Lyfco DES11T 3200W Premium Electric Scooter User Manual
- June 12, 2024
- Lyfco
Table of Contents
DES11T 3200W Premium Electric Scooter
User Manual
Welcome to use
Thank you for choosing an electric scooter. The electric scooter is a
fashionable transport to entertainment equipment.We suggest you take some time
to read the user manual carefully to understand your car, the more you know,
the more you can enjoy the safety and fun of driving the scooter.
WARNING
PLEASE BE SAFE WHEN RIDING
ALWAYS WEAR A HELMET AND OBEY ALL LAWS!
Note: when using and operating the scooter, please strictly comply with
all relevant local laws and regulations
Products and accessories
Scooter
- user’s Guide
- Legal Notices
- Cue card
Accessories
lease check carefully whether the contents of the
package are complete. If there is any missing or damaged, please contact us
after sales.
Quick start
4.1 Functional diagram
4.2..display
Turn light, headlights, speed, gear position, driving distance and power
consumption will show on the display.
On the display, there are four electric lights indicating electricity.With the
battery power consumption, the power lamp will be changed from top to bottom
according to the order of constant light, flicker, and extinction.When four
lights are normally on, the power is between 100% and 86%; when three lights
are always on, and when one flickers, the power is between 85% and 71%; and so
on, the flashing light will go out with the power consumption.When the bottom
part of the power lamp blinks, the amount of electricity will be depleted.
Please recharge it and use it again. When the electricity is exhausted, all
four electric lights are extinguished, and the vehicle will glide to stop
naturally. 
4.3Body assembly
PACKAGE CONTENTS
Your MACH1 Scooter comes with the following items in the box. please locate
all of the following:
- Electric Scooter
- Battery Charger
- Tool Kit User Manual and Fuses
- Seat
GETTING STARTED
Please read and understand these instructions and the OPERATING PROCEDURES
section ,prior to starting or riding your scooter
- Carefully remove the Scooter from the box
- To unfold the scooter, first of all, pull out the safety bolt with your hands and rotate 45°. Push the straight bar . When you hear a “clink”, you feel the mechanical device lock in place.
- Attach the handlebars by inserting the silver handlebar clamp onto the handlebar post stopping just below the top .Be sure to orient the bars in the correct riding position with the throttle on the rider’s right side .Secure the handlebars to the post by tightening the bolts on the clamp with the enclosed Allen wrench as shown.
- Install the code table, first twist out the screw shown in the figure and take out the decorative cover, then put the speed meter bracket hole corresponding to the hole on the straight pole, install the decorative cover, and twist in the screw.
- As shown in the figure, first push the lock buckle under the seat to the right, straighten the pillar under the seat, loosen the lock buckle, turn the lock buckle, and lock the mechanical device.
- Loosen the seat lock and insert it, as shown in the picture.
- tighten the seat bolts bolts as shown.
4.4. Learning to drive
There is a risk of falling and hurting turn on mains switch or alarming so
please wear a helmet and apparatus to turn on the electric switch protective
gear throughout the game as shown 
The rider puts his right foot on the
deck and his left foot on the ground.Turn the throttle, and when the scooter
moves slowly, stabilize and press the other foot on the deck. 
Your scooter has a variable speed hand throttle .you can control
the speed of your scooter by the amount of pressure you use when rotating the
hand throttle. the more you rotate the faster you will go. To brake,release
the THROTTLE GRIP and depress the brake will disengage power to the left/right
side of the handlebars. Depressing the brake will disengage power to the
motor. When the unit feels like it is loosing power or not accelerating to
full speed, the scooter is ready to be re-charged.
4.5.BRAKING SYSTEM
This scooter adopts oil pressure disc brake system, with oil as the medium,
through the action of the left and right brake handle to move the piston
inside the compressed oil, the pressure from the oil pipe through the caliper,
so as to push the piston inside the caliper and drive the brake pad to hold
the disc, the brake is more powerful and safer.Your scooter has switches on
each brake lever that will disable the engine when the brake lever is pressed
down.Practice braking on a smooth ,dry surface to get used to the feel of the
of the braking system. Braking distance is effected by wet conditions and
loose and uneven riding surfaces. Warning: oil brake is a sealing system, at
the same time through the high-pressure test, absolutely prohibit loosening
the screw on the oil brake, (only change the oil, oil brake can twist out the
screw) any place oil leakage is not allowed, if oil leakage, please stop
riding, and please professional and technical personnel for maintenance.
TIRE PRESSURE
The tire must be inflated to a maximum of 20 PSI. It is also recommended to
use a tube additive like Slime available from any motorcycle shop ,to avoid
inconvenient punctures. Empty the tire of air before removing it.
4.6.MANINTENANCE
RECOMMENDED TOOLS
To adjust and service the scooter you will need the following tools:
Allen Wrenches:3/4/5/6/8/10MM
Wrenches:10/13/17/19/21MM Open end wrench
Philips Head Screwdrivers
4.7.FOLDING &STORAGE
After you finish riding your scooter, you can fold it up for quick storage and
transportation.As shown in the figure, first remove the seat and hold it up
with one hand, then pull out the safety bolt with one hand and rotate it by
45°, hold the handle with both hands, support the ground with the left foot,
step on the folding mechanism with the right foot, feel the folding lock open,
take back the right foot, and gently press the handle until you feel the
machine locked in the downward position.Be careful not to hit your leg with
the handlebars.
4.8.Charger connection**
Open rubber stopper Insert charging head After charging, tighten the rubber
stopper Make sure unit is turned off,
Your scooter comes charged out of the carton. We still recommend charging the
unit for 10-12 hours prior to it’s first use .We also recommend charging
charging your scooter after each use and prior to storage.
WARNING : Do not allow your scooter to go into deep discharge,as this
will damage the batteries.
About charging
IMPORTANT
BATTERY MAINTENANCE and CHARGING INSTRUCTIONS
- you MUST charge completely prior to initial use. (Follow charging instructions in your Product Handbook)
- Charge immediately after each use.
- Charge before storage.You must charge every 30 days if not in use.
- Charge the unit for 10-12 hours or until the light on the charger turns red&green.
- DO NOT allow this unit to deep discharge the battery.
- For safety purposes.DO NOT charge the battery for over 24 hours.
- Turn the unit OFF when not in use.
Failure to follow these INSTRUCTIONS will VOID YOUR WARRANTY!
This PRODUCT IS NOT INTENDED FOR EXTREME or OFF-ROAD Use!Please take care of
your scooter!
DO NOT JUMP or ABUSE THIS PRODUCT!
DO NOT RIDE IN WET/ICY CONDITIONS!
Failure to follow these instructions will
VOID YOUR WARRANTY!
6.Safety instructions
IMPORTANT
PLEASE READ THIS BEFORE USING THIS PRODUCT READ THIS THIS FIRST!
WARNING
-
This product does not conform Motor Vehicle Standards and is not intended for operation on public streets,roads or highways. Serious injury can result from the unsafe operations of this product.Operator can minimize these risks by using certain safety equipment such as:safety helmet ,goggles,gloves,elbow and knee-pads and appropriate footwear.
-
Electric scooter is a kind of sports entertainment tool, not a vehicle,But once you drive it into a public area, it will also have vehicle properties, so there are also security risks that may exist in all vehicles.Driving in strict accordance with the instructions in this manual will protect you and others from the greatest extent possible, and ensure compliance with national and provincial and municipal traffic regulations and traffic regulations.
-
At the same time, you need to understand that once you drive your electric scooter to other public places on public roads, even if you follow this safe driving guide, you may be exposed to the risk of illegal driving/inappropriate operation by others or vehicles.Just like walking or cycling, you may receive the same damage from other vehicles; like all vehicles, the faster you drive an electric scooter, the longer the brakes require, and the emergency braking on some smooth ground may cause the wheels to slip. And lost balance and even fell. It is therefore important to be vigilant during driving, maintain proper speed, and maintain a reasonable safety record with other people and vehicles.Be alert and drive at low speed before driving into unfamiliar terrainPlease respect the right of the pedestrian before driving. Avoid scaring pedestrians, especially children. When passing behind the pedestrian, remind the pedestrian and slow down when passing.Pass as far as possible from the left side of the pedestrian (for areas where the vehicle is driving to the right). Keep face to face and keep speed on the right side
-
When driving in countries and regions such as China that do not currently have national standards and regulations for electric scooters, please strictly observe the safety requirements of this manual for drivers. The company will not bear any direct liability and joint liability for all financial, personal, accident, legal disputes and other adverse events that result in conflicts of interest caused by the use of the instructions in this manual.
-
DO NOT operate this product in traffic,on wet,frozen,oily or unpaved surfaces,potholes,surface cracks and obstacles.
DO NOT use a water hose to clean this product .See Product Handbook for more information. Do not lend an electric scooter to someone who does not operate to avoid injury. Give the electric scooter to a friend, be sure to be responsible for the safety of your friend, teach him or her, and inform him or her that you must wear safety gear. -
persons without excellent vision .balance,coordination,reflex,muscle and bone strength and good decision-making capabilities should not use this product.
-
Minors without adult supervision should not use this product.Persons unwilling or unable to take responsibility for their own actions should not use this product.
-
This product is ELECTRIC! DO NOT ride this product in wet conditions, Puddles or rainy weather.
-
Please perform basic inspections on the electric scooter before each driving. If you notice obvious loose parts, poor battery life, slow tire leakage or excessive wear, abnormal noise or malfunction, please stop using it immediately. Do not force it.
QUICK REFERENCE SAFETY GUIDE
SAFETY GUIDE
- The recommended minimum age for riding this scooter is18 years old.
- To avoid damage to the motor and footplate, do not overload the scooter.
- Never ride with more than one person.
- Inspect your scooter thoroughly before each use for loose or missing parts.
- Avoid unintentional starts by turning the scooter off while not in use.
- To avoid the risk of a short circuit in the electrical parts,do not use your Electric scooter in the rain and never spray or wash off your scooter with water.
- Do not place the battery near fire or heat.
- To avoid damage to the battery,do not use the charger if it has been damaged in any way.
- Keep hands , face feet and hair away from all moving parts.
- Do not touch the motor or wheels white they are rotating.
- Braking are designed to control speed as well as stop the scooter. Practice braking for proper slowing down and smooth stops.
- Maintain your scooter as recommended in this Product Handbook.
- Use only quality replacement parts as recommended by the manufacturer.
- Inspect the entire scooter prior to each use. Replace any part that is cracked,chipped or damaged before use.
NEVER ALLOW CHILDREN TO OPERATE THE SCOOTER
NEVER ATTEMPT TO OPERATE THE SCOOTER WHILE UNDER THE INFLUENCE OF ALCOHOL.
If a situation arises that is not covered in the manual,
Proceed with caution and use good judgment.
Daily maintenance and maintenance
Cleaning and storage of electric scooters
If there is stain on the surface of the electric scooter body, use a soft
cloth to wipe a small amount of water to wipe;If stains that are difficult to
clean are present, use toothpaste and brush repeatedly with a toothbrush. Then
clean with a damp cloth. If the plastic parts of the body are scratched, they
can be sanded with other abrasive materials.
Tip: Do not use alcohol, gasoline, kerosene or other corrosive, volatile
chemical solvents to clean, otherwise it will seriously damage the appearance
and internal structure of the car body. do not use your Electric scooter in
the rain and never spray or wash off your scooter with water.Otherwise, it may
cause electric shock or serious failure due to internal water inflow.
When not in use, try to store the electric scooter in a dry and cool place
indoors, and try to avoid storing it for a long time outdoors.Sunlight
exposure/overheating/cold outdoor environment will accelerate the appearance
of electric scooters and the aging of tires and reduce the service life of
electric scooters and their battery packs.
Maintenance of electric scooter battery
- Do not use battery packs of other models or brands, otherwise there may be a safety risk
- Do not touch the battery contacts and do not disassemble or puncture the case. Avoid metal objects touching the battery contacts causing a short circuit. Failure to do so may result in damage to the battery or death.
- Can only be charged with the original charger, otherwise there is danger of damage or fire
- Improper disposal of used batteries can seriously pollute the environment. Observe local regulations when disposing of this battery pack.Do not discard this battery pack at will to protect the natural environment.
- Please fully charge the battery after each use, which will help extend battery life.
Do not place the battery in a high temperature above 50 ° C or in a low
temperature below -20 ° C (for example, do not put the electric scooter or its
battery pack in a car under the summer sun), do not put the battery into the
fire Otherwise, it may cause battery failure, overheating, and even the risk
of fire. If it is not used for more than 30 days, please fully charge it,
store it in a cool dry place, and fully charge it once in 60 days. Otherwise,
the battery may be damaged and the damage is not covered by the warranty.
Avoid completely exhausting the battery and recharging it. Try to use it as
much as possible. This will greatly extend the battery life. In addition, when
used at room temperature, the battery pack can achieve higher cruising range
and performance; and if used in an environment below 0 °C, battery life and
performance will decrease.Typically, at -20 ° C, the cruising range may be
only half or less at normal temperature. After a steady rise, the battery’s
cruising range will recover.
Tip: A fully charged electric scooter that drains its stored power after
about 120-180 days of standby. There is a smart chip inside the battery to
record the charge and discharge of the battery. If it is damaged by a long
time without charging, it will no longer be able to be charged. If it is not
charged in time, it may cause the battery to be over-discharged and damaged.
This damage is unrecoverable. And can not enjoy the free warranty.
Cleaning and storage of electric scooters
If there is stain on the surface of the electric scooter body, use a soft
cloth to wipe a small amount of water to wipe;If stains that are difficult to
clean are present, use toothpaste and brush repeatedly with a toothbrush. Then
clean with a damp cloth. If the plastic parts of the body are scratched, they
can be sanded with other abrasive materials.
Maintenance of electric scooter battery
- Do not use battery packs of other models or brands, otherwise there may be a safety risk
- Do not touch the battery contacts and do not disassemble or puncture the case. Avoid metal objects touching the battery contacts causing a short circuit. Failure to do so may result in damage to the battery or death.
- Can only be charged with the original charger, otherwise there is danger of damage or fire
- Improper disposal of used batteries can seriously pollute the environment. Observe local regulations when disposing of this battery pack.Do not discard this battery pack at will to protect the natural environment.
- Please fully charge the battery after each use, which will help extend battery life.
Do not place the battery in a high temperature above 50 ° C or in a low
temperature below -20 ° C (for example, do not put the electric scooter or its
battery pack in a car under the summer sun), do not put the battery into the
fire Otherwise, it may cause battery failure, overheating, and even the risk
of fire. If it is not used for more than 30 days, please fully charge it,
store it in a cool dry place, and fully charge it once in 60 days. Otherwise,
the battery may be damaged and the damage is not covered by the warranty.
Avoid completely exhausting the battery and recharging it. Try to use it as
much as possible. This will greatly extend the battery life. In addition, when
used at room temperature, the battery pack can achieve higher cruising range
and performance; and if used in an environment below 0 °C, battery life and
performance will decrease.Typically, at -20 ° C, the cruising range may be
only half or less at normal temperature. After a steady rise, the battery’s
cruising range will recover. If the front and rear tires of your electric
scooter are out of gas, please use the extended inflation nozzle attached to
the car to connect the body tires to the air.First unscrew the front and rear
tire inflation caps, then tighten with the extension inflation nozzle and the
tire inflation nozzle, and then connect the pump to inflate after tightening.
Model parameter table
| Performance | project | Standard edition | Tall edition |
|---|---|---|---|
| Product Size | Length width height (cm) | 13005601280 mm | |
| After folding, length width height (cm) | 1320560600 mm | ||
| weight | Scooter weight(kg) | About 45 | About 57 |
| Cycling requirements | Maximum load(kg) | 120 | |
| Age of use | 18-50 | ||
| Use height(cm) | 120-200 | ||
| Main vehicle parameters | Maximum speed(km/h) | About 70 | |
| Typical life(km) | About 50 | About 60 | |
| Maximum grade(%) | About 40 | About50 | |
| Use terrain | Hardened road surface, flat dirt road surface, no more than 1cm |
step, no more than 3cm channel
Operating temperature (℃）| -10-40
Storage temperature (℃)| -20-45
Protection level| IP54
Battery pack parameters| Rated voltage（VDC）| 60V=
Maximum charging voltage（VDC）| 67.2V=
Rated Capacity（AH）| 20
Intelligent battery management system| Overvoltage/Undervoltage/Short/ Auto
Sleep
Motor parameter| rated power(W)| 500| 700
Maximum power(W)| 800| 1000
Charger parameters| rated power(W)| 134
| Rated input voltage(VAC)| 100-240V
Rated output voltage(VDC)| 67.2V
Rated current(A)| 2
Certificate| CCC, CE,ROHS
Charge time (h)| About 10| About 12
- Body height: the distance from the ground to the highest end of the body
- Typical battery life: under full power, 75kg load, ambient temperature 25°C, measured at 35km/h at a constant speed on a flat road surface
Note: Data and parameters vary by model. Subject to change without notice
The name and content of harmful substances in the product
| Part Name | Harmful Substance |
|---|---|
| Lead (pb) | HG |
(cr(vI))
| Polybromi nated biphenyl (PBB)| Polybrominated biphenyl (PBDE)
Charge| ×| Ｏ| Ｏ| Ｏ| Ｏ| Ｏ
Battery| ×| Ｏ| Ｏ| Ｏ| Ｏ| Ｏ
Gas nozzle| ×| Ｏ| Ｏ| Ｏ| Ｏ| Ｏ
Charge port| ×| Ｏ| Ｏ| Ｏ| Ｏ| Ｏ
Light| ×| Ｏ| Ｏ| ×| ×| ×
Instrument
board
| ×| Ｏ| Ｏ| ×| ×| ×
Hub motor| ×| Ｏ| Ｏ| ×| Ｏ| Ｏ
shell| Ｏ| Ｏ| Ｏ| Ｏ| Ｏ| Ｏ
Common failure list
| SYMPTONS | POTENTIAL CAUSE | SOLUTION |
|---|---|---|
| Connect charger green light | 1. This indicates the batteries are adequately |
charged.
2. Bad fuse or open connection between charger socket and batteries.| 1.
Check whether the charger is connected to AC.
2. Check Fuse: Look FOR Loose or disconnected wire
Batteries do not hold a charge,Unit does not have specified travel range| 1.
Batteries have reached the end of their useful life.
2. Charger is malfunctioning.| 1.Replace Batteries 2.Replace charger unit
Unit moves intermittently or very slow.| 1. Batteries not fully charged.
2. Loose Wire.
3. Bad Throttle or controller| 1. Charge or replace batteries.
2. Check for loose wires
3. Replace Throttle or controller
Unit will not move when throttle lever is activated.| 1. Batteries not
fully charged.
2. Brake switches out of adjustment| 1. Replace batteries or charger.
2. loosen brakes
3.Replace batteries
Unit stops abruptly during use.| 1. Fuse Blown
2. Loose or broken wire.
3. Bad controller| 1. Replace Fuse
2. Check for loose or broken wires and repair/replace.
3. Replace Throttle or controller
Turn on the power switch the whole machine is not powered up, remote control
can open the power| 1. Bad Switch
2. Wire disconnect| 1. Replace Switch
2. Check for loose or broken wires and repair/replace.
Konsumentkontakt
Arc E-commerce AB
Box 3124
13603 Haninge
Sverige