DMX4ALL 90-0892 3420 Pixx Range Extender 12V User Manual
- June 13, 2024
- DMX4ALL
Table of Contents
- DMX4ALL 90-0892 3420 Pixx Range Extender 12V User Manual
- PixxRangeExtender 12V
- Description
- Contents
- Connection
- Compatible digital LED-Stripes
- CE-Conformity
- Disposal
- Warning
- Risk-Notes
- Failure risk:
- Initiation risk:
- Operating risk:
- Misusage risk:
- © Copyright DMX4ALL GmbH
- Read More About This Manual & Download PDF:
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
DMX4ALL 90-0892 3420 Pixx Range Extender 12V User Manual
PixxRangeExtender 12V
For your own safety, please read this user manual and warnings carefully before installation.
Soldering work may only be carried out by a certified specialist in order to
prevent damage to the product and injury to people.
If acidic or leaded solder, soldering grease or acidic flux etc. has been used
for soldering and/or if the board has been improperly soldered, all warranty
claims will be voided and no repair will be carried out.
Description
The PixxRangeExtender 12V is an optimal tool to bridge longer distances by
using digital LED-Stripes.
Therefore, the PixxRangeExtender 12V is to connect in front to the signal
input of the digital LED-Stripe
Digital LED-Stripes with separated DATA- and CLOCK-Signal as well as digital
LED- Stripes with only one DATA-Signal can be combined with the
PixxRangeExtender 12V.
Data Sheet| |
---|---|---
Power supply:| 12V from digital LED-Stripe
Connection:| 3 pin soldering surface 4 pin soldering surface| (Signal-
Site) (Digital LED-Site)
Dimensions:| 29mm x 12mm|
Contents
1x PixxRangeExtender 12V
1x User manual (german and english)
Connection
Connection between Controller and digital LED-Stripe
For other LED stripe types, the connection is made according to the manufacturer’s instructions.
Connection between two digital LED-Stripes
Compatible digital LED-Stripes
The PixxRangeExtender 12V is compatible with digital LED strips with only one
signal line or separate signal and data line.
These are for example:
– GS8208
– LC8808
CE-Conformity
**** This assembly (board) is controlled by a microprocessor and uses high frequency. In order to maintain the properties of the module with regard to CE conformity, installation into a closed metal housing in accordance with the EMC directive 2014/30/EU is necessary.
Disposal
Electronical and electronic products must not be disposed in domestic waste.
Dispose the product at the end of its service life in accordance with
applicable legal regulations.
Information on this can be obtained from your local waste disposal company.
Warning
This device is no toy. Keep out of the reach of children. Parents are liable for consequential damages caused by nonobservance for their children.
Risk-Notes
**** You purchased a technical product. Conformable to the best available technology the following risks should not excluded:
Failure risk:
The device can drop out partially or completely at any time without warning. To reduce the probability of a failure a redundant system structure is necessary.
Initiation risk:
For the installation of the board, the board must be connected and adjusted to foreign components according to the device paperwork. This work can only be done by qualified personnel, which read the full device paperwork and understand it.
Operating risk:
The Change or the operation under special conditions of the installed systems/components could as well as hidden defects cause to breakdown within the running time.
Misusage risk:
Any nonstandard use could cause incalculable risks and is not allowed.
Warning: It is not allowed to use the device in an operation, where the
safety of persons depend on this device.
Last changes: 08.06.2022
© Copyright DMX4ALL GmbH
All rights reserve. No part of this manual may be reproduced in any form
(photocopy, pressure, microfilm or in another procedure) without written
permission or processed, multiplied or spread using electronic systems.
All information contained in this manual was arranged with largest care and
after best knowledge. Nevertheless errors are to be excluded not completely.
It is pointed out that neither a guarantee nor the legal responsibility or any
liability for consequences which are due to incorrect information is assumed.
This document does not contain assured characteristics. The guidance and the
features may be changed at any time and without previous announcement
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>