Sunlover heating UV Overcover Over Pool Blanket When On Roller Instruction Manual
- June 13, 2024
- sunlover heating
Table of Contents
Sunlover heating UV Overcover Over Pool Blanket When On Roller
Product Information: UV Overcover
The UV Overcover is a protective cover designed to be installed over a pool blanket when it is rolled onto a roller. It helps to extend the life of the blanket by providing additional protection against UV rays.
Contact Information
- Head Office: 62 Parkhurst Dr Knoxfield VIC 3180, Australia
- Phone: 03 9887 2131
- New South Wales: Unit 2, 10 Boden Rd Seven Hills NSW 2147, Australia
- Phone: 02 9838 0000
- Queensland: Unit 4, 8 Reichert Dr Molendinar QLD 4214, Australia
- Phone: 07 5679 6821
- South Australia: Sahara Pools & Solar
- Phone: 0412 204 306
- New Zealand: Oasis Technologies
- Phone: 09 535 8891
UV Overcover Installation Instructions
- Roll the pool blanket onto the roller.
- Place the UV Cover over the blanket.
- If there is a significant amount of excess UV Cover, cut the material slightly longer than the pool blanket, ensuring it protects the full width of the blanket. It is also recommended to leave a 100mm overhang.
- To keep the UV Cover in place, use the three adjustable straps provided to secure the cover over the blanket.
UV Overcover must be installed over pool blanket when on roller!
Failure to do this will shorten the life of the blanket and void warranty.
Roll blanket onto roller and place the UV Cover over the blanket
If there is a great deal of excess UV Cover, cut the material slightly longer
than the pool blanket, ensuring it protects the full width of the blanket. We
also recommend leaving a 100mm overhand. To keep the UV Cover in place, use
the 3x adjustable straps provided to secure the cover over the blanket.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>