WYBOTICS WY450 Robotic Pool Floor Cleaner User Manual

WYBOTICS WY450 Robotic Pool Floor Cleaner

Product Information

• Product Name: WYBOT Robotic Pool Cleaner
• Model: WY450
• Power Supply: Low-voltage DC 28V

Product Usage Instructions

Attention:

1. When putting the cleaner into the swimming pool, make sure the bottom of the cleaner faces the pool wall. Hold the handle and gently put the cleaner into the water. The cleaner will slowly discharge gas, which must be completely discharged to ensure normal operation. Allow the machine to naturally sink to the bottom of the pool.
2. When removing the cleaner from the pool, only hold the handle. Do not pull the cable.

Operating Instructions:
Description of buttons and indicator lights:

• Long press (3 seconds): Start-up/shutdown
• Short press (after startup): Start/stop
• Backlight indication:
  • Standby: Blue, always on
  • Automatic operation: Blue, breathing
  • Manual status: Green, always on
  • Manual operation: Green, breathing
  • Return waterline: Yellow, breathing
  • Fault: Red, flashing

2| Buttons for cleaning mode (all with backlight)|

• Pool cleaning mode
• Pool bottom cleaning mode
• Pool wall cleaning mode
• Combination cleaning mode (operated through APP)
• Waterline cleaning mode (operated through APP)

Backlight indication of buttons: The backlight indicator light
of the corresponding mode is on.

Combination cleaning mode: The combination of backlight
indicator lights of pool bottom cleaning mode button + pool wall
cleaning mode button is on.

Waterline cleaning mode: The combination of the backlight
indicator lights of the whole pool cleaning mode button + the pool
wall cleaning mode button is on.

3| Timing buttons (all with backlight)|

• 1H timing button
• 2H timing button
• 3H timing button

Backlight: The corresponding timing button indicator light is
on.

4| One-key starting function button|

• Long press (3 seconds): Re-connect the network
• Short press: Start automatic cleaning through the button, and
  the cleaning mode and timing are set through APP (functions not set
  during ex-factory).

5| Bluetooth state indicator light|

• Blue, flashing: Bluetooth broadcasting status
• Blue, breathing: Bluetooth connection is successful
• Light off: Bluetooth is closed

6| Wifi state indicator light|

• Green, flashing: The network connection is in progress

Note : The combination cleaning mode and waterline cleaning mode require operation through the accompanying APP.

Important tips

1. When the cleaner is placed on shore or is taken out from the pool, please make sure to turn off the power supply, otherwise it will easily cause serious damage to the cleaner.
2. The power cord of the cleaner must be plugged into the socket with leakage protection device. No one is allowed to enter the swimming pool when the cleaner is working, so as to avoid danger and injury.
3. When putting the cleaner into the swimming pool or take it out from the swimming pool, you must hold the handle. Do not pull the cable. Before starting the cleaner every time, exhaust the gas in the machine as much as possible (there is no bubbles or the machine completely sinks to the bottom of the pool), so as to avoid the gas affecting the normal operation of the cleaner.
4. Before starting the cleaner, the filter screen must be installed, and at the same time, it must be confirmed that the cable is completely relaxed, so as to avoid cable entanglement during work, which will affect the cleaning effect of the cleaner. In serious cases, it may cause damage to the cleaner.
5. Clean the filter box in time after each use of the cleaner, so as not to affect the work of the cleaner due to excessive dirt in the filter box.
6. When the cleaner is not in use, please store the cleaner in a cool and ventilated place indoors. Avoid direct sunlight.
7. When the cleaner is working, the power supply control box should be placed in the shade. Do not place or cover anything on the power supply control box to prevent damage to the internal electrical components due to overheating.
8. Non-professionals shall not disassemble the main machine body of the cleaner and the power supply control box at will, to avoid danger or avoid damage to the cleaner.
9. To prevent accidents, it is recommended that the power supply box should be connected to the fixtures beside the pool with safety ropes before use.
10. It is strictly forbidden to use this machine outsides its operating conditions. Please read this user manual carefully before using the machine.
11. For the cleaning in different seasons, the filter screens with different density can be changed. Please contact the agent to buy filter screen with different density.
12. Ensure that the PH value of the water of the swimming pool is 7.0-7.2.
13. It is forbidden to put water treatment chemicals into the machine, to use the machine for  chemical distributing. If the machine is damaged for this reason, the manufacturer is notresponsible for the warranty

Attention:

1. When putting the cleaner into the swimming pool, the bottom of the cleaner shall face the pool wall, hold the handle and put the cleaner into the water. And the cleaner will slowly discharge the gas (the gas in the cleaner must be completely discharged, otherwise it will affect the normal operation of the machine). Make the machine naturally sinks to the bottom of the pool.
2. When taking out the cleaner from the pool, you only can hold the handle, do not pull the cable.

Brief introduction to product

WY450 is a high-end series product, which integrates the most advanced technology of a swimming pool cleaning robot, including sensor integration, intelligent path planning, self-adaption to swimming pool, super obstacle- surmounting capacity, high-efficiency dirt suction and high-precision filtration, remote control and upgrade functions. It is suitable for large/medium swimming pools. The machine has strong climbing function and can work flexibly in swimming pools made of PVC, ceramic tiles, cement and other materials. The machine is equipped with 3-motor drive system, it can easily solve the problem of line winding. The machine has a secondary filtration system, which can absorb fine dust. The machine is equipped with high- precision gyroscope, infrared and depth sensor, and it adopts multi-sensor integration algorithm. It can provide the optimal path planning according to the shape and size of the swimming pool to achieve efficient and high-quality cleaning effect. The cleaner is powered by low-voltage DC 28V power supply, it has high safety and reliability. Before using this product, please read the manual carefully so that you can use this machine correctly.

Safety:
The power supply control box must be placed in a suitable position to ensure that the cleaner can reach every corner of the swimming pool. At the same time, the position of the power supply control box should not be less than 3.5 meters from the edges of the swimming pool.

Specifications and parameters

1. Input rated voltage: 100~240VAC
   • Frequency: 50Hz/60Hz
   • Output voltage: DC (direct current) 28V
2. Power of the power supply: MAX 200W; Power of the machine: 170W
3. Working time: 1 hour /2 hours /3 hours
4. Working mode: four modes, pool bottom/pool wall/whole pool/waterline
5. Flow rate: about 18m³/
6. Filtration capacity: 180μm(Nylon) + 5μm(HEPA)
7. Creeping speed: about 13m/min
8. Waterproof rating: cleaner IPX8; Power supply box: IP65
9. APP for operation
10. Working environment temperature: 0~+40℃.

Operating instructions

Description of buttons and indicator lights

press it long (3S): start-up/shutdown.

Press it short: (after startup) starting/stop Backlight indication

Standby: blue, always on

Automatic operation: blue, breathing Manual status: green, always on Manual operation: green, breathing Return waterline: yellow, breathing Fault: red, flashing

2| Buttons for cleaning mode (all with backlight)| The functions of the buttons are as follows in turn: whole pool cleaning mode, pool bottom cleaning mode and pool wall cleaning mode; combination cleaning mode and waterline cleaning mode need to be operated through APP; Backlight indication of buttons: the backlight indicator light of the corresponding mode is on, such as whole pool cleaning mode, pool bottom cleaning mode and pool wall cleaning mode;

Combination cleaning mode: the combination of backlight indicator lights of pool bottom cleaning mode button+ pool wall cleaning mode button is on;

Waterline cleaning mode: the combination of the backlight indicator lights of the whole pool cleaning mode button+ the pool wall cleaning mode button is on;

3| Timing buttons (all with backlight)| They are in turn: 1H timing button, 2H timing button and 3H timing button;

Backlight: the corresponding timing button indicator light is on.

4| One-key              starting function button| Press it long (3S): Re- connect the network;

Press it short: start automatic cleaning through the button, and the cleaning mode and timing are set through APP; the functions which are not set during ex-factory;

5| Bluetooth state indicator| Blue, flashing: Bluetooth broadcasting status;
 | light| Blue, breathing: Bluetooth connection is successful; Light off: Bluetooth is closed;
---|---|---
6| Wifi state indicator light| Green, flashing: The network connection is in progress. Yellow, flashing: WiFi is configured, but it is not connected to the router;

Yellow, always on: WiFi is configured and it is connected to the router;

Blue, breathing: successfully connect to the cloud;

7| Delay     startup     status indicator light| Blue, always on: delay startup has been set, and the time has not come;

Blue, breathing: the time for delay startup comes, and automatic cleaning is started (the mode and timing are the last memory mode and timing);

Light off: no delay startup setting;

8| Weekly reservation startup status indicator light| Blue, always on: weekly reservation has been set, and the startup time has not come;

Blue, breathing: the time of weekly reservation for startup comes, and automatic cleaning is started (the mode and timing are the last memory mode and timing);

Red, always on: the calendar is not synchronized, and the weekly reservation setting is invalid;

Light off: no weekly reservation setting;

Through the cloud, you can make separate reservation settings from Monday to Sunday, the time is accurate to o’clock and minutes.

Description of special states:

cycle; maintain
supply| mode        buttons+| the state for 10 minutes, then the machine shuts down and
button| backlight      of     3| the lights go off automatically.
backlight| timing            mode|
blue,| buttons are always|
breathing| on|
Power| backlight      of     3| “Automatic returning waterline” function. The machine
supply| mode        buttons+| automatically runs to the waterline and stops running. And
button| backlight      of     3| the machine automatically shuts down after it is taken out
backlight| timing            mode| from the pool;
yellow,| buttons go off|
breathing|  |
 | The     combination| Fault: water pump motor has overload;
 | of      1H      button|
Power| backlight+    whole|
supply| pool           cleaning|
button| button backlight is|
backlight| on.|
red, flashing|  |
 | The| combination| Fault: left travel motor has overload;
 | of| 2H      button|
 | backlight+ pool bottom cleaning button backlight is on.|
---|---|---
The combination of   3H   button

backlight+ pool wall           cleaning button backlight is on.

| Fault: right traveling motor has overload;
The combination of   2H   button

backlight +3H button backlight+ pool             bottom

cleaning   button

backlight+   wall

cleaning button backlight is on.

| Fault: the machine is taken out from water;
The combination of backlight of 3 timing buttons+ backlight of 3 cleaning mode buttons is on| Fault: the power supply has overload;
Faults can be viewed through APP
Power supply button purple, breathing| The     combination of      1H button backlight+ backlight of whole pool           cleaning button +backlight of     pool     bottom cleaning        button

+backlight of wall cleaning button is on.

| The OTA upgrade of underwater equipment is in progress. Before the upgrade, it is necessary to connect the underwater machine in advance and turn on the power supply for standby
Be irrelevant| The combination of backlight of 3 timing buttons+ backlight of 3 cleaning mode buttons + backlight of one-key starting function button is on| OTA upgrade of power supply is in progress
Green, breathing| Only     the     1H timing button is on| The sensor calibration of underwater machine gyroscope is in progress;
 |  | Prompt: The underwater machine needs to be placed flat on shore, the machine cable is connected to the power supply, and at the same time, press the power supply button+1H timing button for more than 3S, and the buzzer will sound, the machine enters the calibration state. The power supply button has green backlight and gives breathing indication. When the power supply button backlight turns green and is always on, the calibration

ends.

---|---|---
Only     the     2H timing button is on| The depth sensor calibration of underwater machine is in progress;
 | Prompt: The underwater machine needs to be placed flat on shore, the machine cable is connected to the power supply, and at the same time, press the power supply button+2H timing button for more than 3S, and the buzzer will sound, the machine enters the calibration state. The power supply button has green backlight and gives breathing indication. When the power supply button backlight turns green and is always on, the calibration ends.

Clean the filter box and HEPA filter screen
After cleaning is completed, take out the cleaner from the swimming pool, press the button at the tail, the upper cover will automatically bounce off, lift the upper cover, take out the filter box, pour out the sundries inside it and rinse the filter box with water. After the HEPA filter screen is pressed down, it can be ejected obliquely, and then it can be taken out and washed with water

Acquisition of mobile App and connection

1. Download the App:
   • In the case of Android phones, search google play for winnygo, and download it
   • In the case of iPhone, searches the app store for winnygo, download it
2. Turn on the machine, the machine light is blue and always on
3. Connect the APP with the machine within 20s the machine
4. After the connection is successful, the APP will give a “Success” prompt
5. After entering the APP interface, the parameters of the current machine will be displayed, and users can modify the parameters according to their own demands in cleaning
6. After selecting the parameters, click Confirm
7. After restarting, the machine will execute the corresponding cleaning program according to the preset parameters

Note:

1. When using App, it needs to obtain Bluetooth use permission and location permission of the mobile phone
2. App is suitable for ios14 and above, and Android 0 and above.
3. To obtain weather information in APP, you need to turn on Location service

Packing details

S/N| Name| Specificatio ns| Quantity (pieces)| Purpose| Remarks
---|---|---|---|---|---
1| Main machine body of the cleaner| WY450| 1|  | Put it directly in the packing box
2| Power supply| POWER I-170| 1|  |
3| Cable| 18m| 1|  |
4| User Manual|  | 1|  |
5| Quick guide manual|  | 1|  |
6| Certificates of conformity|  | 1|  |

LIMITED WARRANTY

WYBOTICS ROBOT, owned by WYBOTICS CO., LTD, makes products at the best quality we can offer. All WYBOT products have been inspected against defects in materials and workmanship prior to leaving factory. WYBOT is happy to offer warranty for the repair or replacement of pool products for two (2) years on motor and PCB from the date of purchase. The provisions of this Limited Warranty only apply to the original purchaser. Please keep your original sales receipt, as this proof of purchase will be required and must accompany warranty claims to WYBOT or its designated agents. This Limited Warranty does not apply without proof of purchase; or should the purchaser modify or repair the product themselves or by unauthorized people; use non-WYBOT parts or accessories with the product; use the product in contravention of the manufacturer’s instructions; use improper voltage; abuse the product in any way; or through accident or negligence. This Limited Warranty will not cover consequential damages, including claims for normal wear-and-tea or any Act of God outside the control of WYBOT. Non-manufacturing defects, such as grasses that may grow through the ground cloth and/or pool liner are examples of which WYBOT cannot hold responsible for.

IN NO EVENT SHALL WYBOT, ITS AUTHORIZED AGENTS, RELATED ENTITIES, OR EMPLOYEES BE LIABLE TO THE BUYER OR ANY OTHER PARTY FOR DIRECT OR CONSEQUENTIAL DAMAGES. Some states or countries, or other jurisdictions, do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

This Limited Warranty is not extended to close-outs, factory seconds, or resold products (i.e., garage sales, online auctions, or online retailers not purchased directly from WYBOT). Any issue with items purchased from these types of vendors/sellers will need to be addressed through these stores.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>