Great Forest Manufacture 7141-71SL Equinox Wireless Charging Pad Instruction Manual
- June 6, 2024
- Great Forest Manufacture
Table of Contents
Equinox Wireless Charging Pad
nstruction Manual
7141-71SL
Features:
- Wireless Charging Pad Surface
- Micro-USB Input Port
- LED Indicator
- Non-Slip Pads
What’s included:
1 x Wireless Charging Pad
1 x USB to Micro-USB Cable
1 x Instruction Manual
Tech Specifications
- Input power: 5V/1.5A
- Output power: 5W/1A
INSTRUCTIONS:
INSTRUCTIONS:
- Charging Mobile Devices:
• Ensure that your phone or tablet supports wireless charging. It will be listed in the manufacturer’s specifications.
• Connect the provided charging cable to a power source and to the micro USB port on the wireless charging pad (2). Once connected the LED Indicator will turn RED.
• Place the enabled device on the surface of the wireless charging pad(1). The LED will display RED/BLUE to indicate that the phone is charging.
• If the LED indicator is flashing BLUE and RED an unknown object is being detected between the wireless charging pad and the phone by FOD(Foreign Object Detection). The device will not begin to charge until the object is removed.
- Note: To charge devices, use only the accessory cable or the cable included with your own device by the manufacturer.
SAFETY PRECAUTIONS:
- WARNING-When using this product, basic precautions should always be followed:
- Read all the instructions before use.
- Never store or use this product in temperatures below 32°F (0°C) or above 115°F (45°C).
- Do not overcharge your phone. The unit may become hot under excessive use. Remove your phone once it is fully charged. Never charge your phone for more than 7 hours at a time.
- To reduce the risk of injury, close supervision is required when the product is used near children.
- Do not expose the device to moisture.
- Do not use the device in excess of its output rating. Overload outputs above the rating may result in a risk of fire or injury.
- Do not use the device if damaged or modified.
- Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion, or risk of injury.
- Do not disassemble the device. For repairs, seek a qualified service professional. Incorrect reassembly may result in a risk of fire or injury.
- Do not expose the device to fire or excessive temperatures. Exposure to fire or temperatures above 104°F (40°C) may result in an explosion.
- To ensure product safety, ensure that qualified service professionals use only identical replacement parts.
- Attachments on the back of your phone can impede the effectiveness of the wireless charger, and lead to overheating. Please remove attachments from the phone before
charging on this device.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for
FCC RF exposure statement:
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of the device, a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected.
FCC ID：2APR2-7141-716
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>