DMX4ALL PixxRangeExtender Optimal Tool User Manual

: June 13, 2024
: DMX4ALL

Table of Contents

DMX4ALL PixxRangeExtender Optimal Tool
Data sheet
Connection
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

DMX4ALL PixxRangeExtender Optimal Tool

Description
The PixxRangeExtender is an optimal tool to bridge longer distances by using digital LED-Stripes. Thereby the signal line turns into a difference sensitive difference level signal so that
the signal transmission range is increased. A transmitter and a receiver are needed. The PixxRangeExtender is a set consisting of both components. By operating with DMX4ALL offered digital Stripes the installation is very simple: In this case plug only the PixxRangeExtender to the digital LED- Stripe.

Data sheet

Power supply: 5V from digital LED-Stripe or external power supply
Connection (Transmitter): 3 pin JST-SM Male 3 pin screw terminal
Connection (Receiver): 3 pin JST-SM Female 3 pin Screw terminal
Length: ca. 10 cm

Delivery

1x PixxRangeExtender (Transmitter) incl. screw terminal
1x PixxRangeExtender (Receiver) incl. screw terminal
1x User manual (german and english)

Connection
Connection between Controller (5V) and digital LED-Stripe PixxRangeExtender (Transmitter) …

Compatible digital LED-Stripes
The PixxRangeExtender is compatible with digital LED-Stripes with only one data line. These are for example:

APA-104
SK6812
WS2811
WS2812(B)
TM1804
TM1812
TM1829
TLS3001
TLS3008
UCS1903
UCS1904
UCS1912
UCS2903
UCS2904
UCS2912

CE-Conformity
This assembly (board) is controlled by a microprocessor and uses high frequency. In order to maintain the properties of the module with regard to CE conformity, installation into a closed metal housing in accordance with the EMC directive 2014/30/EU is necessary.

Disposal
Electronical and electronic products must not be disposed in domestic waste. Dispose the product at the end of its service life in accordance with applicable legal regulations. Information on this can be obtained from your local waste disposal company.

Warning
This device is no toy. Keep out of the reach of children. Parents are liable for consequential damages caused by nonobservance for their children.

PixxRangeExtender
For your own safety, please read this user manual and warnings carefully before installation.

Description

The PixxRangeExtender is an optimal tool to bridge longer distances by using digital LED-Stripes.
Thereby the signal line turns into a difference sensitive difference level signal so that the signal transmission range is increased.
A transmitter and a receiver are needed. The PixxRangeExtender is a set consist both components.
By operating with DMX4ALL offered digital Stripes the installation is very simple: In this case plug only the PixxRangeExtender to the digital LED-Stripe.

Data sheet

Power supply: 5V from digital LED-Stripe or external power supply
Connection (Transmitter):
- 3 pin JST-SM Male
- 3 pin screw terminal
- (Digital LED-Site) (Difference Level Site)
Connection (Receiver):
- 3 pin JST-SM Female
- 3 pin Screw terminal
- (Digital LED-Site) (Difference Level Site)
Length: ca. 10 cm

Delivery

1x PixxRangeExtender (Transmitter) incl. screw terminal
1x PixxRangeExtender (Receiver) incl. screw terminal
1x User manual (german and english)

Connection

Connection between Controller (5V) and digital LED-Stripe
Connection between Controller (more than 5V) and digital LED-Stripe
Connection between two digital LED-Stripes

Only digital LED-Stripes with 5V supply voltage can be used. Mixing different types is not allowed.

Compatible digital LED-Stripes
The PixxRangeExtender is with digital LED-Stripes with only one data line compatible.

These are for example:

APA-104
SK6812
WS2811
WS2812(B)
TM1804
TM1812
TM1829
TLS3001
TLS3008
UCS1903
UCS1904
UCS1912
UCS2903
UCS2904
UCS2912

CE-Conformity

This assembly (board) is controlled by a microprocessor and uses high frequency. In order to maintain the properties of the module with regard to CE conformity, installation into a closed metal housing in accordance with the EMC directive 2014/30/EU is necessary.

Disposal

Electronical and electronic products must not be disposed in domestic waste. Dispose the product at the end of its service life in accordance with applicable legal regulations. Information on this can be obtained from your local waste disposal company.

Warning

This device is no toy. Keep out of the reach of children. Parents are liable for consequential damages caused by nonobservance for their children.

Risk-Notes
You purchased a technical product. Conformable to the best available technology the following risks should not excluded:

Failure risk:
The device can drop out partially or completely at any time without warning. To reduce the probability of a failure a redundant system structure is necessary.
Initiation risk:
For the installation of the board, the board must be connected and adjusted to foreign components according to the device paperwork. This work can only be done by qualified personnel, which read the full device paperwork and understand it.
Operating risk:
The Change or the operation under special conditions of the installed
systems/components could as well as hidden defects cause to breakdown within the running time.
Misusage risk:
Any nonstandard use could cause incalculable risks and is not allowed.
Warning: It is not allowed to use the device in an operation, where the safety of persons depend on this device.

Last changes: 08.06.2022
© Copyright DMX4ALL GmbH

All rights reserve. No part of this manual may be reproduced in any form (photocopy, pressure, microfilm or in another procedure) without written permission or processed, multiplied or spread using electronic systems.
All information contained in this manual was arranged with largest care and after best knowledge. Nevertheless errors are to be excluded not completely. For this reason I see myself compelled to point out that I can take over neither a warranty nor the legal responsibility or any adhesion for consequences, which decrease/go back to incorrect data. This document does not contain assured characteristics. The guidance and the characteristics can be changed at any time and without previous announcement.

DMX4ALL GmbH
WWW.DMX4ALL.DE
Reiterweg 2A D-44869 Bochum
Germany