DCU 34157015 Smartwatch Elegance User Manual

DCU 34157015 Smartwatch Elegance

Product Information: Smartwatch Elegance

The Smartwatch Elegance is a versatile device that can be used with both IOS and Android platforms. It has a model number of 34157015 or 34157016 and supports Bluetooth 5.0 connectivity. The device can be charged with a magnetic charging cable and has a battery that should not be exposed to extreme temperatures. The product is rated IP68 waterproof which makes it suitable for daily use, but not for use with saltwater or hot showers/baths/saunas.

Product Usage Instructions

1. Ensure that your device meets the product requirements of iOS 9.0 and above; Android 4.4 and above, compatible with Bluetooth 5.0.
2. Download the Smartwatch App by scanning the QR code or searching for the name of the APP Da Fit in your APP Store or Play Store.
3. Open the App and set up your profile.
4. Charge the device with the magnetic charging cable, being careful not to connect the 2 pins of the cable with conductive material at the same time.
5. To connect the device to your phone, go to [Dispositivos] and click on [Enlazar dispositivos]. Choose your device from the list of scanned devices.
6. Control the device using the Control Center by swiping up, down, right, left, or pressing the key.
7. Use the Sleep feature to track your sleep patterns by wearing the Smartwatch while you sleep.
8. Monitor your heart rate daily by tapping on the heart rate interface.
9. Track your steps throughout the day with the automatic Steps feature.
10. Choose from 8 sport modes including walking, running, cycling, basketball, football, badminton, skipping rope, and swimming pool (do not use in saltwater) using the Training feature.
11. Measure your blood pressure by tapping on the blood pressure page.
12. Remember that Sleep stats reset to zero at 8:00 pm, movement stats reset to zero at midnight, and all features are beyond the scope of the warranty if used with saltwater or when exposed to hot water or steam.

Smartwatch Elegance
IOS – ANDROID
34157015 / 34157016

Thank you very much for purchasing this watch, the DCU team has been working hard to offer you a comfortable, beautiful and functional watch.
If you have any questions that this manual cannot solve, we will be happy to assist you, you can write to [email protected] and in less than 24 hours we will answer you.
We wish you enjoy it!
If you want to know a little more, go to www.dcutec.com

Device maintenance

Remember the following tips to keep your Smartwatch in good condition:

• Clean the watch regularly, especially the back side, and keep it dry.
• Adjust the watch strap to ensure the air circulation.
• Skin care products should not be used on the wrist with the smartwatch.
• Please stop wearing the watch in case of skin allergy or any discomfort.

www.dcutec.com

DOWNLOAD THE SMARTWATCH APP: Scan the QR code to download and install the APP, or search in your APP Store or Play Store the name of the APP “Da Fit”.
Device requirements: iOS 9.0 and above; Android 4.4 and above, compatible with Bluetooth 5.0.

CHARGE AND ACTIVATE THE SMARTWATCH

Before using the watch for the first time, you need to fully charge the battery, use the magnetic charging cable provided to connect the metal charging contacts on the back of the watch, connect the other end of the charging cable to an USB charger or an USB computer interface that provides a minimum of 5V/1A and a maximum of 5V/2A.
The estimated time for a full charge is between 2-3 hours. To extend battery life, never let it discharge to 100% and charge it regularly, even if you are not going to use it.

Caution: Don’t connect the 2 pins of the magnetic charging cable with conductive material at the same time, it may cause a short circuit
The battery of smartwatch can be damaged or discharged very quickly at very low or very high temperatures.

BLUETOOTH CONNECTION WITH THE APP

The MAC address on the “Setting”-”About” page could help you to identify your device on the scanning list.
After successfully pairing the smartwatch, every time that you will open the App in the future, the smartwatch watch will automatical-ly connect to the phone and the data can be synced by swiping up and down from the main page in the App.

Remark: The product supports waterproof with IP68 level, it is available to wear it while wash hands, 30min swimming pool, in raining, etc.
Do not use it with saltwater or when have a hot shower/bath or sauna, the vapors will get into the host, scratch damage of peripheral components. All these are beyond the scope of the warranty.

CONTROL PANEL

SMARTWATCH FEATURES

• Sleep:
  If you keep wearing Smartwatch in your sleep, it can provide the hours slept and quality of sleep stats on both the screen and the APP.
  NOTE: Sleep stats reset to zero at 8:00 pm.

• Heart Rate Test:
  The Smartwatch could record your heart rate daily.
  You also could tap on the heart rate interface to start measuring the current heart rate.

• Steps:
  Smartwatch automatically records the steps during the day.
  NOTE: Your movement stats reset to zero at midnight.

• Training:
  Tap the training icon on the menu to start a new training measure recording, there are 8 sport modes to be chosen: walking, running, cycling, basketball, football, badminton, skipping rope and swimming pool (do not use in saltwater). The last training recording will be showed on the training interface.

• Blood pressure test:
  Tap on the blood pressure page to start measuring your blood pressure.
  On the blood pressure page, it can show the blood pressure measured data of the last times.

• SpO2 Test:
  Tap the SpO2 interface to start measuring your SpO2.
  On the SpO2 interface, it can show the SpO2 measured data of the last times.

• Weather:
  The weather page shows the current weather and the information for the next day. Weather information must be connected to the DaFit APP before data can be obtained. The weather information cannot be updated if it is disconnected from the APP for a long time.

• Messages reminder:
  The device can sync incoming notifications from Twitter, Facebook, Whatsapp, Instagram etc.
  Recently 5 messages can be stored. Note: You can switch off/on the incoming notification in the APP DaFit.

• Remote shutter:
  After connecting the device, you can remotely control your phone’s camera.

• Player shutter:
  After connecting the device, you can remotely control the music player on your phone.

• Alarms:
  Set up the alarm on the APP, the device will vibrate to remind on time.

• Theater Mode:
  The device will turn off the vibration and turn down the brightness when the theater mode is turned on.
  Note: You can turn on/off the theater mode in the control center.

• Remind to Drink:
  The smartwatch will remind you “Time to Drink Some Water” at the planned drinking time.
  Note: You can set the feature in the APP DaFit.

• Remind to Move:
  The device will vibrate to remind you to make a relax after 1 hour sitting.
  Note: You can switch on/off the feature in the APP DaFit.

FREQUENTLY ASKED QUESTIONS AND ANSWERS

Why do the blood pressure values deviate from the blood pressure monitor?
The deviation between the watch and the blood pressure monitor measurements is due to several factors. The blood pressure monitor measures the brachial artery and the watch measures the two main branches of the microartery; Under normal circumstanc-es, the difference between the aortic blood pressure measurement and the microartery blood pressure measurement will be thirty to forty; If you use a watch and a blood pressure monitor to take measurements at the same time, as the blood flows through the arteries in a centrifugal direction, the strap puts pressure on the area below the middle of the elbow when the blood pressure monitor is measuring, preventing Temporarily allowing blood to flow smoothly into the arterial branches below; increased blood pressure will deviate the upper and lower blood pressure measurements even more.

Why can’t the watch be worn in a hot shower?
The temperature of the bath water is relatively high, which will produce a large amount of water vapor, and the water vapor is in the gas phase, its molecular radius is small, easy to filter through the gap of the watch case, when the temperature drops and will condense into liquid phase water droplets, easy to cause the watch’s internal circuit short circuit, damage the watch’s circuit board, and then damage the watch.

Why is my smartwatch not receiving notifications?

1. Confirm that you have given all the necessary permissions to the DaFit APP to read the notifications and that the APP is running in the background.
2. Confirm that the messages are displayed normally in the notification bar of the phone. Watch message notifications are done by reading the message from the phone’s notification bar; If there is no message in the notification bar of the phone, the watch will not receive it.
3. Confirm that you have enabled notifications in the DaFit watch APP settings.

OTHER FEATURES:
Other smartwatch functions include stopwatch, alarm, timer, brightness adjustment, vibration on/off, do not disturb mode, movie mode, factory reset, power off and smartwatch information.

CHANGE THE MAIN SCREEN STYLE:
Hold down the main screen, swipe from left to right to change the dial, click confirm.
You can find more designs available in the DaFit APP.

PAY SPECIAL ATTENTION TO THESE TIPS:

1. Avoid the watch being subjected to strong impacts, extreme heat and/or sun exposure.
2. Do not disassemble, repair or modify the watch yourself.
3. This device uses 5V 500mA for charging. It is strictly forbidden to use a power supply with a load greater than 5V.
4. The operating environment of this device is 0 ° ~ 45 °. Keep it away from extreme heat sources.
5. When the watch is wet, wipe it dry with a soft cloth before charging, otherwise it will corrode the charging contacts and cause charging failure.
6. Do not touch chemicals such as gasoline, cleaning solvents, propanol, alcohol, or insect repellent.
7. Do not use this device in high voltage and high magnetism environment.
8. If you have sensitive skin or wear the watch too tight, it may feel uncomfortable.
9. Wipe the sweat beads off your wrist from time to time, as the strap may be exposed to soap, sweat, allergens, or contaminants for a long time, which can cause itchy skin.
10. If you wear it frequently, it is recommended to clean the watch every week. Wipe with a damp cloth and remove oil or dust with a mild soap. It is not recommended to use the watch in hot water. Water vapor could enter the sphere and damage the components.

WARNING:
This product is not a medical device. The Smartwatch and their applications should not be used for the diagnosis, treatment or prevention of diseases or ailments. To change your exercise and sleep habits, be sure to consult a qualified medical professional to avoid serious damages. Our company reserves the right to modify and improve any of the functions described in this manual without prior notice. At the same time, the company reserves the right to update the contents of the product. All contents are subject to the real product.

WARRANTY

1. The warranty covers quality problems caused by manufactur-ing, materials or design within the first year of purchase and battery and charger problems within the first 6 months.
2. About the fault caused by the user’s personal reasons, we don’t offer free warranty, as follows:
3. Disassemble or refit the product.
4. Caused by immodesty drop
5. All artificial damage or misuse (such as: make water into the host, the external force shatter, scratch damage of peripheral components, etc.), all these are beyond the scope of the warranty.
6. When ask for free warranty, you must provide a receipt of purchase.
7. If you met problems during use, please contact the shop customer service which you bought from.

References

• DCU Tecnologic

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>