KARCHER PGS 4-18 Telescopic Extension Instruction Manual

June 12, 2024
Karcher

KARCHER PGS 4-18 Telescopic Extension Instruction Manual

KARCHER PGS 4-18 Telescopic Extension


Intended use

F DANGER

Risk of injury from cuts

Avoid unintentional startup of the devic Make sure that the ON/OFF switch is not activated when inserting the battery pack.

If the device switches off automatically due to overload, release the ON/OFF switch immediately. Wait until the device or the battery pack is ready for operation again before starting it up again.

F DANGER

Improper use

Danger of death from incision injuries Only use the device for its proper use.
The telescopic extension with the possibility of at- taching cutting tools is intended for private use only.

  • The device is intended for outdoor use
  • For safety reasons, always hold the device firmly with both hands.
  • The device is intended for pruning and trimming small branches and twigs high on a The user stands securely on the ground.

Any other use, e.g. when climbing, for pruning low branches or for cutting material at ground level is pro- hibited. The user shall be liable for hazards arising as a result of improper use.

Environmental protection

The packing materials can be recycled. Please dispose of packaging in accordance with the en- vironmental regulations.
Electrical and electronic appliances contain valu- able, recyclable materials and often components such as batteries, rechargeable batteries or oil, which – if handled or disposed of incorrectly – can
pose a potential threat to human health and the environ- ment. However, these components are required for the correct operation of the appliance. Appliances marked by this symbol are not allowed to be disposed of togeth- er with the household rubbish.

Notes on the content materials (REACH)

Current information on content materials can be found at: www.kaercher.com/REACH

Accessories and spare parts

Only use original accessories and original spare parts. They ensure that the appliance will run fault-free and safely.
Information on accessories and spare parts can be found at www.kaercher.com.

 Scope of delivery

The scope of delivery for the appliance is shown on the packaging. Check the contents for completeness when unpacking. If any accessories are missing or in the event of any shipping damage, please notify your deal- er.

Symbols on the device

**** Wear non-slip safety shoes when work- ing with the device.

| Wear suitable head protection when working with the device.


| Electrical hazard. Keep a minimum dis- tance of 10 m away from overhead lines when working with the device.

Protective clothing

F DANGER

Risk of fatal injury from cut injuries. Wear suitable pro-
tective clothing when working with the device. Observe the local regulations for accident prevention.
Head protection = When working with the device, wear a suitable safety helmet that complies with EN 397 and is CE marked. When working with the device, wear hearing protection that complies with EN 352-1 and is CE marked.
For protection against flying splinters, wear suitable safety goggles that comply with EN 166 or are CE marked. Or wear a helmet visor that complies with EN 1731 and is CE marked.
Protective helmets with hearing protection and a safety visor are available in specialist shops.

Protective gloves Wear suitable protective gloves with cut protection equipment that comply with EN ISO 11393-4 and are CE marked when working with the device.

Safety shoes Wear non-slip safety shoes that meet EN 20345 and are CE marked when working with the device.

Description of the device

The maximum amount of equipment is described in these operating instructions. Depending on the model used, there are differences in the scope of delivery (see packaging).

See graphics page for illustrations Illustration A

Safety bracket Safety bracket lock
Telescopic extension lock
Unlocking button for angle adjustment Telescopic rod
Trigger lockout button Battery pack mount Power switch
Battery pack unlocking button Battery pack mount unlocking button Unlocking button for device mount
*Battery Pack Battery Power 18V

  • optional

Rechargeable battery pack The telescopic extension can be operated with a 18 V Kärcher Battery Power battery pack in conjunction with a corresponding work machine + battery mount.

Installation

WARNING

Risk of injury

Switch off the work machine and remove the battery be- fore performing work.

  1. Open the lock of the safety bracket and fold down the safety bracket.
  2. Mount the telescopic extension on the work ma-

Illustration C

  • Push the telescopic extension into the device
  • Fold the safety bracket upwards and close the lock latch of the safety
Note

Ensure correct fit!

Attaching the battery pack mount

WARNING

Risk of injury

Switch off the unit and remove the battery before per- forming work.

  1. Push the battery pack mount into the mount of the telescopic extension until it audibly latches into place.

Illustration B

Note

Ensure correct seating!

 Operation

 Installing the battery pack

  1. Push the battery pack into the battery pack mount until it audibly latches into place.

Illustration D

 Operation

  1. Switch the device on.

Illustration E

a Press the trigger lockout button. b Press the unit trigger.

Setting the working angle

  1. Press and hold the unlocking button for angle ad-
  2. Move the work machine to the desired

Illustration F

  1. Release the unlocking button for angle Note

Check whether the unlocking button for angle adjust- ment has correctly latched into place!

Extending the telescopic extension

  1. Open the lock of the telescopic
  2. Extend the telescopic

Illustration G

  1. Close the telescopic extension
Note

Check whether the telescopic extension lock is properly closed!
During longer work breaks, remove the battery pack from the telescopic extension and secure it against un- authorised use.

  1. Press the battery pack unlocking button to unlock the battery

Illustration H

  1. Remove the battery pack from the battery pack hold-

Finishing operation

  1. Remove the battery pack from the device (see Chapter Removing the battery pack).
  2. Clean the device (see Chapter Cleaning the tele- scopic extension).

 Removing the battery pack

  1. Press the battery pack mount unlocking button and pull out the battery pack mount.

Illustration I

Transport

CAUTION

Failure to observe the weight

Risk of injury and damage
Be aware of the weight of the device during transporta- tion.

CAUTION

Uncontrolled startup

Incision injuries
Remove the battery and the work machine before trans- port.

  • Secure the device against slipping and tipping over when transporting in

 Storage

CAUTION

Risk of injury and damage!

Observe the weight of the device during transport and storage.

Care and maintenance

CAUTION

Uncontrolled startup

Incision injuries

Remove the battery and the work machine before trans- port.

 Cleaning the telescopic extension

  1. Remove the work machine and the battery pack (see chapter Removing the battery pack).
  2. Clean the telescopic extension with a soft, dry

 Warranty

The warranty conditions issued by our relevant sales company apply in all countries. We shall remedy possi- ble malfunctions on your appliance within the warranty period free of cost, provided that a material or manufac- turing defect is the cause. In a warranty case, please contact your dealer (with the purchase receipt) or the next authorised customer service site.

(See overleaf for the address)

 Technical data


Tele- skopver längeru ng

Working voltage of the battery      V            18
Working range (max.)                    m           3,5
Length x width x height                 mm        1470 x 69 x 69 Subject to technical modifications.

Read More About This Manual & Download PDF:

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals