Futaba T4PM PLUS Software Instructions

Futaba T4PM PLUS Software

Product Information

The T4PM PLUS is a software update for the T4PM PULS. It is compatible with various models such as HPS-CT501, HPS-CT702, HPS-CD700, HPS-CB701, and MINI-Z FHSS receiver. The software update adds support to change the SR mode of the compatible models.

The T4PM PLUS version is V1.50 for HPS-CT501, V1.40 for HPS-CT702 and HPS- CD700, V1.30 for HPS-CB701, and V1.20 for MINI-Z FHSS receiver.

Product Usage Instructions

T4PM PLUS Software Update:

1. Refer to the instruction manual of T4PM PULS for the update method.

Changing SR Mode:

* Note: UR mode is not supported. If the servo is set to UR mode, change it to normal mode or SR mode before using it.

1. For HPS-CT501:
   • Ensure that the T4PM PLUS software update is installed.
   • To change the SR mode, follow the instructions provided in the T4PM PULS instruction manual.
2. For HPS-CT702 and HPS-CD700:
   • Ensure that the T4PM PLUS software update is installed.
   • To change the SR mode, follow the instructions provided in the T4PM PULS instruction manual.
3. For HPS-CB701:
   • Ensure that the T4PM PLUS software update is installed.
   • To change the SR mode, follow the instructions provided in the T4PM PULS instruction manual.

MINI-Z FHSS Receiver:

The T4PM PLUS software update also provides additional functions for the MINI-Z FHSS receiver, including Steering force and Gyro functions.

Note: The Steering force and Gyro gain functions are exclusive to the Minute Readyset and cannot be used with the EVO series. For EVO series, use channel 3 and channel 4 for gyro sensitivity adjustment.

Setting Steering force and Gyro gain:

1. On the HOME screen, navigate to MENU-1.

2. In MENU-1, select MINI-Z FHSS(MFHSS) RECEIVER screen.

3. In the RECEIVER screen, navigate to MENU-3 or MENU-4.

4. Push the button to select RECEIVER.

5. For Steering force adjustment:

   • Find the setting item M.ST.F (Steering force) with a range of 0 to 100. The initial value is 62.
   • Use the (+) and (-) buttons to make adjustments.
   • To return to the initial value, press the (+) and (-) buttons simultaneously for approximately 1 second.

6. For Gyro gain adjustment:

   • Find the setting item M.GAIN (Gyro gain) with a range of 0 to
     100. The initial value is 62.

   • Use the (+) and (-) buttons to make adjustments.

   • To return to the initial value, press the (+) and (-) buttons simultaneously for approximately 1 second.

7. After the version upgrade, the steering force and gyro gain settings are set to the initial values (62). Adjust them as necessary.

Using TRIM DIAL function:

The TRIM DIAL function allows you to set the Steering force and Gyro gain adjustment of the MINI-Z FHSS (MFHSS) to digital trims (DT1, DT2, DT3, DT4, DT5) and dial (DL1).

• Use the adjustment buttons (+) and (-) to make adjustments.
• To return to the initial value, press the (+) and (-) buttons simultaneously for approximately 1 second.

Abbreviations:

• M.ST.F: Steering force
• M.GAIN: Gyro gain

Futaba T4PM PLUS Software

Please refer to the instruction manual of T4PM PULS for the update method.

Compatible with HPS-CT501 V1.50

Added support to change the SR mode of HPS-CT501.

• UR mode is not supported. If the servo is set to UR mode, change it to normal mode or SR mode before using it.

Compatible with HPS-CT702/HPS-CD700 V1.40

Added support to change the SR mode of HPS-CT702 and HPS-CD700.

• UR mode is not supported. If the servo is set to UR mode, change it to normal mode or SR mode before using it.

Compatible with HPS-CB701

V1.30

Added support to change the SR mode of HPS-CB701.

• UR mode is not supported. If the servo is set to UR mode, change it to normal mode or SR mode before using it.

Compatible with MINI-Z FHSS receiver “Steering force” and “Gyro” functions

V1.20

When MINI-Z FHSS (MFHSS) is selected in the RX system, the setting items of “Steering force” and “Gyro gain” are displayed on the “RECEIVER” screen

The additional functions “Steering force” and “Gyro gain” are exclusive to the Minute Readyset and cannot be used with the EVO series. Please use channel 3 and channel 4 for the gyro sensitivity adjustment of the EVO series.

Setting item

• M.ST.F: Steering force (0~100: Initial value: 62)
• M.GAIN: Gyro gain (0~100: Initial value: 62)

(Note) Immediately after the version upgrade, the steering force and gyro gain settings are the initial values (62), so please set them as necessary

With the “TRIM DIAL” function, it is now possible to set the “Steering force” and “Gyro gain” adjustment of the MINI-Z FHSS (MFHSS) to digital trims (DT1, DT2, DT3, DT4, DT5) and dial (DL1).

Abbreviation used on setup screen & fanction

• M.ST.F: Steering force
• M.GAIN: Gyro gain

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>