FOREST CAL9090 Caledonian Square Raised Bed Instructions

FOREST CAL9090 Caledonian Square Raised Bed

Product Information

• Product Name: Caledonian Base’s
• Issue: 0122
• Manufacturer: Forest Garden
• Manufacturer Address: Oak Drive, Hartlebury Trading Estate, Hartlebury, Worcestershire, DY10 4JB
• EU Authorised Representative: Authorised Representative Service, 77 Camden Street Lower Dublin, D02 XE80, Ireland
• Recommended Tools (not supplied): Tape Measure, Pozidrive Drill & 2-3mm Drill Bits, Spirit Level, Screwdriver
• Fixing Pack Code: CALBASEFP

Usage Instructions

For CAL9090 & CALTRB9090

1. Position and secure one Base to the edge of your Caledonian. We recommend attaching your Base’s to the first tier before fully assembling your Caledonian.
2. Ensure both Base’s are flush to the edge.
3. Always pre-drill before screwing.
4. Check and tighten all the fixings applied to this product on a regular basis.

For CAL4501800

1. Position and secure one Base to the edge of your Caledonian. We recommend attaching your Base’s to the first tier before fully assembling your Caledonian.
2. Ensure both Base’s are flush to the edge.
3. Always pre-drill before screwing.
4. Check and tighten all the fixings applied to this product on a regular basis.

For CAL18090

1. Position and secure one Base to the edge of your Caledonian. We recommend attaching your bases to the first tier before fully assembling your Caledonian.
2. Ensure both bases are flush to the edge.
3. Always pre-drill before screwing.
4. Check and tighten all the fixings applied to this product on a regular basis.

For CAL130130

1. Position and secure one Base to the edge of your Caledonian. We recommend attaching your bases to the first tier before fully assembling your Caledonian.
2. Ensure both bases are flush to the edge.
3. Always pre-drill before screwing.
4. Check and tighten all the fixings applied to this product on a regular basis.

For Long Base and Short Base

1. Position and secure the Long Base to the edge of your Caledonian. We recommend attaching your bases to the first tier before fully assembling your Caledonian.
2. Ensure both bases are flush to the edge.
3. Always pre-drill before screwing.
4. Check and tighten all the fixings applied to this product on a regular basis.

Please note that timber is a natural material that may shrink and swell due to varying moisture content. Assembly of damaged parts may be deemed as acceptance and may affect the remedies you are entitled to. If the product is not constructed in accordance with the instructions or is altered in any way (e.g. painted), the manufacturer cannot be held liable for any resulting damage. The provided components may be heavy, so please lift with caution and with a minimum of 2 people.

Component Details

Each pack of CALBASE contains 2 x Base’s. The amount of packs provided will vary based on the size of your Caledonian raised bed.
If you are missing any parts or need more information, please contact our aftersales team at 0333 321 3142 or visit our website at www.forestgarden.co.uk.

CALEDONIAN BASE’S INSTRUCTIONS

We recommend using the following tools (not supplied):

PLEASE KEEP PLASTIC BAGS AND SMALL PARTS AWAY FROM CHILDREN

FIXING PACK CONTAINS

FIXING PACK CODE: CALBASEFP CHECK AND TIGHTEN ALL THE FIXINGS APPLIED TO THIS PRODUCT ON A REGULAR BASIS.

CAL9090 & CALTRB9090 STEPS

• Position and secure one Base to the edge of your Caledonian. We recommend attaching your Base’s to the first tier before fully assemblying your Caledonian.
• Position and secure the other Base to the edge of your Caledonian. Ensure both Base’s are flush to the edge.

IMPORTANT Assembly requires 2+ adults.

REMINDER
Always pre-drill before screwing.

CAL4501800 STEPS

• Position and secure one Base to the edge of your Caledonian. We recommend attaching your Base’s to the first tier before fully assemblying your Caledonian.
• Position and secure the other Base to the edge of your Caledonian. Ensure both Base’s are flush to the edge

CAL18090 STEPS

• Position and secure two Base’s to the edge of your Caledonian. We recommend attaching your Base’s to the first tier before fully assemblying your Caledonian.
• Position and secure the other Base to the edge of your Caledonian. Ensure both Base’s are flush to the edge.

CAL130130 STEPS

• Position and secure the Long Base to the edge of your Caledonian. We recommend attaching your Base’s to the first tier before fully assemblying your Caledonian.
• Position and secure the Short Base to the edge of your Caledonian. Ensure both Base’s are flush to the edge.

CHECK YOU HAVE ALL YOUR PARTS PRIOR TO ASSEMBLY

(The parts do not have codes on them. They are listed below should you need to order one.)
Timber is a natural material of which will shrink and swell as a result of varying moisture content.
Assembly of damaged parts may be deemed to be acceptance and this may affect the remedies you are entitled to. If the product is not constructed in accordance with the instructions, or is altered in anyway (e.g. painted), the manufacturer cannot be held liable for any resulting damage.

The components provided may be heavy. Please lift with caution and with a minimum of 2 people.

Caledonian Base’s (CALBASEPK2)

Label| Part Code| Description| No.
A| CALBASE| Base 450x32x900mm| 2

Each pack contains 2 x Base’s. The amount of pack’s provided will vary based on the size of your Caledonian raised bed.

Corner Caledonian Base’s (CAL130130BASE)

Label| Part Code| Description| No.
B| CALBASE1310| Long Base 450x32x1310mm| 1
C| CALBASE860| Short Base 450x32x860mm| 1

Use the labelled components to help identify the part code and description.

HEALTH & SAFETY

We strongly recommend that PPE (Personal Protective Equipment) is used throughout your build to ensure you are protected from any potential health and safety risks. Do not exempt yourself from wearing PPE.

TREATED TIMBER CONTAINING A BIOCIDAL PRODUCT CONTROL OF WOOD DESTROYING ORGANISMS
Active Ingredients – Propiconazole, Tebuconazole, IPBC, Permethrine, Benzyl-C12-16-Alkyldimethyl Chlorides. (Dip Treated) Basic Copper Carbonate, DDA Carbonate, DDA Chloride. (Pressure Treated)
Wear gloves when handling. Avoid inhalation of sawdust. Do not use in contact with drinking water or food. Do not use for animal bedding or in fish ponds. Dispose of treated wood responsibly.

Missing something or need more information?
Call our aftersales team on 0333 321 3142
Visit our website for spare instructions and more information www.forestgarden.co.uk

Forest Garden, Oak Drive, Hartlebury Trading Estate, Hartlebury, Worcestershire, DY10 4JB
EU Authorised Representative: Authorised Representative Service, 77 Camden Street Lower Dublin, D02 XE80, Ireland

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>