DURAVIT 700517 Freestanding Bathtub Instruction Manual

Table of Contents

DURAVIT-700517-Freestanding-Bathtub-product

The product is a Duravit bathroom fixture with various models and numbers. It includes the following models:

Prior to installation, please read the specifications sheets available for download at www.pro.duravit.us. It is important to inspect the product for any potential damage that may have occurred during transport.
Ensure that you have a working knowledge of construction techniques and code compliant plumbing installation. This is a professional grade product and must be installed by a licensed plumber.
During installation, it is important to protect the surface of lacquered bathtubs from dents and scratches. Avoid using suction lifters on the inside of lacquered bathtubs to prevent damage to the lacquered surface.
Inspect for leaks and ensure that all connections have a watertight seal. Observe the local installation regulations and any country-specific standards to prevent product and/or property damage.
If any damage is visible or if you are unsure about the installation process, do not proceed with the installation and consult a professional.
Optional accessories, such as the freestanding in-floor bathtub drain, can be purchased separately (not included).

The installation instructions come as part of the Duravit product and must be read carefully prior to installation.

Target readership and qualifications

This is a professional grade product. A working knowledge of construction techniques and code compliant plumbing installation are required for proper installation and user satisfaction. The product must be installed by a licensed plumber.

NOTICE: Is used to address practices not related to physical injury.

Product and/or property damage

The breach of local and country-specific regulations and standards can cause damage to the product and/or property damage.

Observe the local installation regulations and any country-specific standards at all times.

Careless handling can result in damage to the surface of lacquered bathtubs.

Prior to the installation

Products are in compliance with the following codes:

Tools

Package Content

DURAVIT-700517-Freestanding-Bathtub-fig-4

Optional accesories (not included)

DURAVIT-700517-Freestanding-Bathtub-fig-8

Inspect bathtub for any potential damage that may have occurred during transport.
Do not install if any damage ist visable.
NOTICE: Suction lifters can cause damage to the surface of lacquered bathtubs.
Attach suction lifters to the inside of laquered bathtubs to avoid damage to laquered surface.
NOTICE: Tilting the bathtub on its side can damage the bathtub.
Place cardboard/blanket on the floor.
Turn bathtub over.
Connect tailpiece to the bathtub drain.
For Vero Air/Happy D.2 Plus: Connect waste and overflow.
Level the feet before setting the bathtub.
Ensure floor area is clear and level.
Compensate irregularities by adjusting tub feet.
Observe the dimensions for the positioning of the drain (see Chapter “Measurements”).
Position the installation aids accordingly.
Position bathtub.
Connect bathtub to drain system.
Remove installation aids.
Slide straps under the bathtub.
Fill the bathtub with water.
Inspect for potential leaks.
Make sure to water test fittings.
NOTICE: Apply silicone recommended for acrylic/mineral cast bathtubs only.
Apply 100% silicone sealant around the base of the bathtub.
Leave a small area open.
Let it sit for 24 h before draining.