tuya B0CDBV9Z9B Smart Battery Camera Instruction Manual

tuya B0CDBV9Z9B Smart Battery Camera Instruction Manual

Packing list

1. Camera*l
2. Bracket*1
3. Mounting kit*1
4. User Manual “1
5. USB charging cable *1
6. Solar Panel(for option)*1
7. Operation instruction*1

Product appearance

Quick start

The wireless smart battery camera operates on the built-in internaal batteries and can also be powered

1. Download and install the App
   The wireless smart battery camera supports Android and i0S devices using the mobile APP. For your best experience, please scan the QR code below with your mobile phone, install the App, and follow the instruction to complete the user registration.
   

Please use your phone’s camera or Google Chrome to scan the QR code.
ATTENTION: Other methods or Apps may cause your privacy at risk.

2. Add the device
   Sign in to App ,tap on the Green “+ symboml on the upper right corner the tap on ” Add a New Camera ” and follow the prompts displayed on screen (please bring the camera and device close to the router wheninitially configuring).
   

Set Up the Camera

Step 1) After pressing the camera switch for 3 seconds, the camera will turn on. The camera will emit the scanning sound “Ding Dong Ding Dong” after it turned on (if you do not hear it please quickly press the power button twice).

Step 2) Tap on the “Add Camera Now” button on the App and follow the on screen instructions for the Battery Camera by long pressing the power button on the bottom of the camera. Once you hear the camera chime please tap on the circle next to “l heard the sound or saw the light on”, then tap on “Next Step”.

Step 3) On the following page please confirm that you hear the camera emitting a beeping sound and tap on the circle next to ” heard a beeping sound” then tap on “Next Step”.

Step 4) On the next page select your desired 2.4GHz WiFi network from the drop down menu under”WiFi Name (SSID)” then enter the password. To ensure a longer connection range, the camera only supports 2.4GHz Wifi with stronger wall penetration capability and does not currently support enterprise level authentication. Once complete please tap on “Next Step”.

Step 5) Point the lens of the camera at the QR code generated by the App about 7inches away until you hear a “Ding” sound.

Step 6) After a few moments the camera will provide a prompt sound indicating that the connection as successful. At this point the App will request that you place the camera at the location you wish to set it up at (you do not need to mount it at this point). Please check the signal strength to ensure that it is adequate for this location then tap on “Next Step”.

Bluetooth Set Up the Camera

1. Click the “Add Now” button in the app, press and hold the camera switch button for 3 seconds to turn on the camera, and the app will automatically search for devices that are on and not bound. Select the. device you want to bind in the search results for the next step.
   

2. Enter the name and password of the Wi-Fi network you want the camera to connect to. To ensure long-distance connection, the camera only supports 2.4GHz WiFi network with stronger wall penetration capability and does not support Wi-Fi with enterprise-level authentication. Please make sure that the Wi-Fi meets the requirements, click Nextafter completion, and the app can try to connect the camera to the Wi-Fi.
   

3. After a while, the camera will play a sound indicating that the connectionis successful. At this point, please seta name for the camera on the app and select the location where you want to place the camera. Click Finish to complete the pairing.

Wi-Fi connection troubleshooting:

24/7 customer service email: pmg aftersale@outlook.com fyou encounter any problems, please feel free to contact us.

• If you hear “WiFi password error” from the camera, please check whether the WiFi password you entered into the App is correct. Thefirst letterof the password is automatically capitalized on some devices.
• If you hear “Wi WiFi network has the correct name and make sure to place the camera as well as the device you installed the App on is near the not found” please check whether your selected router. Also make sure the network is broadcasting in 2.4GHz 5GHzis not supported.
• If you hear “Authentication error”, please ensure that the WiFi networkis not set up with enterprise level authentication as the device only supports security-levels of WPA-2 and below.
• lf you hear “Retrieving IP timeout” this in dicates that there are too many devices connected to your router and is unable to allocate additional space for the camera. Please remove some of your connected devices and restart the router before attempting to connect the camera again.
• If you hear “Cloud service connection fail” please make sure your routeris properly connected to the external network, typically this is your modem connection. This error is usually caused by a network disconnection or your router is set up for local area connections only. Please check your network connectivity then attempt to connect the camera again.

Install the camera

You can place the camera on a shelf or other surfaces to use, or you can installiton awall to use.

Select agood spot for your camera
Select a good spot for your camera, please install the camera in a position where its view is not blocked and ensure that it is within the coverage of the etwork. The PIR infrared sensor is more sensitive to movements across the camera’s field of view than movements toward or away from the camera.

Install the bracket

1. Screw fixing: Use the drilling tool to punch holes on the wall according to the hole distance of the base. It is recommended to mark the holes on the wall with a pencil before drilling. Screw the expansion nut into the holes on the wall, and then connect the bracket to the expansion nut with screws to complete the fixing.
   

2. Fix the camera Align the bracket screw with the screw hole on the back of the camera, and then rotate it to the tightened state.
   

3. Adjust the angle
   Adjust the camera to an appropriate angle, the best angle is about 15 degrees downward, and then tighten the base by rotati clockwise direction tofix the angle.
   

Share the camera

When you need to view the camera with other family members or friends, you can use this function. Only the administrator whose accountis bound with the camea for the first time can share and set the device. Other members can only view the live or playbacks of the device.

1. Find the camera you want to share on the App homepage or camera setting page. Find the button and enter the sharing page.
   

2. lick “Invite”, and a QR code will be generated for sharing.

3. For the members you need to share, find “Add Friend’ s Camera” in the “User” page to enter the scanning page.
   

4. Scan the QR code on your mobile phone, and you will receive the confirmation notification after success. The sharing will be completed after you agree.
   

Charge the camera

App will remind you to charge your camera when the battery s low. Please use the Micro USB cable to plug into the 5V/1.5A charging adapter to charge the camera. During charging, the camera’s indicator light s solid yellow, and when the camera s fully charged, the indicator light will turn into solid green. It will take 10 hours to fully charge the camera.

Indicator light status

Product specification

Firmware upgrade

When you connect your camera through the App, it will prompt you if the latest firmware is available. You can also manually check the firmware upgrade in the settings of the App.
Please make sure that your camerais fully charged or connected to the power adapter before upgrading the firmware, please do not cutoffthe power supply during the upgrading.

FCC warning

This device complies with part 15 of the FCC Rules. Operation is subject tothe following two conditions:

1. this device may not cause harmfulinterfelence.
2. this device must accept any interference received,including interference that may cause undesired operation.Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. Theselimits are designed to provide reasonable protection against harmfulinterference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there s no guarantee that interference will not occur in a particular installation. Ifthis equipment dos cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged totry to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.
• Connect the equipmentinto an outlet on a circuit different from that to which the receiver s connected.
• Consult the dealer or an experienced radio/ TV technician for help.
• To maintain compliance with FCC’s RF Exposure guidelines, this equipment should be installed and operated with minimum distance between 20¢m the radiator your body: Use only the supplied antenna.

FAQ

24/7 customer service email: pmg-aftersale@outlook.com Ifyou encounter any problems, please feel free to contact us.

1.Q:Camera permission management: How to invite family and friends to use

my camera together?

2.Q:Why doesn't the Wi Wi-Fi?

3.Q:Will the camera show red lights when night vision is activated?

A:The built-in infrared lamp beads make the camera only show some dim red lights when night vision is activated, but the image quality is still clear under no light environment.

4.Q:What are the requirements for Wi-Fi?

A: Please use a 2.4GHz wireless network. The device does not support the SGHz wireless network. Meanwhile, please set the Wi authentication method to WPA2-PSK or other lower level of security method. A password s required.

5.Q:How far should the camera be placed from the router?

A: After testing, the Wi-Fi connection distance can normally reach up t0 150 meters in the open area. However, the actual situation depends on the strength of Wi-Fi and its surrounding environment (thick walls, electromagnetic devices, large metal objects willall cause interference to the Wi-Fi signals). If the camera connection signal is weak or unstable, please place the camera as close to the router as possible.

6.Q:What s the maximum length of recording time?

A:VicoHome Awareness subscribed users: Maximur recording time up to3 minutes ifyou set duration to

7.Q:How to quickly view videos by category?

8.Q: What should | do when the device is in malfunction?

A: Long press the power bottom for 3 seconds to restartit. If there is no response, you can remove the rubber plug at the button of the camera. Pressthe reboot buttonto restart the camera while charging. 24/1 customer service email: pmg-aftersale @ outlook.com Ifyou encounter any problems, please feel free to contact us.

Customer Service:
pmg-aftersale@outlook.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>