HENDI 237687 Induction Stove with 4 Hobs User Manual

: June 12, 2024
: HENDI

HENDI 237687 Induction Stove with 4 Hobs

Dear Customer,

Thank you for purchasing this HENDI appliance. Read this user manual carefully, paying particular attention to the safety regulations outlined below, before installing and using this appliance for the first time.

Symbols

Symbol Read user manual and keep this with the appliance

For indoor use only

Symbol For item 237687 only

Symbols

NOTE : This manual is translated from original English manual using AI and machine translations

Technical specifications

A	237670	237687
B	380-400V3N- 50/60Hz
C	5000W I Br	17000W I Br
D	I	• 5000W: left front and right Rear 3500W:leftrear and right front
E	18-34kHz
F	Black ceramic glass
G	I
H	IPX3	IPX4
I	40 kg/Kr	100 kg
J	400 x 400(H)380mm	800 x 700 x [H]870 mm
K	12,5kg/ Kr	76 kg

A: Item no
B:Rated voltage and frequency
C:Rated input power
D: Power settings
5000W: left front and right Rear
3500W: left rear and right front /
- E: Operating frequency
- F: Hob surface material: Black ceramic glass
- G: Waterproof protection rating
- H: Maximum loading weight
- I: Dimensions
- J: Net weight
- K: Remark: Technical specification is subjected to change without prior notification

Safety instructions

Only use the appliance for the intended purpose it was designed for, as described in this manual.
The manufacturer is not liable for any damage caused by incorrect operation and improper use.
DANGER! RISK OF ELECTRIC SHOCK! Do not attempt to repair the appliance by yourself. Do not immerse the electrical parts of the appliance in water or other liquids. Never hold the appliance under running water.
NEVER USE A DAMAGED APPLIANCE! Check the electrical connections and cord regularly for any damage. When damaged, disconnect the appliance from the power supply. Any repairs should only be carried out by a supplier or qualified person to avoid danger or injury.
WARNING! When positioning the appliance, route the power cable safely if necessary to avoid unintentional pulling, being damaged, coming into contact with the heating surface, or causing a tripping hazard.
WARNING! As long as the plug is in the socket the appliance is connected to the power supply.
WARNING! ALWAYS switch off the appliance before disconnecting from the power supply, cleaning, maintenance or storage.
Only connect the appliance to an electrical outlet with the voltage and frequency mentioned on the appliance label.
Do not touch the plug/electrical connections with wet or damp hands.
Keep the appliance and electrical plug/connections away from water and other liquids. If the appliance falls into water, remove the power supply connections immediately. Do not use the appliance until it has been checked by a certified technician. Failure to follow these instructions will cause life threatening risks.
Connect the power supply into an easily accessible electrical outlet so you can disconnect the appliance immediately in case of emergency.
Make sure the cord does not come in contact with sharp or hot objects and keep it away from open fire. Never pull the power cord to unplug it from the socket, always pull the plug instead.
Never carry the appliance by its cord.
Never try to open the housing of the appliance yourself.
Do not insert objects into the housing of the appliance.
Never leave the appliance unattended during use.
This appliance should be operated by trained personnel in kitchen of the restaurant, canteens or bar staff, etc.
This appliance should not be operated by persons with reduced physical, sensory or mental capabilities, or persons that have a lack of experience and knowledge.
This appliance should, under any circumstances, not be used by children.
Keep the appliance and its electrical connections out of reach of children.
Never use accessories or any extra devices other than those supplied with the appliance or recommended by the manufacturer. Failure to do so could pose a safety risk to the user and could damage the appliance. Only use original parts and accessories.
Do not operate this appliance by means of an external timer or remote-control system.
Do not place the appliance on a heating object (gasoline, electric, charcoal cooker, etc.).
Do not cover the appliance in operation.
Do not place any objects on top of the appliance.
Do not use the appliance near any open flames, explosive or flammable materials. Always operate the appliance on a horizontal, stable, clean, heat-resistant and dry surface.
The appliance is not suitable for installation in an area where a water jet could be used.
Leave a space of at least 20 cm around the appliance for ventilation during use.
WARNING! Keep all ventilation openings on the appliance free from obstruction.

Special safety instructions

This appliance is intended for commercial use.
CAUTION! RISK OF BURNS! HOT SURFACES! The temperature of the accessible surfaces are very high during use. Touch only the control panel, handles, switches, timer control knobs or temperature control knobs.
CAUTION! This appliance will emit non-ionizing electromagnetic radiation.
An equipotential bonding terminal is provided to allow cross bonding with other equipment.
WARNING! Fat and oil become very hot during operation. Beware of this.
WARNING! Before obtaining access to terminals, all supply circuits must be disconnected.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
Only use the cookware of the recommended type and size recommended. (See —> Suitable cooking equipment).
Metallic objects such as knives, forks, spoons and lids should not be placed on the heating plate since they can get hot.
Do not install the appliance near objects and appliances that may be affected by a magnetic field, like, e.g., TVs, radios, bank cards and credit cards.
Do not operate this appliance by means of an external timer or remote-control system.
WARNING! If the heating surface is cracked or damaged, switch off the appliance to avoid the possibility of electric shock.
Do not place aluminium foil and plastic vessels on hot surfaces.
The surfaces are not to be used for storage.
When operating the appliance, be aware that rings, watches or similar objects worn by the user may become hot when they are too close to the heating surface.
Make sure that the appliance is not installed near water vapour or greasy vapours. The fan of the appliance will absorb these vapours, causing the appliance to accumulate grease or moisture. This may result in a short circuit in the appliance. Clean the grease filter regularly.
Do not place empty cookware on the appliance during operation as this may damage the cookware and result in serious damage to the appliance.
IMPORTANT! Always ensure that the high quality filter at the bottom isn’t blocked. Check it before operation and when needed, clean it.
Recommend to use the temperature mode(If included) for cast iron material of cooking equipment to avoid overheated.

Intended use

This appliance is intended to be used for commercial applications, for example in kitchens of restaurants, canteens, hospital and in commercial enterprises such as bakeries, butcheries, etc., but not for continuous mass production of food.
This appliance is designed for cooking a variety of food via heating the suitable cookware. Any other use may lead to damage of the appliance or personal injury.
Operating the appliance for any other purpose shall be deemed a misuse of the device. The user shall be solely liable for improper use of the device.

Grounding installation

This appliance is classified as protection class I and must be connected to a protective ground. Grounding reduces the risk of electric shock by providing an escape wire for the electric current.

This appliance is fitted with a power cord with grounding plug or electrical connections with grounding wire. The connections must be properly installed and grounded.

Power supply line connection

(Fig.1 on page 4)

Power supply line connection

A. Black
B. Brown
C. Grey
D. Blue
E. Green and yellow

ATTENTION! The power supply lines should be connected by authorized technician.

Control panel

(Fig.2 on page 4)

Control panel

Operation light
Turning knob
Power setting (Range: 1 – 11, level 1 is the lowest and level 11 is the highest)
Heating surface position (For item 237687 only)
Rear heating surface
Front heating surface

Remark: The content of this manual applies for all listed items unless specified otherwise. The appearance may vary from the shown illustrations.

Preparation before use

Remove all protective packaging and wrapping.
Check that the device is in good condition and with all accessories. In case of incomplete or damaged delivery, please contact the supplier immediately. In this case, do not use the device.
Clean the accessories and the appliance before use (See ==> Cleaning & Maintenance).
Make sure the appliance is completely dry.
Place the appliance on a horizontal, stable and heat resistant surface that is safe against water splashes.
Keep the packaging if you intend to store your appliance in the future.
Keep the user manual for future reference.
NOTE! Due to manufacturing residues, the appliance may emit a light odor during the first few uses. This is normal and does not indicate any defect or hazard. Make sure the appliance is well ventilated.

Operating instructions

Place a suitable cookware at the center of the heating surface of the appliance. (See -> Suitable cooking equipment)
Note: Do not place empty cookware as this may damage the cookware.
Connect the internal wires of the power cord to a suitable electrical supply outlet. (See –> Power supply line connection)
Operation light stays off when the line indicator of the knob and“0” the panel are aligned. Power level from 1-11 can be adjusted by turning clockwise and the green light on.
The appliance will shut down automatically if there is no operation detected after 4 hours. Overheat protection is included for the appliance. The heating function will be terminated if the temperature of the pot or plate is too high, or the display light will flash. In this case, turn the knob anti-clockwise to “0” on the panel and wait for several minutes to cool down. The appliance will resume to normal operation again.

Suitable cooking equipment

| Suitable| Not suitable
---|---|---
Bottom of cookware| Flat bottom (Fig.3 on page 5)| Curved, uneven, rounded bottom (Fig.4 on page 5)
Material| Cookware with iron, cast iron, magnetic stainless steel or enamelled iron bottom.| Cookware with ceramic, glass, copper, bronze, or aluminium bottom.
Diameter of
the bottom| 237670: Between 16 cm and 30 cm.
237687: Between 16 cm and 26 cm.| 237670:
Less than 16 cm or more than 30 cm.
237687:
Less than 16 cm or more than 26 cm
Type of cookware| Cookware with a bottom thickness over 1.5 mm.| Completely closed containers or cans

Suitable cooking equipment

Note: Using a pan or pot that’s not suitable for induction cooking may damage the appliance.

Cleaning & maintenance

ATTENTION! Always disconnect the appliance from the power supply and cool down before storage, cleaning & maintenance.
Do not use water jet or steam cleaner for cleaning and do not push the appliance under the water as the parts will get wet and electric shock might be resulted.
If the appliance is not kept in a good state of cleanliness, this can adversely affect the life of the appliance and result in a dangerous situation.
Food residues should be regularly cleaned and removed from the appliance. If the appliance is not cleaned properly, it will reduce its lifespan and may result in a dangerous condition during use.

Cleaning

Clean the cooled exterior surface with a cloth or sponge slightly dampened with a mild soap solution.
For reasons of hygiene, the appliance should be cleaned before and after use.
Avoid water contacting the electrical components.
Clean the inside of container with a non-abrasive detergent and rinse with clean water.
Never immerse the appliance in water or other liquids.
Never use aggressive cleaning agents, abrasive sponges, or cleaning agents containing chlorine. Do not use steel wool, metallic utensils, or any sharp or pointed objects for cleaning. Do not use petrol or solvents!
No parts are dishwasher safe.

Maintenance

Check the operation of the appliance regularly to prevent serious accidents.
If you see that the appliance is not working properly or that there is a problem, stop using it, switch it off and contact the supplier.
All maintenance, installation and repair work must be carried out by specialised and authorised technicians, or recommended by the manufacturer.

Transportation and Storage

Before storage, always make sure that the appliance has been disconnected from the power supply and completely cooled down.
Store the appliance in a cool, clean and dry place.
Never place heavy objects on the appliance as this could damage it.
Do not move the appliance while it is under operation. Disconnect the appliance from power supply when moving and hold it at the bottom.
Special care must be taken when moving or transporting the machine due to its heavy weight. With at least 2 persons or using a cart. Move the machine slowly, carefully, and never incline more than 45°.

Troubleshooting

If the appliance does not function properly, please check the below table for the solution. If you are still unable to solve the problem, please contact the supplier/service provider.

Problems	Possible cause	Possible solution
The appliance does not switch ON	Electrical power connection is not connected
properly with the electrical outlet.	Check the electrical power connection to

make sure it is connected properly
Cooling fan is operating even after the appliance is switched to Standby mode| This is normal. The cooling fan continues running in Standby mode for some time to cool down all internal elements.| Wait until the cooling fan stops rotating.
The green LED flashes once and switch off for 2 seconds| Without cooking utensil on the stove top or using an inappropriate cooking utensil| Place or replace a suitable pan with a flatted bottomed on the plate.
The red LED flashes twice and switch off for 2 seconds|

The device heats up extensively.
Parts are damaged

|

Clear the ventilation slots and let the device cool off for several minutes. If the error code has shown when the appliance is in cooling condition, contact the supplier.
Contact the supplier

The red LED flashes three times and switch off for 2 seconds| Stove-top overheat| Make sure water is inside the pan.
The red LED flashes four times and switch off for 2 seconds| Voltage under- loaded/ over-loaded| Make sure the voltage and frequency comply with the rating label shown on the product.

Warranty

Any defect affecting the functionality of the appliance which becomes apparent within one year after purchase will be repaired by free repair or replacement provided the appliance has been used and maintained in accordance with the instructions and has not been abused or misused in any way. Your statutory rights are not affected. If the appliance is claimed under warranty, state where and when it was purchased and include proof\ of purchase (e.g. receipt).

In line with our policy of continuous product development we reserve the right to change the product, packaging and documentation specifications without notice.

Discarding & Environment

Symbol

When decommissioning the appliance, the product must not be disposed of with other household waste. Instead, it is your responsibility to dispose to your waste equipment by handing it over to a designated collection point. Failure to follow this rule may be penalized in accordance with applicable regulations on waste disposal. The separate collection and recycling of your waste equipment at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment.

For more information about where you can drop off your waste for recycling, please contact your local waste collection company. The manufacturers and importers do not take responsibility for recycling, treatment and ecological disposal, either directly or through a public system.