DURAVIT B21020002010 M Basin Mixer Tap Instructions
- June 12, 2024
- DURAVIT
Table of Contents
DURAVIT B21020002010 M Basin Mixer Tap
Product Information
- Product Name: Duravit
- Model Number: Not specified
- Key Features: Not specified
Product Usage Instructions
- Target Readership and Qualifications:
- The product may only be installed by a qualified plumber.
- Explanation of Key Words and Symbols:
- NOTICE: Addresses practices not related to physical injury.
- Optional Settings: No detailed information provided.
- Technical Data:
- Operating Pressure: Maximum 0.5 MPa,
- Recommended Test Pressure: 0.3 MPa, Hot Water
- Temperature: Maximum 0.5 MPa.
- Safety Instructions
- Cut and Crushing Injuries:
- Wear gloves when installing the product.
- Observe the local installation regulations and any country-specific standards at all times.
- Equalize pressure differences between cold and hot water connections.
- Observe the manufacturer’s instructions for installation with continuous flow heaters.
- Mounting Instructions:
- Flushing and Siliconizing:
- Tap unit malfunction due to dirty pipes:
- Flush the pipes according to the applicable standards before mounting the tap unit.
- Water damage:
- Enclose pipes with silicone that does not contain acetic acid.
Please note that the provided text-extract from the user manual is incomplete, and some information may be missing.
Important information
These instructions are part of the Duravit product and must be read carefully
and kept available at all times.
Target readership and qualifications
The product may only be installed by a qualified plumber.
Explanation of the key words and symbols
NOTICE
Addresses practices not related to physical injury.
- Link to the mounting instructions in this section
- Prompt for inspection (e.g. for scratches)
- Prompt to inspect for leaks and leak-tightness
- Prompt to wear gloves
- Optional settings
Technical data
- Operating pressure : max. 0.5 MPa
- Recommended: 0.3 MPa
- Test pressure: 0.5 MPa
- 1 MPa = 10 bar = 145 PSI
- Hot water temperature : max. 60 °C
Safety instructions
- Cut and crushing injuries
- Wear gloves when installing the product.
- Product and/or property damage
- Observe the local installation regulations and any country-specific standards at all times.
- Equalise pressure differences between cold and hot water connections.
- Observe the manufacturer’s instructions for installation with continuous flow heaters.
Mounting instructions
Flushing and siliconizing
NOTICE
- Tap unit malfunction due to dirty pipes
- Flush the pipes according to the applicable standards before mounting the tap unit.
- Water damage
- Enclose pipes with silicone that does not contain acetic acid.
Installation
Operation
Care & Maintenance
DURAVIT AG
- P.O. Box 240
- Werderstr. 36
- 78132 Hornberg Germany
- Phone +49 78 33 70 0
- Fax +49 78 33 70 289
- [email protected]
- www.duravit.com
Read User Manual Online (PDF format)
Loading......