product meets the applicable Industry Canada technical specifications.
Warranty
If there is a functional defect due to faulty manufacturing, we will replace the product. This warranty does not cover damage that results from misuse of the product.
Attention!
If you attempt to dismantle your “SliderMouse Pro” you will invalidate your
warranty.
- Contour Design Nordic A/S Nyropsgade 41-43, 1. floor
- DK-1602 Copenhagen V, Denmark Phone: +45 70 27 02 27
- Email: info@contourdesign.com
Contour Design, Inc.
- 10 Industrial Drive
- Windham, New Hampshire 03087, USA Phone: 603-893-4556
- Email: ergoinfo@contourdesign.com
- For more information please visit: www.contourdesign.com
- Tested to comply with FCC and IC standards.
References
- Drivers – Download Software for Contour Design Products
- Contour Design – Ergonomic mice, Superior design
- Contour Design – Ergonomic mice, Superior design