BLUEDEE BH200 Wireless Headphones User Manual
- October 30, 2023
- BLUEDEE
Table of Contents
BH200 Wireless Headphones
Product Information
The product is a device with an antenna designed to meet general RF exposure requirements in portable exposure conditions. It should not be co-located or operated in conjunction with any other antenna or transmitter to ensure proper functioning.
Product Usage Instructions
When using the product, make sure to follow these guidelines:
- Do not use the device and its antenna(s) in conjunction with any other antenna or transmitter.
- Make sure the device is used in portable exposure conditions.
- Follow all instructions provided in the user manual for proper usage of the device.
- Ensure that the device is kept away from the body to avoid unnecessary radiation exposure.
By following these guidelines, you can ensure that the product operates effectively and safely.
Package List
Product Overview
- Active noise cancellation(ANC)
- Active noise cancellation
- LED indicator
- USB-C charge port
- Volume -/Previous track (5)
- Volume +/Next track Multi-Function button (MFB)
- Working LED indicator 8
- 3.5mm audio jack
- Built-in microphone
Power On
- Power On: Press the MFB button for 1 second, the indicator will light up blue for 1 second. .
- Power Off: Press and hold the MFB button for 3 seconds, the indicator will light up red for 1 second, then all the indicators light off.
Active Noise Cancellation (ANC) ON/OFF
- ANC On: Press the ANC button once, the indicator will light up green steadily.
- ANC Off: Press the ANC button once when ANC function is on, the indicator will light off.
Warm Tips:
- When the ANC is turned on, the headphone will always keep power on.
- When the ANC function is turned off, the headphone will automatically turn off if no device is connected within 20 minutes.
Connection with Your Device
- Pairing: Blue and red indicator flashes alternately
- Connected: Blue indicator flashes every 10 seconds
- When turned on, the headphone will automatically connect to the last connected device if available. If not, the headphone will go pairing.
- To connect to a new device: Please turn Bluetooth off of the connected device. Then turn Bluetooth on the new device and select BH200 to connect.
Phone Calls
Press the MB button Once Answer call/End call
Press and Hold the MB button
Reject call
Voice Assistant
- Press the MB button twice to activate voice assistant.
- Does not work when BH200 is connected to two devices at the same time.
Multi-Point Connection
How to connect two devices:
- Please connect one device and then turn off the Bluetooth on the connected device.
- Please turn on Bluetooth on the new device to connect.
- Turn on the Bluetooth on the previous device. The headphones will automatically connect back.
- Now, the headphones is connected to both devices.
How to switch headphones between two devices:
- When you need to switch devices, press the MB button to pause, and start playback on the other device.
- When a call comes in, the headphones will also automatically select the device that is calling. After the call is over, it automatically cuts back to the original device.
Music
Play / Pause
Press the MFB button Once
Next / Previous
Track Press and Hold the MFB button over 1 second.
Volume Up / Down
Press the + / – button Once
Connection via AUX 
- When connected via AUX, play audio directly via the connected device.
- 3.5mm Audio Jack: You can use it as wired headphone. They give the sound an improvement when using the headphone wired in. •
- When the battery is low or if you want to conserve battery, switch the Bluetooth mode to wired mode, and keep listening with the headphone jack.
Charge Your BD-BH200
-
Charging: Indicator will light red steadily.
-
BH200 will sound a beep every 2 minutes when it is below 20% power.
-
Fully Charged: Indicator will light blue steadily.
-
Charging Time: About 2 hours.
Specifications
- Input: 5V/1A
- Charging: 2‡0.5h
- Time Playtime: >50h
- Size: 180×85×200mm
- Weight: 8.6oz/245g
- Bluetooth Range: 33ft/10m
Warnings
- Do not remove any parts.
- Avoid dropping.
- Do not use under weather conditions or extreme temperatures.
- Do not submerge in water.
- Do not use any corrosive cleaner/oil to clean.
Manufacturer
Shenzhen hanke Technology Co., Ltd
Meipeng SKY311, No.3 Hebei Industrial Zone, Zhongxing Road,
Ma’antang Community, Bantian Street, Longgang District,
Shenzhen, Guangdong, China, 518000
Customer Service
This product is covered with Bluedee product and labor warranty for 12
months from the date of its original purchase. Any concerns please email us as
soon as possible, Bluedee will help you within 24 hours.
support@bluedee.com
FCC Compliance
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help.
This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.
Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement in
portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>