ICP DAS PET-AR400 PoE Ethernet High Speed Data Acquisition Module User Guide
- June 12, 2024
- ICP DAS
Table of Contents
ICP DAS PET-AR400 PoE Ethernet High Speed Data Acquisition Module
PET-AR400 Quick Start
Version: v1.0, December 2022
Packing List
In addition to this guide, the package includes the following items:
- PET-AR400
- Screw Driver
Factory Default Settings
The default IP address for the PET-AR400 is as follows:
- IP: 192.168.255.1
- Subnet Mask: 255.255.0.0
- Gateway: 192.168.0.1
Technical Support
Contact our technical support team for assistance:
- Email: [email protected]
- Website: www.icpdas.com
Resources
Learn how to search for drivers, manuals, and spec information on the ICP DAS website:
- For Mobile Web: Model Name
- For Desktop Web: Model Name
Product Usage Instructions
To use the PET-AR400, follow these steps:
- Connect the PET-AR400 to a power source using the providedpower cable.
- Connect the PET-AR400 to a computer or network using an Ethernet cable.
- Ensure that the PET-AR400 is powered on.
- Open a web browser on your computer and enter the default IP address: 192.168.255.1
- You will be prompted to log in with a username and password. Enter the appropriate credentials.
- Once logged in, you can configure the PET-AR400 settings according to your requirements.
Packing List
In addition to this guide, the package includes the following items:
Technical Support
Factory Default Settings
The default IP address for the PET-AR400 are as follows:
- IP: 192.168.255.1
- MASK: 192.168.0.1
- Gateway: 255.255.0.0
Resources
How to search for drivers, manuals and spec information on ICP DAS website.
- For Mobile Web
- For Desktop Web
References
Read User Manual Online (PDF format)
Loading......