Famileasy Rider 4 Seat Wagon User Manual

Famileasy Rider 4 Seat Wagon

ASSEMBLY AND USE

WARNING

• Do not leave child unattended.
• Read User Manual before operating.
• Always use 5-point safety harnesses properly to avoid injury, or strangulation.
• Remove all children before reconfiguring wagon, adjusting canopy, and when adding or removing components.
• Do not attach weighted items or baggage or wagon not sold by Famileasy.
• This wagon is suitable for children 6mos.
• Maximum recommended height of child 150cm.
• Maximum Load 150kg.
• Parcels or accessory items, or both, placed on the stroller wagon, may cause the stroller wagon to become unstable.
• Do not exceed weight limits. Excessive weight may result in hazardous and unstable conditions.
• Be very careful that no fingers are trapped or injured during folding and unfolding the stroller wagon.
• Do not exceed 1 SOkgs to maintain safe and stable operation.

PARTS

Please make sure you have all of the below parts in your box. Immediately contact Famileasy if any parts are missing.

ASSEMBLY

STEP 1:
Attach rear wheels to brake bar.
Use pull tab as shown for both wheels. When wheel axle is fully inserted, and tab returns to original position, the wheel is properly installed.

STEP 2:
Attach brake bar and wheels to frame next to both rear wheels.
*Make sure the button seen in the second image is completely inserted into the brake bar as seen in the 2nd image.

STEP 3:
Attach front wheels to frame. Use button and ensure it releases fully to ensure proper attachment.

STEP 4:
Unfold Wagon
Undo clip on the strap holding the wagon closed. Open wagon. Put bar at the outside centre of wagon to a vertical position. Fold side flaps out and attach velcro behind flaps. Attach benches using all 6 clips attached to each bench.

STEP 5:
Attach Canopy
Unscrew canopy posts on all 4 corners of the wagon, raise them up to a fully extended position, and then screw them into position turning clockwise. Attach canopy frame to posts diagonally. (2nd image). Then drape canopy over frame, pull tightly over the corners. When in place, attach velcro to posts at all four corners to secure the canopy.

STEP 6:
Attach Basket
At the end of the wagon opposite the brake bar, weave basket hooks into position as shown in the image. Insert cooler bag into basket.

STEP 7:
Inspection
Prior to putting children in the wagon, inspect wheels, brakes, benches, and make sure the exterior centre bar is vertical and firmly in place.

STEP 8:
Adjust handlebars to desired height using buttons located on the interior of the handlebar joint. Engage brake. Load children, and secure 5 point harnesses prior to disengaging brake and setting the wagon in motion. IMPORTANT: Always engage brake when not holding the handle.

FOLDING INSTRUCTIONS

STEP 1:
Remove side bench clips holding the bench seats in place. Unattach side flaps and fold inside wagon.

STEP 2:
Pull tab in the center of the wagon floor upwards to collapse frame.

STEP 3:
Secure buckled straps to keep wagon in folded position.

MAINTENANCE

For cleaning, use a damp cloth, or soft brush and soapy water. Hang dry.
To machine wash, remove only fabric and follow instructions on the label. For best results, machine wash delicate, hang dry, do not machine dry.
After messy conditions, detach wheels and rinse debris until clean. Do not soak wheels. Pat dry immediately.

• Manufacturer Name: lmami Toys (Hebei) Co., Ltd.
• Manufacturer Address: North Of Luozhuang Village, Henantuan, Quzhou Country, Handan City, Hebei Province.
• Contact: craig@famileasy.ca
• Model Name: Famileasy Rider 4 Seat Wagon
• Materials: aluminum alloy frame, Oxford cloth fabric, polyurethane wheels, vegan leather handle
• Production Time: 07 /2023
• Model Number: FWAG_21

WARRANTY

1. We will refund the full purchase price of the returned items minus total shipping charges, restocking fee (if applicable), and the cost of any missing parts.
2. Refunds will only be made in the same form as the original payment within 15 days of the return receipt.
3. Please use a trackable shipping method. If the shipment is lost without a tracking number, the refund will not be processed.
4. Email the tracking number and invoice number to craig@famileasy.ca
   You can always contact us for any return questions at craig@famileasy.ca

Damages and Issues
Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item so that we can promptly resolve the issue.

Exceptions/ Non-Returnable Items
Certain types of items cannot be returned, like Floor Liners, or perishable goods (such as food, swimwear, and undergarments), custom products (such as special orders or personalized items), and personal care goods (such as beauty products). Please get in touch if you have questions or concerns about your specific item. Unfortunately, we cannot accept returns on sale items or gift cards.

Refunds
We will notify you once we have received and inspected your return, and let you know if the refund gets approved, or not. If approved, you will receive a refund that will be applied to your original payment method. Please remember it can take time for your bank or credit card company to process and post the refund.

Warranty
We offer a full replacement warranty on all parts for one year from the date you receive your item(s). Please contact craig@famileasy.ca for assistance.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>