KARCHER SE 4002 Washing Sucker Instruction Manual

SE 4002

Register
your product
www.kaercher.com/welcome

SE 4002 Washing Sucker

General notes

Dear Customer,
Please read and comply with these original instructions prior to the initial operation of your appliance and store them for later use or subsequent owners.
This appliance has been designed for use in private households and is not intended for commercial use.
– By purchasing this appliance you have become the owner of a spray extraction appliance for maintenance or basic cleaning of carpeting with a deep cleaning effect.
– With a hard surface insert for the spray-ex floor nozzle (in the scope of delivery) even hard surfaces can be cleaned.
– With the relevant accessories (in the scope of delivery) it can also be used as a multi-purpose vacuum cleaner. Proper use
** The packaging material can be recycled. Please do not place the packaging into the ordinary refuse for disposal, but arrange for the Environmental protection proper recycling.
Old appliances contain valuable materials that can be recycled. Please arrange for the proper recycling of old appliances. Please dispose your old appliances using appropriate collection sys- tems.
Electrical and electronic devices often contain components which could potentially pose a danger to human health and the environment if handled or disposed of incorrectly. However, these components are necessary for the proper operation of the device. Devices marked with this symbol must not be disposed of with regular household rubbish.
Notes about the ingredients (REACH)
You will find current information about the ingredients at: www.kaercher.com/REACH (See address on the reverse)
Customer Service
Our KÄRCHER branch will be pleased to help you further in the case of questions or faults. (See address on the reverse)
Accessories and Spare Parts
Only use original accessories and spare parts, they ensure the safe and trouble-free operation of the device. For information about accessories and spare parts, please visit www.kaercher.com.
Warranty**
The terms of the guarantee applicable in each country have been published by our respective national distributors. We will repair possible faults on your unit free of charge within the warranty period, insofar as the faults are caused by material defects or defective workmanship. Guarantee claims should be addressed to your dealer or the nearest authorized customer service centre, and supported by documentary evidence of purchase.

Safety instructions

Apart from the notes contained herein the general safety provisions and rules for the prevention of accidents of the legislator must be observed.
Any use of the machine in contravention with the following instructions will lead to warranty claims being rendered void.
– This appliance is not intended for use by persons with limited physical, sensory or mental capacities or lacking experience and/or skills, unless such persons are accompanied and supervised by a person in charge of their safety or they have received precise instructions on the use of this appliance and have understood the resulting risks.
– Children must not play with this appliance.
– Supervise children to prevent them from playing with the appliance.
– Cleaning and user maintenance must not be performed by children without supervision.
– Keep packaging film away from children
– risk of suffocation!
– Switch the appliance off after every use and prior to every cleaning/maintenance procedure.
– Risk of fire. Do not vacuum up any burning or glowing objects.
– The appliance must provide of a stable ground.
– The operator must use the appliance properly. He must consider the local conditions and must pay attention to third parties, in particular children, when working with the appliance.
– Check the faultless condition of the appliance and the accessories before using it. Otherwise, the appliance must not be used.
– Never dip the machine, the cable or the plugs in water or other liquids.
– It is not allowed to use the appliance in hazardous locations. If the appliance is used in hazardous ar- eas the corresponding safety provisions must be observed.
– Protect the appliance against external weather, humidity and heat sources.
– Should the appliance fall down, it must be check by an authorised after sales service as internal disturbances could be present, which constrain the safety of the product.
– Do not suck in toxic substances.
– Do not use the machine to vacuum clean plaster of Paris, cement, etc. that can harden on coming into contact with water and can thus hamper the functioning of the machine.
– Always place the machine in a horizontal position during operation.
– Only use cleaners recommended by the manufacturer and comply with their application, disposal and warning guidelines.
Risk of electric shock
– Only connect the appliance to properly earthed sockets.
– The appliance may only be connected to alternating current. The voltage must correspond with the type plate on the appliance.
– Never touch the mains plug and the socket with wet hands.
– Do not pull the plug from the socket by pulling on the connecting cable.
– Check the power cord with mains plug for damage before every use. To avoid risks, arrange immediately the exchange by an authorized customer service or a skilled electrician, if the power cord is damaged.
– To avoid accidents due to electrical faults we recommend the use of sockets with a line-side currentlimiting circuit breaker (max. 30 mA nominal tripping current).
– Only use a splash proof extension cable with a minimum section of 3×1 mm².
– If couplings of the power cord or extension cable are replace the splash protection and the mechanical tightness must be ensured.
– Please switch off the machine first using the main switch before disconnecting the machine from the mains.
WARNING
Certain materials may produce explosive vapours or mixtures when agitated by the suction air!
Never vacuum up the following materials:
– Explosive or combustible gases, liquids and dust particles (reactive dust particles)
– Reactive metal dust particles (such as aluminium, magnesium, zinc) in combination with highly alkaline or acidic detergents
– Undiluted, strong acids and alkalies
– Organic solvents (such as petrol, paint thinners, acetone, heating oil).
In addition, these substances may cause  the appliance materials tocorrode.
Symbols in the operating instructions
DANGER
Immediate danger that can cause severe injury or even death.
WARNING
Possible hazardous situation that could lead to severe injury or even death.
CAUTION
Possible hazardous situation that could lead to mild injury to persons or damage to property.
ATTENTION
Pointer to a possibly dangerous situation, which can lead to property damage.

Start up

Description of the Appliance
When you unpack the system, check that everything is complete. If there are any missing parts or you detect any transport damage when unpacking, please inform your deal- er immediately.
Illustrations on fold-out page!
Illustration 1

1 Motor casing
2 Carrying handle
3 Foam filter
4 Filter lock
5 Power cord with plug
6 Storage, power cord
7 Switch for suction (0 / I)
8 Switch for spraying (0 / I)
9 Release fresh water reservoir
10 Fresh water tank
11 Container
12 Swivel casters
13 Connection for the suction hose of the multi-purpose vacuum cleaner
14 Connection spray hose
15 Spray/suction hose| 16 Handle
17 Surrounding air separator
18 Spray lever
19 Lock key for spray mist
20 Lock lever21 Spray / suction tubes 2 x 0.5 m
22 Storage for suction tubes and accessories
23 Spray-ex floor nozzle for carpet cleaning, with hard
surface attachment
24 Washer nozzle for cleaning upholstery
Accessories wet and dry vacuuming
25 Attachment for wet/dry vacuuming
26 Floor nozzle with hard surface insert
27 Crevice nozzle
28 Upholstery nozzle
29 Filter bag
---|---

Before Startup
Illustration 2 
→ Remove the fresh water reservoir.
Press the release and remove the tank.
Note: The motor casing can only be removed if the fresh water reservoir was removed first.
Illustration 3
→ Remove the motor casing. For this, fold the carrying handle forward to unlatch the reservoir. Remove the accessories and swivel casters from the reservoir.
Illustration 4
→ Turn the container, press in the steering roller in the openings at the base of the container till the endpoint.
Illustration  5
Turn the motor casing around and attach the foam filter to the filter basket.
→ Insert the filter cover and turn to lock.
→ nstall the motor casing. Pull up on the carrying handle to lock.
Illustration 6
→ Install the fresh water reservoir. Insert the bottom part first and then press toward the top on the motor compartment to check if it is locked in.
Illustration 7
→ Attach the suction hose and the spray hose to the connectors on the appliance. Note : Press the suction hose tightly into the connector to lock it into place.
Illustration 8
→ Connect the spray/suction pipes and attach to the handle. Center the locking lever when attaching it, turn clockwise to lock.
→  Attach the floor nozzle to the spray/suction pipes and secure with locking lever. The appliance is now prepared for wet cleaning.
**   CAUTION Always work with an inserted foam filter – during wet as well as dry vacuum cleaning!
Operations Wet cleaning carpets/hard floors/upholstery
****CAUTION Check the object to be cleaned prior to using the appliance in an inconspicuous place for colour fastness and water resistance. Do not clean water-sensitive floor coverings such as wood floors (the moisture could penetrate and damage the floor).
NOTICE Warm water (max. 50°C) will increase the cleaning effect.
Wet cleaning of carpeted floors**

→ Use the wash floor nozzle.
→Work without the hard surface insert.
Please only use the carpet cleaner RM 519.
Wet cleaning of hard surfaces
→ Use the wash floor nozzle.
→Slide the attachment for hard surfaces onto the spray ex floor nozzle from the side. The bristles should point towards the back.
Wet cleaning of upholstery
→  Use the wash hand nozzle.
Fill up fresh water reservoir
Note: You can remove the water reservoir to fill it or you can fill it directly on the appliance.
Illustration 9

• Flip the reservoir cover up.
• Add 100 – 200 ml (volume depends on degree of contamination) of RM 519 into the fresh water res- ervoir, then add tap water – do not overfill.
• Close the reservoir cover.

Start working
Illustration 10
→ Insert the mains plug into the socket.
→Press the switch for suction (position I), suction turbine is running.
Illustration 11
→Close fully the surrounding air separator at the handle.
Illustration 12
→ Press the switch for spraying (position I), the detergent pump is ready.
Illustration  13
Use the lever on the spray handle to spray on detergent solution.
Illustration 14
→For continuous spray, the spray lever can be locked; for this, activate the spray lever and pull the locking key toward the rear.
→Run across the surface to be cleaned in overlapping paths. Pull the nozzle backwards (do not push).
Emptying the reservoir during operation
Note: If the container is full, a float closes the suction opening, and the appliance works at a higher speed.
Switch off the appliance immediately, and empty the container.
→Switch the appliance off by pressing the switch for suction and spraying (position 0).
→ Separate the spray/suction hose and the spray hose from the appliance.
Note: Possibly remaining water can drip out, therefore you should place these intothe  shower or bathtub.
→Remove the accessories and the fresh water reservoir and unlatch the motor casing.
→ Remove the motor casing and empty the reservoir.
Cleaning tips/mode of operation
– Always work from the light to the shade (from the window to the door).
– Always work from the cleaned to the uncleaned surface.
– Rugs with jute backing can shrink if too much water is used and can bleed colours.
– Brush high-fiber rugs in the direction of the weave after cleaning (using a fiber brush or a scrubber).
– Water-proofing the fabric using Care Tex RM 762 after the wet cleaning prevents a quick resoiling of the textile surface.
– Do not step on cleaned surfaces until they have dried and do not place furniture on them to avoid pressure spots or rust stains.
Cleaning methods
Light/normal contamination
→ Turn on suction and spraying (position I).
→ Spray and simultaneously suction off detergent solution in one work cycle.
→Switch off the spray switch and suction off the remaining cleaning solution.
→ After cleaning the carpets, reclean them using clear, warm water and waterproof if needed.
Heavy soiling or stains
→  Switch on sprayer (position I).
→ Apply detergent solution and allow to react for 5 minutes (vacuuming is switched off).
→Clean the surface just like you would with light/normal soiling.
→ After cleaning the carpets, reclean them using clear, warm water and waterproof if needed.
End wet cleaning process
→  Rinse the spray tubes in the appliance as follows:
Fill the detergent container with about 1 liter of clear water.
Hold the nozzle above the drain, and switch on the spraying pump until the clear water has been consumed.
Dry vacuum cleaning
CAUTION
Always work with the filter bag inserted, except when a cartridge filter is used (optional accessory).
The reservoir and accessories must be dry to prevent parts from sticking together.
Illustration15
→  Insert a filter bag.
Illustration 16
→ Use the adapter for wet/dry vacuuming Attach the adapter to the handle, turn the locking handle to secure it.
→ Select the desired accessories and attach to the spray/suction pipes or directly to the attachment.
→  Switch on suction (position I).
Vacuuming hard surfaces
Illustration 17
→  Insert the hard surface inlay into the floor nozzle.
The bristles should point towards the front.
Vacuuming carpeted floors
Illustration 18
→ Work without the hard surface insert.
→  Use the surrounding air separator to adapt the suction force.
Note:  Close the surrounding air separator again after use!
Wet vacuum cleaning
Caution: Do not use a filter bag! Immediately switch the appliance off if foam forms or liquids escape!
Note: If the container is full, a float closes the suction opening, and the appliance works at a higher speed. Switch off the appliance immediately, and empty the container.
→ Use washing nozzle to vacuum up wet dirt/water. If you use a crevice nozzle:
→ Attach and secure the adapter for wet/dry vacuuming. Install the crevice nozzle directly to the adapter.
Switch on suction (position I).
Illustration 19
→ Open the surrounding air separator if water is suctioned from a tank. Close it again after use.
→ Empty the full reservoir (refer to chapter “Empty reservoir”).

Shutting down

→ Turn off the appliance.
→ Empty the full reservoir (refer to chapter “Empty reservoir”).
→ Rinse the reservoir thoroughly with clear water.
→ Separate the handle, the spray/suction hoses and the wash nozzle from each other; open locking le- ver to achieve this (centre position),
→ Flush the accessories separately under running water and let air dry.
→Clean the foam filter under running water; let it dry before reinserting it.
→Leave the appliance open to let it dry.
→ Storing the appliance. Store the accessories on the appliance and store in dry rooms.

Maintenance and Care

DANGER
Turn off the appliance and remove the mains plug prior to any care and maintenance work.
Repair works may only be performed by the authorised customer service.
WARNING
Do not use abrasives, glass or universal cleaners! Never immerse the appliance in water.
Clean the spray nozzle
With an uneven spray jet.
Illustration 20
→  Loosen nozzle attachment and pull out, clean or replace spray nozzle.
Clean the sieve in the fresh water reservoir
1 x year or as needed.
Illustration 21
→   Turn the lock and loosen it. Take out the sieve and rinse it with water.

Faults

No water exiting from nozzle
→  Fill up fresh water reservoir.
→ Check the fresh water reservoir for correct fit.
→ Detergent pump defective, contact customer service.
Spray stream uneven
→  Clean the spray nozzle of the washing nozzle.
Insufficient vacuum performance
→  Close the surrounding air separator at the handle.
See diagram 11
→Accessories, suction hose or suction tubes are clogged, please remove the obstruction.
→ Filter bag is full: Insert new filter bag.
→ Cleaning the foam filter.
Detergent pump noisy
→ Fill up fresh water reservoir.
Appliance is not running
→ Plug in the mains plug.
→The overheat alarm has been triggered, please allow appliance to cool down.

Specifications

Subject to technical modifications!

THANK YOU!
MERCI! DANKE! GRACIAS!
Register your product and benefit from many advantages.
www.kaercher.com/welcome Rate your product and tell us your opinion.
www.kaercher.com/dealersearch
Alfred Kärcher SE & Co. KG
Alfred-Kärcher-Str. 28-40
71364 Winnenden (Germany)
Tel.: +49 7195 14-0
Fax: +49 7195 14-2212 http://kaer.ch/er/?l=TwSoJtl9IUOwZyAe1rHDyw

Documents / Resources

| KARCHER SE 4002 Washing Sucker [pdf] Instruction Manual
SE 4002 Washing Sucker, SE 4002, Washing Sucker, Sucker
---|---

References

• Beas Gong Yoga
• Cleaning equipment and pressure washers | Kärcher International
• Cleaning equipment and pressure washers | Kärcher International
• kaercher.com.de
• Dealer Search | Kärcher International
• Home and Garden Warranty Registration USA - Kärcher

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>