BLUEDEE BD-BH200 Wireless Headphones User Manual
- June 12, 2024
- BLUEDEE
Table of Contents
BLUEDEE BD-BH200 Wireless Headphones
Packaging List
Product Overview
- Active noise cancellation(ANC)
- Active noise cancellation LED indicator
- USB-C charge port
- Volume -/Previous track
- Volume +/Next track
- Multi-Function button(MFB)
- Working LED indicator
- 3.5mm audio jack
- Built-in microphone
POWER ON/OFF
PowerOn:
Press the MFB button for 1 second, the indicator will light up blue for 1
second.
PowerOff:
Press and hold the MFB button for 3 seconds, the indicator will light up red
for 1 second, then all the indicators light off.
Active Noise Cancelltion (ANCJ ON/OFF
-
ANCOn:
Press the ANG button once, the indicator will light up green steadily. -
ANCOff:
Press theANC button once when ANG function is on, the indicator will light off.
Warm Tips:
- When the ANC is turned on. the headphone will always keep power on.
- When the ANC function is turned off, the headphone will automatically turn off if no device is connected within 20 minutes.
Connection with Your Device
- Pairing : Blue and red indicator flashes alternately.
- Connected : Blue indicator flashes every 10 seconds.
- When turned on, the headphone will automatically connect to the last connected device if available. If not, the headphone will go pairing.
- To connect to a new device: Please turn Bluetooth off of the connected device. T hen turn Bluetooth an the new device and select BD-BH200 to connect.
Phone Calls
Voice Assistant
- Press the MFB button twice to activate voice assistant.
- Does not work when BD-BH200 is connected to two devices at the same time.
Multi-Point Connection
How to connect two devices:
- Please connect one device and then turn off the Bluetooth on the connected device.
- Please turn on Bluetooth on the new device to connect.
- Turn on the Bluetooth on the previous device. The headphones will automatically connect back.
- Now, the headphones is connected to both devices.
How to switch headphones between two devices:
- When you need to switch devices, press the MFB button to pause, and start playback an the other device.
- When a call comes in, the headphones will also automatically select the device that is calling. After the call is over, it automatically cuts back to the original device.
MUSIC:
Connection via AUX
- When connected via AUX, ploy audio directly via the connected device.
- 3.5mm Audio Jack: You can use it as wired headphone. They give the sound an improvement when using the headphone wired in.
- When the battery is low or if you want to conserve battery, switch the Bluetooth mode to wired mode, and keep listening with the headphone jack.
Charge Your BD-BH200
-
Charging: Indicator will light red steadily.
-
BD-BH200 will sound a beep every 2 minutes when it is below 20% power.
-
Fully Charged: Indicator will light blue steadily.
-
Charging Time: About 2 hours
Specifications
- Input 5V/1A
- Charging Time 2±0.Sh
- Playtime >S0h
- Size 180X85x200mm
- Weight 8.6oz/245g
- Bluetooth Range 33ft/10m
WARNINGS :
- Do not remove any parts.
- Avoid dropping.
- Do not use under weather conditions or extreme temperatures.
- Do not submerge in water.
- Do not use any corrosive cleaner/oil to clean.
Manufacturer
Shenzhen Hanke Technology Co.,Ltd
Meipeng SKY311, No.3 Hebei Industrial Zone, Zhongxing Road,
Ma’antang Community, Bantian Street, Longgang District,
Shenzhen, Guangdong, China, 518000
Customer Service
This product is covered with Bluedee product and labor warranty for 12 months
from the date of its original purchase. Any concerns please email us as soon
as possible, Bluedee wil help you within 24 hours.
support@bluedee.com
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference.
- This device must withstand any interference received, including interference that may cause undesired operation.