WYBOTICS Osprey 700 Robotic Pool Cleaner User Manual

WYBOTICS Osprey 700 Robotic Pool Cleaner

Product Information

The Osprey 700 is a robotic pool cleaner that is designed to automatically clean swimming pools. It is cordless and rechargeable, making it easy to use. The cleaner comes with various
accessories, including a charger, retrieving hook, floating blocks, user manual, and quick guide. It has a compact size and is equipped with a powerful motor for efficient cleaning.

Specifications

• Model : Osprey 700
• Rated Working Voltage : 10.8V
• Power : 65W
• Run Time: Max. 110min for one cycle
• Charger Input: 100-240V, 50-60Hz
• Charger Output: 12.6V/3A
• Battery Capacity: 9200mAh
• Charging Time : 3.5-4 Hours
• Pool Size: Suitable for pools up to 180m
• Flow Rate:
• Filter Density:
• Moving Speed: Approx. 36ft/min(11m/min)
• Waterproof Grade: IPX8
• Charging Environment Temperature: 41°F – 95°F (5°C – 35°C)
• Max Water Depth : 8.2ft (2.5m)
• Product Size : 14.6(L)14.1(W)9.4(H) inches / 372(L)360(W)240(H) mm
• Weight: 17.64lbs (8KG)
• Storage Condition: 41°F – 95°F (5°C – 35°C), RH75%

Product Usage Instructions

Important Precautions

1. Please read the manual carefully, and use the cleaner according to the manual. We are not held liable for any loss or injury caused by improper use.
2. Use the accessories recommended or sold by the manufacturer only.
3. Dry the charging port after removing the cleaner out of water and make sure the cleaner is switched off (the indicator is off) if you want to charge the cleaner.
4. Use the original and authorized power charger only, do not charge any other devices with this charger.
5. The power line must be connected to a leakage protected and earthed socket when charging.
6. Do not charge the cleaner if the environment temperature is above 35°C (95°F) or below 5°C (41°F).
7. Do not overcharge the cleaner, which will reduce the battery life.
8. The cleaner should be charged if it needs to be stored for a long time (over 6 months) to maintain battery life.
9. To reduce the risk of electrical shock, do not use the charger if the cord is damaged.
10. Never allow children to ride on it or play with it as a toy.
11. Do not power on the cleaner when it is out of the water.
12. Do not operate the cleaner when there are people in the pool.
13. Always clean and wash the filter tray after use.
14. Only professionals can disassemble the sealed driving kit of the cleaner.
15. Do not operate the cleaner while the pool filter is running.
16. The cleaner should be stored in a cool and ventilated place, away from direct sunshine or any heat source. Never cover it with anything that would cause internal electrical components overheating.

Operations

Power button and indicator

• Press the button, blue light indicates the cleaner is powered
  on.

• Press the button again, red light indicates the cleaner is
  powered off.

Note: When the yellow light is steady on, power off the cleaner and charge it. Running the cleaner in the pool after charging. If it fails to work, please contact after-sales service.

Important Precautions

1. Please read the manual carefully, and use the cleaner according to the manual. We are not held liable for any loss or injury caused by improper use.
2. Use the accessories recommended or sold by the manufacturer only.
3. Dry the charging port after removing the cleaner out of water and make sure the cleaner is switched off (the indicator is off) if you want to charge the cleaner.
4.  Use the original and authorized power charger only, do not charge any other devices with this charger.
5.  The power line must be connected to a leakage protected and earthed socket when charging.
6. Do not charge the cleaner if the environment temperature is above 35℃ (95 ℉ ) or below 5℃ (41 ℉ )
7. Do not over charge the cleaner, which will reduce the battery life.
8. The cleaner should be charged if it needs to be stored for a long time (over 6 months) to maintain battery life.
9. To reduce the risk of electrical shock, do not use the charger if the cord is damaged.
10.  Never allow children to ride on it or play with it as a toy.
11. Do not power on the cleaner when it is out of the water.
12. Do not operate the cleaner when there are people in the pool.
13. Always clean and wash the filter tray after use.
14. Only professionals can disassemble the sealed driving kit of the cleaner.
15. Do not operate the cleaner while pool filter is running.
16. The cleaner should be stored in a cool and ventilated place, away from direct sunshine or any heat source, never cover it with anything that would cause internal electrical components overheating.

Introduction

The robotic pool cleaner Osprey 700 is a new type of rechargeable automatic cleaning equipment for swimming pools, cordless and easy to use.

Packing List

Product Diagram

Specifications

372(L)360(W)240(H) mm

Weight| 17.64lbs (8KG)
Storage Condition| 41 ℉ -95 ℉ (5℃ -35℃ ), RH≤75%

Operations

Power on

/ off

| Press the button, blue light indicates the cleaner is powered on.
Press the button again, red light indicates the cleaner is powered off.
②| Indicator|

1.  Blue light is steady on: power on
2. Blue light flashes: the cleaner is working
3. Yellow light flashes: low battery and start to self-parking
4. Yellow light is steady on: self-parking finished

Note: When the yellow light is steady on, power off the cleaner and charge it. Running the cleaner in the pool after charging. If it fails to work, please contact after-sales service.

Attention

• Put into the pool with the cleaner bottom towards the wall. Hold on the robot and power on the cleaner. The cleaner will start working after 20 seconds when emptying trapped air inside (make sure to empty the inside air in order to make the robot work well), then the cleaner can pool water.
• The cleaner will move to pool edge when finish working, then use the hook to lift it out of the pool.

Filter Cleaning

• Open the top cover: Put the robot aside the pool and open the top cover, the filter basket is located as shown in picture.

• Take out the filter basket
  

• Wash filter basket

• Re-install the filter basket in reverse steps.

Charge the battery

• Remove the cleaner from the pool.
• Make sure the cleaner is powered off (no indicator flashes) and charging port is dry, attach the charger to the charging socket. Red light indicates it is charging. Green light indicates it is fully charged.

LED Indicator
Red – Charging in Progress
Green – Fully Charged
Note: Charge the cleaner indoor and at least 3m (appr. 10ft) from the edge of the pool for charging.

Charger indicator

charging finished
Red light is steady on| The battery is charging
Red light flashes| Low battery or battery is damaged

Installation of Floating Block
Attention: If your robot is performing well, please ignore these instructions.
The following diagrams is limited to use of the floating blocks when the robot cannot climb the pool walls or not able to climb walls like used to.

• Open the filter cover and pick up the filter basket.
  

• Tear off the protective film on the back of the floater and stick one by one according to the position shown in the figure.

• Install the filter basket and close the filter cover.

Pool water condition
Remark: The pool water condition must be within following parameters:

• PH: 7.0-7.4
• Temperature: 50 ℉ -95 ℉ (10℃ -35℃ )
• Salt: Max. 5,000 ppm
• Chlorine: Max. 2 ppm

Warranty

1. This product is covered by WybotTM warranty for 24 months (only for driving kit and control box kit) from the date of purchase. Consumable parts are beyond warranty which include Filter Tray/Brush/ Wheels/Nozzles.
2. This warranty is voided if the product has been altered, misused, or has been repaired by unauthorized personnel’s.
3. The warranty extends only to manufacturing defects and does not cover any damage resulting from mishandling of the product by the owner.
4. The order number or record must be presented for any claim or repair during the warranty period.

Environmental Programmes, WEEE European Directive
Please respect the European Union regulations and help to protect the environment.
Return non-working electrical equipment to a facility appointed by your municipality that properly recycles electrical and electronic equipment. Do not dispose them in unsorted waste bins.
For items containing removable batteries, remove batteries before disposing of the product.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>