Outwell Parkdale 4PA Air Tent Instructions

: June 12, 2024
: Outwell

Table of Contents

Outwell Parkdale 4PA Air Tent Instructions
PARKDALE 4PA
Cleaning and maintenance tips
Congratulation on your new innovative Outwell® Tent designed and created
Condensation should not be confused with leakage.
Insecticides must not be sprayed in or on the tent as they may damage the
THE OUTWELL TEAM
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Outwell Parkdale 4PA Air Tent Instructions

PARKDALE 4PA

Cleaning and maintenance tips

Congratulation on your new innovative Outwell® Tent designed and created

to accompany you out into the great outdoors.

Select the campsite and position the tent

Open the bag and as you take out the tent look at the way it has been packed. This will help you when you come to repack it.
When selecting your campsite, the ideal place would be an area as even and clean of rocks, branches and other sharp objects as possible.
Spread out the tent and place it with the door in the desired direction, avoid placing the tent directly under trees, and position it with the end into the wind direction, for best results in windy conditions.
Get the most out of your camping trip by having a trial run, putting up and taking down your new tent in order to know it before you use it for the first time.
Under certain weather conditions, condensation can occur on the inside surfaces of your tent. To help prevent this you must remove wet clothes etc., increase ventilation or erect your tent on an Outwell® Footprint.

Condensation should not be confused with leakage.

The flysheet is made of waterproof material. To prevent water from seeping through the flysheet avoid touching the inside surface in rainy weather conditions.
When erecting your tent, do not secure it too tightly, otherwise it will not be able to adapt to varying wind and weather conditions.
If strong winds are expected, replace the normal tent pegs with storm pegs. Do not use guylines to pull out the tent pegs. For stony or hard ground stronger U-form pegs are recommended.

Insecticides must not be sprayed in or on the tent as they may damage the

fabric and coating!

When taking down and packing the tent, it must be completely dry to avoid mildew/rotting. We recommend that after use all metal poles be lightly greased with a nonacidic oil.
Remove dirt from the tent with a soft sponge and pure water. Never wash the tent in a washing machine and never have it dry-cleaned. Store the tent in a dry place.
Even though we have used special waterproof thread for all seams, we recommend that you use a seam sealer or a waterproof spray at regular intervals for all seams around the zips and toggles, these seams are some of the weaker points on your tent as there can be a lot of tension around them.
Please note that the tape may come off after prolonged exposure to the sun. If this happens you can repair your tent by removing loose tape and use a seam sealer and waterproof spray to re- seal seams.
If a minor water leak is found from taping this can easily be re-sealed using a seam sealer – the leak can happen from single thread uncovered by tape a simple fold in the covering tape or similar by human made workflows.
We recommend using Outwell Waterguard on regular intervals on the flysheet material to increase the life span.
Be aware that (UV) ultraviolet rays will damage your tent if you expose it to direct sunlight for longer periods of time. Outtex® fabric used on Outwell® tents increases the lifetime of the tent.
Outwell Product are made for camping use which is normally 2-5 weeks usage a year. They are not designed for permanent usage and should only be used as camping products.
Camping near the sea or lake can further enhance the effect of UV radiation. The same applies to poles and metal parts.
If your tent has a mud valance never use it to adjust the tent or use the mud valance to pull the tent pegs out. The mud valance is one of the weaker points on the tent as it is only designed to keep wind and water out of the living and storage area. Air tents represent the latest technology in family camping and are designed to make pitching fast and easy. Please read and follow these instructions to ensure your tent functions correctly and to optimise its life.

Practice erecting your tent at home prior to use in the field. Follow the sewn-in pitching instructions and/or watch the pitching
When pumping up the tent use the pump gauge to obtain the recommended operational pressure of 7PSI to maximum 9psi / 6 bar.
Air expands and contracts as it warms and As the temperature falls during the night the air tubes will lose some pressure leaving them looking a little slack. This is normal and will disappear in the morning as air in the tubes expands with the rising ambient temperature.
Do not overinflate a cold tent in the morning as there is a risk that the pressure could get too high when it gets hot during the
Learn how your tent behaves under different weather conditions. Squeeze the air tubes inside the tent and feel the pressure. If they seem to get too hard in the midday heat check the pressure by cracking open the inflation valve to release some air and then connect the pump and apply the recommended operational pressure of 7PSI to maximum 9psi / 6 bar.

If you follow the above you will enjoy many happy camping holidays with your tent.
For more info on tips and maintenance please visit outwell.com
Best regards,

THE OUTWELL TEAM

*Quick & Quiet Closure magnets are flexible **so can be bent back into shape if required. We recommend they are laid flat when packing away your tent to prevent damage.

****Patent Pending.