DURAVIT 700330 Freestanding Bathtub Instruction Manual
- October 30, 2023
- DURAVIT
Table of Contents
DURAVIT 700330 Freestanding Bathtub
The text-extract from the user manual contains product information for various Duravit bathtub models:
- Cape Cod #700330 #700459
- DuraSquare #700430 #700460
- Luv #700434 #700461
- White Tulip #700468 #700469 #700470
- Soleil by Starck #700516
- Zencha #700462 #700463 #700464
The manual also includes important information, mounting instructions, and advice on using the correct silicone for installation.
Product Usage Instructions
If you are installing a Duravit bathtub, please follow these usage instructions:
- Read the mounting instructions carefully prior to installation.
- Ensure that you have the necessary qualifications and training to install the bathtub.
- Observe the local installation regulations and any country-specific standards at all times to avoid product and/or property damage.
- Download pre-installation data sheets from www.pro.duravit.com for additional guidance.
- Position the installation aids correctly by referring to diagram 5/6.
- Perform a leak and leaktightness check before use.
- Use alkoxy-based silicone (without acetic acid) for installation.
About the mounting instructions
These mounting instructions come as part of the Duravit bathtub and should be read carefully prior to installation.
MODELS
Explanation of the key words and symbols
NOTICE
Describes damage that does not affect the person.
Link to the mounting information in this section
Inspection (e.g. for scratches)
Indication of the length of time (e.g. 10 minutes)
Inspect to check for leaks and leak-tightness
Target readership and qualifications
The bathtub must only be installed by trained plumbing engineers.
NOTICE
Risk of product and/or property damage!
Observe the local installation regulations and any country-specific standards at all times.
Mounting instructions
Please read pre-installation data sheets prior to the installation. These are available to download on the Internet at www.pro.duravit.com.
Positioning the installation aids
The bathtub drain is not located in the centre.
Observe the dimensions from diagram 5/6 for the positioning of the
installation aids.
Using silicone without acetic acid
Use alkoxy-based silicone.
DURAVIT AG
P.O. Box 240
Werderstr. 36
78132 Hornberg
Germany
Phone +49 78 33 70 0
Fax +49 78 33 70 289
info@duravit.com
www.duravit.com
Order no. 56970/22.01.9 We reserve the right to make technical improvments and
design modifications to the products illustrated.
DURAVIT AG
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>