Schneider Electric Altivar Process ATV600/900 Variable Speed Drive Instructions
- June 12, 2024
- Schneider Electric
Table of Contents
Schneider Electric Altivar Process ATV600/900 Variable Speed Drive
Product Information
- Product Name: VARIABLE SPEED DRIVE ATV650 IP55 90KW 400/480V DISCONNECT SWITCH
- Brand: Schneider Electric
- Manufacturer: Schneider Electric Industries SAS
- Representative Product: ATV650D90N4E
- Product Function: The main function of the Altivar Process product range is the speed control and variation of a synchronous, asynchronous or reluctance electric motor for fluid management and industrial applications.
- Description of the Range: This range consists of products Altivar 650 and Altivar 950 with ratings from 55 to 90 kW for operation on 400V/480V, 3-phase supplies IP55.
- Total Representative Product Mass: 87000 g
- Representative Product Dimensions: 1250 mm x 345 mm x 436 mm
Product Usage Instructions
The VARIABLE SPEED DRIVE ATV650 IP55 90KW 400/480V DISCONNECT SWITCH is designed for speed control and variation of electric motors in fluid management and industrial applications.
Follow these instructions for proper usage:
- Ensure that the product is installed in accordance with the manufacturer’s guidelines and local electrical codes.
- Connect the appropriate power supply to the disconnect switch.
- Connect the motor to the variable speed drive using the provided cables.
- Configure the speed control settings according to your specific application requirements.
- Test the operation of the motor by gradually adjusting the speed using the control interface.
- Monitor the motor performance and make any necessary adjustments to optimize its operation.
- Regularly inspect and maintain the product to ensure its continued performance and safety.
- If the product reaches its end of life, it should be disposed of according to the legislation of your country.
- Refer to the product’s end of life instructions for proper disposal guidance.
If you encounter any issues or have questions about the product usage, please
refer to the manufacturer’s website or contact their customer care center for
assistance.
Note: No accessories are needed for the usage of this product.
Additional information
Legal information| This product family is in the scope of European Union
directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE). The
product family must be disposed according to the legislation of the country.
This document is intended for use by end of life recyclers or treatment
facilities. It provides the basic information to assure an appropriate end of
life treatment for the components and materials of the product.
---|---
Purpose| This document is intended for use by professional end of life
recyclers or waste treatment facilities. It provides the basic information for
proper end-of-life treatment of product components and materials.
In case of special transportation: transportation method| No special
tranportation.
Recyclability potential| 84%| Based on “ECO’DEEE recyclability
and recoverability calculation method” (version V1, 20 Sep. 2008 presented to
the French Agency for Environment and Energy Management: ADEME).
Potential disassembly risks
- The information provided in this document assumes that the product is completely de- energized and uninstalled (refer to the instructions provided in the appropriate product manuals).
- Dismantling/disassembling the product may entail hazards caused by, for example, sharp edges, chemical aggression or ejected parts.
WARNING HAZARD DUE TO INSUFFICIENT PROTECTION
- Implement all safety measures required by the applicable regulations and by the processes used to dismantle/disassemble and dispose of the product
- Use all necessary personal protective equipment such as gloves and goggles. Failure to follow these instructions can result in death or serious injury.
End of Life Instructions
Recommendation| Number on drawing| Component / Material|
Weight(in g)| Comment
---|---|---|---|---
To be depolluted| 1| Electronic Board (Power and Communication) > 10cm²| 4996|
To be depolluted| 2| LCD and all those back-lighted with gas discharge lamps|
25|
To be depolluted| 3| Other battery| 2,9| Lithium content: 0,07 g
To be depolluted| 4| Cable (high current)| 1449|
To be depolluted| 5| Electrolyte capacitors which size: height > 25 mm,
diameter > 25 mm or proportionately similar volume| 3240|
To be dismantled| 6| Steel| 53497| Housing, Front door, Cover, Ground plate,
Support, Bar
To be dismantled| 7| Aluminium| 10984| Heatsink, Bar
To be dismantled| 8| PC, ABS-PC, PA, PA6, HDPE, SAN with or without additive,
PP+EPDM and PP| 1002| Housing, Chassis, Front cover
To be dismantled| 9| Copper| 1229| Bar
Other| | | 10575,1|
Product description
| Manufacturer identification | Schneider Electric Industries SAS |
|---|---|
| Brand name | Schneider Electric |
| Representative product | VARIABLE SPEED DRIVE ATV650 IP55 90KW |
400/480V DISCONNECT SWITCH – ATV650D90N4E
Product function| The main function of the Altivar Process product range
is the speed control and variation of a synchronous, asynchronous or
reluctance electric motor for fluid management and industrial applications.
Description of the range| This range consists of products Altivar 650
and Altivar 950 with ratings from 55 to 90 kW for operation on 400V/480V,
3-phase supplies IP55.
Total representative product mass| 87000 g
Representative product dimensions| 1250 mm x 345 mm x 436 mm
Accessories| No accessories needed.
Date of information release| 11/2021
Schneider Electric Industries SAS
- Country Customer Care Center
- http://www.schneider-electric.com/contact
- 35 rue Joseph Monier
- CS 30323
- FR 92500 Rueil Malmaison
- RCS Nanterre 954 503 439
- Capital social 896 313 776 €
- www.schneider-electric.com
- ENVEOLI1506002_V2
Published by Schneider Electric
© 2021 – Schneider Electric – All rights reserved