sygonix 2757593 Smart Wi-Fi Socket Instruction Manual

sygonix 2757593 Smart Wi-Fi Socket Instruction Manual

Intended Use

The product acts as a power socket and is equipped with a push button that turns the power supply to connected loads on and off.

An accompanying app controls the product (remote on/off, schedule, countdown, voice control, and power meter).

Warning labels in different languages are included in the package. Stick the language label in your language over or next to the language label on the product.

The product is intended only for the connection to a standard power socket with earth contact. Refer to the technical data section to learn more about the maximum permissible loads.

The product is only designed for indoor use. Keep away from water and high- humidity sources and the areas where these conditions occur (e.g. bathroom).

For safety and approval purposes, you must not rebuild and/or modify this product. If you use the product for purposes other than those described above, the product may be damaged. In addition, improper use can result in short circuits, fires, electric shocks or other hazards. Read the instructions carefully and store them in a safe place. Make this product available to third parties only together with its operating instructions.

This product complies with the statutory national and European requirements. All company names and product names are trademarks of their respective owners. All rights reserved

Delivery Content

• Wi-Fi socket
• Warning labels
• Operating instructions

Up-to-Date Operating Instructions

Download the latest operating instructions at www.conrad.com/downloads or scan the QR code shown. Follow the instructions on the website.

Application

• Compatible Android and iOS apps are available from their respective app stores.
• Search for “Smart Life – Smart Living” and download the application.
• Follow the onscreen instructions to complete the setup process.

Explanation of Symbols

The symbol with the lightning in the triangle is used if there is a risk to your health, e.g. due to an electric shock.

The symbol with the exclamation mark in the triangle is used to indicate important information in these operating instructions. Always read this information carefully.

Safety Instructions

Read the operating instructions carefully and especially observe the safety information. If you do not follow the safety instructions and information on proper handling in this manual, we assume no liability for any resulting personal injury or damage to property. Such cases will invalidate the warranty/guarantee.

a) General

• The unauthorized conversion and/or modification of the product is not allowed for safety and approval reasons. Do not open/disassemble!

• The product is designed in accordance with protection class I. Only a standard grounding mains socket of the public supply grid (a wall socket, for example) may be used as a power source.

• The mains socket to which the product is connected must be easily accessible.

• The product is not a toy and should be kept out of the reach of children. Position the product so it is out of the reach of children.

• The product is equipped with an enhanced protection against accidental contact. An integrated mechanism will release the holes of the receptacle only, if the two prongs of a power plug are inserted into the two holes at once.

• Take special caution when children are around.
  Children cannot recognize the danger arising from the incorrect use of electrical devices. There is a risk of a life-threatening electric shock!

• Do not leave the packaging material lying around carelessly as it may be a danger to children.

• Handle the product with care; it can be damaged by impacts, blows or falls even from a low height.

• If you have any questions that are not answered in this manual, please contact our technical service or another specialist.

b) Connected Devices

• Also observe the safety and operating instructions of any other devices which are connected to the product.

c) Operating Location

• The product may only be used in dry interiors; it must not get damp or wet! Never position the product in direct vicinity of a bathtub, shower, bathroom, swimming pool, or similar. Lethal hazard due to electric shock!

• The product must not be exposed to extremes of temperature, direct sunlight or strong vibrations.
  Keep the product away from strong magnetic fields generated by machines, electric motors or loudspeakers.

• Do not operate the device in environments where there are high levels of dust, flammable gases, vapours or solvents. There is a danger of fire and explosion!

• Do not use this product in hospitals or medical institutions. Radio waves may interfere with medical equipment. The same may also apply to other areas.

d) Handling and Use

• Never plug in, unplug or operate the product when your hands are damp or wet. There is a risk of a life-threatening electric shock! The same applies for the load that is plugged into the socket of the product.
• Never connect the product to the power supply immediately after it has been transferred from a cold room into a warm one (e.g. during transport). The condensation that forms might destroy the device. Moreover, there is danger of electric shock! Allow the product to reach room temperature. Wait until the condensation has evaporated. This might take several hours. Only then the product may be plugged into the mains socket and put into use.
• Always use the gripping surface to pull a mains plug out of the product.
• Never overload the product. Note the maximum permissible connected load in the chapter “Technical Data”.
• Do not connect in series! This can lead to an overload of the product! There is a risk of fire!
• Do not operate while covered! At higher connected loads, the product becomes warm, which can lead to overheating and potentially a fire if covered!
• Disconnect the product from the mains socket in thunderstorms for reasons of safety.
• Voltage-free only if unplugged
• Do not use the product if it is damaged. There is a risk of a life-threatening electric shock! In this case, dispose of the product in an environmentally correct manner. Safe operation can no longer be assumed if:
  • the product shows visible signs of damage
  • the product does not work at all or works poorly (leaking smoke or a smell of burning, audible cracking noises, discolouration to the product or the adjacent surfaces)
  • the product was stored under unfavourableconditions
  • it was exposed to heavy loads during transport
• Never pour any liquids above or next to the product. You run the risk of causing a fire or a fatal electric shock. If any liquid has still managed to enter the device, immediately switch off the power supply to the mains socket at which the product is connected (turn off the fuse/circuit breaker/residual current operated circuit breaker of the associated circuit). Only then can you unplug the product from the mains socket and contact a specialist. Do not use the product any longer.

Control Elements

1. Plug
2. On/Off button
3. LED Status indicator
4. Socket

Operation

a) LED Status Indicator

application.
Flashing slow blue 1x every 3 s| Device is ready to be paired with application in AP mode.

b) Power On

• Press the On/Off button (2) to switch the plug on. The status indicator light (3) will turn on to indicate that any connected loads will receive  power.
• Press the button again to turn off the power off. The LED indicator light goes off and any connected load will stop receiving power.

Maintenance and Cleaning

The product does not require any maintenance. You should not open/disassemble it. Repair or maintenance work must be carried out by a specialist

• Before cleaning, turn the product off and disconnect it from the power supply. Disconnect connected loads.

• You can use a clean, dry, soft cloth for cleaning.
  Dust can be very easily removed with a soft, clean brush and a vacuum cleaner.

• Do not use aggressive chemical or scouring cleaning agents, as this may lead to discolouration or changes in the material on the surface.

Declaration of Conformity (DOC)

Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau hereby declares that this product conforms to the 2014/53/EU directive.

• Click on the following link to read the full text of the EU declaration of conformity:
  www.conrad.com/downloads

Enter the product item number in the search box. You can then download the EU declaration of conformity in the available languages.

Disposal

This symbol must appear on any electrical and electronic equipment placed on the EU market. This symbol indicates that this device should not be disposed of as unsorted municipal waste at the end of its service life.
Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose of it separately from unsorted municipal waste. Spent batteries and accumulators, which are not enclosed by the WEEE, as well as lamps that can be removed from the WEEE in a nondestructive manner, must be removed by end users from the WEEE in a nondestructive manner before it is handed over to a collection point.

Distributors of electrical and electronic equipment are legally obliged to provide free take-back of waste. Conrad provides the following return options free of charge (more details on our website):

• in our Conrad offices
• at the Conrad collection points

at the collection points of public waste management authorities or the collection points set up by manufacturers or distributors within the meaning of the ElektroG

End users are responsible for deleting personal data from the WEEE to be disposed of.

It should be noted that different obligations about the return or recycling of WEEE may apply in countries outside of Germany

Technical Data

• Rated input …………………….230 V/AC, 16 A, 50 Hz
• Rated power …………………..max. 3680 W
• Heat-resistance ………………750 °C
• Plug/socket type ……………..F

Standby power

• consumption …………………..0.35 W
• Wi-Fi ……………………………..IEEE 802.11 b/g/n, 2.4 GHz
• Frequency range …………….2412 – 2472 MHz
• Transmission power…………max. 20 dBm
• WLAN security………………..WPA, WPA2, WPA/WPA2
• WLAN range…………………..15 m

Enhanced protection

• against accidental contact ..Yes
• Protection class ………………I
• Device name…………………..Smart Wi-Fi Power Meter Socket
• App OS………………………….Android, iOS
• App support ……………………Amazon Alexa, Google Home
• Operating conditions………..0 to 40 ºC, 5 – 85 % RH (non-condensing)
• Storage conditions…………..-10 to +60 ºC, 5 – 85 % RH (non-condensing)
• Dimensions (W x H x D) …..54 x 54 x 78 mm
• Weight …………………………..90 g

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent the technical status at the time of printing.
Copyright 2023 by Conrad Electronic SE.

References

• Conrad Electronic » All parts of success
• Download center

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>