akasa A-NUC70-A1B Compact 1.7L IP65 Waterproof Fanless Case User Manual
- June 12, 2024
- akasa
Table of Contents
akasa A-NUC70-A1B Compact 1.7L IP65 Waterproof Fanless Case
SAFETY WARNINGS
CAUTION
Electrostatic discharge (ESD) can damage system components. If an ESD-
controlled workstation is not available, wear an antistatic wrist strap or
touch an earthed surface before handling any PC components.
WARNING
Please be careful when unpacking and setting up this product as metal edges
can cause injury if not handled with care.
Contents
- Ethernet/USB/Power cable leakproof seal (green)
- HDMI cable leakproof seal (blue)
- USB cable
- Ethernet cable
- HDMI cable
- Power cable
- Thermal compound (for CPU)
- Thermal pad (for PCH)
- Thermal module
- Screws
- Screws for motherboard
- Washer (red)
- Thermal gap filler (for M.2 SSD)
- Thermal module (for M.2 SSD)
- Back plate screw (spare part)
- Back plate leakproof seal (spare part)
Installation
Please tighten the screw in the sequence above to achieve the best and optimum waterproof result.
Caution
Ensure the testing opening cap is securely tightened.
DO NOT open or remove the testing opening cap on the front panel!
In compliance with IP65, this fanless case is protected against the ingress of dust and is protected against low pressure jets of water from all practicable directions, provided that all caps and covers are firmly closed.
Limited warranty: AKASA ensure all of the workmanship and manufacturing of the case is in compliance with IP65, however, customer have to ensure the final assembly of the case with motherboard are installed properly for IP65 compliance.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>