mujoy ST64 Smart LED Edison Bulbs User Manual

mujoy ST64 Smart LED Edison Bulbs User Manual

THANK YOU
We appreciate the trust and confidence you have placed in us through the purchase of One Button. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs

Safety Information

WARNING: Keep out of reach of children. This product contains tiny components, which can cause choking or injury if ingested.

** WARNING:** Keep batteries away from children. This product contains coin/button cell batteries.

• If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep away from infants and small children at all times.
• If battery is swallowed or placed inside any part of the body, immediately seek EMERGENCY medical attention.
• Battery may rupture if the incorrect type of battery is used. Follow the instructions in this manual.
• Dispose of used battery promptly.

WARNING: Used batteries should be disposed of at an appropriate recycling center. Do not discard with normal household trash. DO NOT BURN.

** WARNING:** Any battery has the potential to leak harmful chemicals that can damage skin, clothing or the inside of the alarm. To avoid risk of injury, do not allow any substance leaked from the battery to come in contact with eyes of skin. Any battery has the potential to rupture and may even explode if exposed to fire or other forms of excessive heat. Use caution at all times when handling batteries.

• Do not use rechargeable or reusable batteries.
• Do not allow children to install batteries unsupervised.
• Follow battery manufacturer’s instructions for proper handling, storage and disposal of batteries.

CAUTION: Do not install

• In wet locations.
• Outside the premises (outdoors).
• Near the metal objects and mirrors that cause radio signal attenuation or shading it.
• Near the powerful main wiring.

Warranty

1 YEAR LIMITED WARRANTY
This product is guaranteed to be free of defects in materials and workmanship for 1 year from the date of purchase. Guarantee does not include normal wear and tear, batteries.Wireless Protocol: BLE

Package Contents

at it
e| Mylar
f| Reset button
g| Groove to pry out the battery
h| Battery CR2032
i| Battery covering
j| Groove to use coin to unscrew the battery covering

Operation

Prepare the remote control
NOTE: Battery will weaken with age and should be replaced before leaking takes place as this will damage the remote control. Dispose of the used battery properly and keep them out of the reach of the children.
Remove the mylar(E) beneath the battery covering(I).

Link with the remote control
Under factory condition (the lamp has been paired with the remote control), the lamp is not connected to the network:

1. On/Off/dimmer /CCT
   Click On/Key (B) to turn on or off the light, hold down to adjust the brightness, and double-click to switch the color temperature

2. Pair/untie lights
   Press On/key (B)3 times: enter the pairing state, and the Button indicator will blink. After the pairing is complete, it will be steady on for 3 seconds and then go off.

Press Reset (F) once: enter the unbinding state, and the Button indicator will blink. After the pairing is complete, it will be steady on for 3 seconds and then go off.

Network operation:

1. After the bulb enters the network, the Button will be automatically brought into the network and displayed on the APP (it is suggested that the light enters the network first); If the Button is added to the network first, hold down the ON/OFF key and reset key for 3S at the same time for pairing. The pairing indicator is steady ON for 3S and then goes OFF.
2. After the Button is connected to the network, you can customize the Button function in the APP interface to select controllable devices, scenes and events.
3. After removing the remote control through the APP, the online device will no longer be controlled by the remote control.

Factory default
Unscrew the battery covering(i) by coin and press the reset button(f) for 3 seconds to restore the remote control to factory default.

Low power notification and Replace the battery
Indicator(a) blinks twice fast notifies that the battery is low. Remove the battery covering(i) by coin.Use flat blade screwdriver to pry out the battery to be replaced.Install a new CR2032 battery(h). Replace the battery covering(I) on the remote control and screw the battery covering(i) by coin.

Quick Start Guide

Quick Start Guide
Step 1:
Download the App on App Store or Google Play.


Step 2:
Create an account and sign in.
Step 3:
Press ‘+’ button to add the device.

Step 4:
Follow the instructions on App.

Troubleshooting

CR2032 is installed correctly and still has power.
The light cannot be controlled by the remote control just after Touch-Link.| When you just finish the Touch-Link process, the devices need a sec to respond.| Wait for sec and try again.
The remote control cannot Touch-Link the light successfully.| •  The battery is out of charge.•  Touch-Link quantity reaches the upper limit.| Make sure the remote control still has power. If yes, the Touch-Link quantity may reach the upper limit. Reset the remote control andtry again. NOTE: The lights linked before need to be Touch-Linked again.
The remote control cannot control the lights.| The light is out of control range.| Make sure the light is not out of control range and move the remote control closer to the lights.
The remote control cannot Touch-Link the light after the indicator blinking for 60 seconds.| The remote control doesn’t capture the light.| Retry the Touch-Link process.
The remote control cannot Touch-Link the light.| The light has been linked with other remote control.| Make sure the light is reset to factory default.
The remote control cannot unpair the light after the indicator blinking.| The devices don’t respond the instructions well.| Retry the unpair process.

Certification

Safety certification: CE/FCC
Certification agreement: BLE
Usage Environment Requirements
Operating Temperature: 32°F to 104°F (0°C to 40°C)
Operating Humidity: Up to 85% non-condensing
Storage Temperature:’- 4°F to 140°F(-20°C to 60°C)
Environmental requirements: RoHS/REACH

FCC Statement

1. This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation. 15.21

Note: The grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user’s authority to operate the equipment. 15.105(b)
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

RF Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body.

IC Statement
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions:

1. This device may not cause interference; and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>