U-LINE UHRE115 15 Inch Refrigerator User Guide
- June 4, 2024
- U-Line
Table of Contents
15 Inch Refrigerator
User Guide
UHRE115 15 Inch Refrigerator
- 1 Class
- UHRE115
- 15” Refrigerator
WELCOME TO U-LINE
Congratulations on your U-Line purchase. Your product comes from a company
with over five decades of premium modular ice making, refrigeration, and wine
preservation experience. U-Line creates products focused on functionality,
style, and inspired innovations — paying close attention to even the smallest
details. Applications include residential, outdoor, ADA height compliant,
marine, and commercial. Complete product categories include Beverage Centers,
Wine Refrigerators, Ice Machines, Refrigerators, Freezers, and Dispensers. Our
advanced refrigeration systems, large and flexible capacities, and Built-In to
Stand Out ® clean integrated look allow you to preserve the right product, in
the right place, at the right temperature. Since 2014, U-Line has been part of
the Middleby family of brands. All products are designed, engineered, and
assembled in Milwaukee, Wisconsin, USA, and select products are available
worldwide.
PRODUCT INFORMATION
Looking for additional information on your product? User Guides, Spec Sheets,
CAD Drawings, Compliance Documentation, and Product Warranty information are
all available for reference and download at u-line.com.
PROPERTY DAMAGE / INJURY CONCERNS
In the unlikely event property damage or personal injury is suspected related
to a U-Line product, please take the following steps:
- U-Line Customer Care must be contacted immediately at +1.414.354.0300.
- Service or repairs performed on the unit without prior written approval from U-Line is not permitted. If the unit has been altered or repaired in the field without prior written approval from U-Line, claims will not be eligible.
Integrated Panel Dimensions
INTEGRATED PANEL
NOTICE
Due to differences in surrounding cabinetry the panel may not perfectly align
with the door. The procedure below is designed to provide a finished
integrated panel that seamlessly integrates with surrounding cabinetry. The
door panel must not weigh more than 20 lbs (10 kg). It is important to ensure
that all drilled holes are drilled to the correct depth in order to avoid
splits in the wood when the hardware is installed. When applying an integrated
panel to a unit, ensure that both sides are finished in order to prevent
warping. In some panel installations, the panel may be visible through the
glass while the door is open. A fully integrated door panel completely covers
the door frame and provides a built-in appearance.
Integrated Panel Preparation
- Cut the panels to the dimensions listed in the diagram below.
- Optional: Stain or Finish panel to desired stain or color. Be sure to closely follow the instructions provided by the manufacturer.
- Optional: Install handles and hardware.
Integrated Panel Installation
-
Fully open door/drawer.
-
Starting at a corner, pull the gasket away from the door/ drawer.
-
Continue to pull the gasket free from the gasket channel.
-
Upon removal, lay the gasket down on a flat surface.
-
Partially loosen the 3 screws, securing the top hinge to the cabinet.
-
Align the panel with the outside edge (opposite the hinge) and high enough to align with the highest point in the door/drawer.
-
Insert the panel underneath the top hinge and apply upward pressure while bringing the lower portion of the panel flush to the door inside the lower hinge. The panel will fit snuggly
-
Align door with cabinet. Tighten the top 3 screws, securing the top hinge to the cabinet. Align the Top Of Panel With Highest Point Of Door/Drawer.
NOTICE: Due to differences in floor construction or surrounding cabinetry, the panel may not sit flush with the top of the door/drawer. -
Secure integrated panel to door/drawer using clamps. A robust tape may also be used. U-Line recommends the use of bar clamps to secure the panel to the door/drawer. If using tape, be certain the tape will not damage the panel finish upon removal.
-
Using a 7/64″ (3 mm) drill bit, drill 6 pilot holes into the wood panel 1/2″ (12 mm) deep using the holes in the door/drawer frame as a guide.
NOTICE: It is important to ensure that all drilled holes are drilled to the correct depth in order to avoid splits in the wood when hardwood is installed. -
Locate 6 of the #6x 1-1/4″ (32 mm) screws provided with your unit.
-
Using a Phillips screwdriver, place one screw into each of the 6 pilot holes and screw down. Do not overtighten screws.
-
Be sure the screws force their way past the opening on the gasket channel and sit flush against the bottom of the channel.
-
Remove clamps from the door/drawer.
NOTICE: If the panel requires additional adjustment after removing clamps, slightly loosen each screw and adjust the panel as necessary. Tighten screws upon completion. -
Starting at the corners, re-install the gasket into the gasket channel in the frame. Make sure the gasket is fully seated. This may take some force.
Grille Installation
REMOVING AND INSTALLING GRILLE
WARNING
Disconnect electric power to the unit before removing the grille. When using
the unit, the grille must be installed.
Removing the grille
-
Disconnect power to the unit.
-
Slightly loosen three screws on the bottom hinge.
-
Remove two grille screws.
-
Slide the grille to the left and remove it.
Installing the grille
- Align cabinet and grille holes and secure, but do not over-tighten grille screws (3).
- Tighten three hinge screws (4).
- Connect power to the unit.
GENERAL INQUIRIES
U-Line Corporation
8900 N. 55th Street
Milwaukee, Wisconsin 53223 USA
Monday – Friday 8:00 am to 4:30 pm CST
T: +1.414.354.0300
Email: sales@u-line.com
u-line.com| SERVICE & PARTS ASSISTANCE
Monday – Friday 8:00 am to 4:30 pm CST
T: +1.414.354.0300
Service Email: onlineservice@u-line.com
Parts Email: onlineparts@u-line.com
---|---
CONNECT WITH US
Designed, engineered, and assembled in WI, USA
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>