ZKTeco SmartAC3-RFID Multibiometric Terminal outdoor Owner’s Manual

ZKTeco SmartAC3-RFID Multibiometric Terminal outdoor Owner’s Manual

Overview

Terminal Block

Standalone Installation

Device Installation

1. Attach the mounting template sticker to the wall, and drill holes according to the mounting paper. Fix the back plate on the wall using wall mounting screws.
   

2. Attach the device to the back plate.

3. Fasten the device to the back plate with a security screw.
   

Ethernet Connection

Connect the device and the system software over an Ethemet cable. An example is shown below:

Default IP address: 192.168.1.201
Subnet mask: 255.255.255.0

IP address: 192.168.1.130
Subnet mask: 255.255.255.0

Click [COMM.] > [Ethernet] > [IP Address] , input the IP address and click [OK].
Note:In LAN, IP addresses of the server (PC) and the device must be in the same network segment when connecting to ZKBioAccess IVS software

Door Sensor, Exit Button, Power & Alarm Connection

Do not Use

• Recommended AC adapter: 12V, 3A
• Toshare the power with other devices, user an AC adapter with higher current ratings.

Lock Relay Connection

The system supports both Normally Opened Lock and Normally Closed Lock The NO Lock (normally opened when powered) is connected with ‘NO1′ and ‘COM’ terminals, and the NC Lock (normally closed when powered) is connected with ‘NC1’and’COM’ terminals. The power can be shared with the lock or can be used separately for the lock, as shown in the example with NC Lock below:

1. Device not sharing power with the lock
   

2. Device sharing power with the lock

Wieg and Reader & Access Controller Connection

RS485 Connection

User Registration

When there is no super administrator set in the device, click on to enter the menu. Add anew user and set User Role to Super Admin, then the system will request for the administrators verification before entering the menu. It s recommended to-register a super administrator initally for security purposes.

Method 1: Registering on the device
Click on > [User Mgt > [New User] to register a new user. The options include entering the user ID and Name, setting User Role, registering a Palm, Face, Card Number, Password and adding Profile Photo.

Method 2: Register on ZKBio Access IVS software

Please set the IP address and cloud service server address in the Comm. Menu option onthedevice.

1. Click [Access] > [Access Device] > [Device] > [Search Device] to search the device onthe software.When an appropriate server address and portis seton the device, the searched devices are displayed automatically
   

2. Click[Add]in operation column, anew window will pop-up. Select con type, Area, and Add to Level from each dropdowns and click [OK] to add the device.

3. Click[Personnel] > [Person] > [New] and fllinallthe required fields to register anewusersinthe software.

4. Click[Access] > [Device] > [Device Control] > [Synchronize All Datato Devices] tosynchronizeall the datasheet device including the new users

Forbore details, please refer to the ZKBio Access IVS User Manual.

Method 3: Register on the phone

Once the ZKBio Access IVS software is installed, the users could enroll their face via a browser application on their own mobile phone.

1. Click [Personnel] > [Parameters), input “http://Server address: Port”in the QR Code UGL bar. The software will automatically generate a QR code. Scan the QR code or login onto *http/Server address: Port/app/v1/adreg” by the mobile phone to register users.
   

2. The users will be displayed in [Personnel] > [Temporary Personnel], click on [Review] option and assign a department and click [OK] to successfully add the user.
   

Ethernet and Cloud Server Settings

Access Control Settings

Click on > [Access Control] to enter the access control management interface and set relevant parameters of access control.

Records Query

Click on > [Attendance Search] > [Event Logs] to enter the records query interface, input the user ID and select the time range, the corresponding event logs will be displayed

Detection Management Settings

Click on > [System] > [Detection Management] to enter the setting interface.

1. You can Enable mask detection function, and enable the Deny access without mask and the Trigger external alarm, the device will send an alarm prompt when the ser doesn’t wear a mask, meanwhile the user will be forbidden to access, as shown in the following figure.
2. When the Allow unregistered people to access is enabled, you can also set Enable capture of unregistered person to save the user photo.
   

Recommended Palm Gestures

• KEEP EFFECTIVE DISTANCE OF 30-50 cm

• KEEP SPACES BETWEEN YOUR FINGERS

• DO NOT KEEP YOUR FINGERS CLOSE

• DO NOT KEEP PALM OUTSIDE COLLECTION AREA

• DO NOT KEEP YOUR FINGERS FOLD/CURLED

Note:

1. Place your palm within 30-50 cm of the device.
2. Place your pam in the palm collection area, such that the palm s placed parallel to the device.
3. Make sure to keep space between your fingers.
4. Please avoid direct sunlight when using the palm function outdoors. According to laboratory test, the palm recognition effect is best when the light intensity is not more than 10,000 lux.

ZKTeco Industrial Park, No. 32, Industrial Road,

TangxiaTown, Dongguan, China.

Phone :+86 769 -82109991
Fax 1 +86755 – 89602394
www.zkteco.com

Copyright ©2021 ZKTECO CO,, LTD. All Rights Reserved.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>