Hotpoint AH12H12D5B PTAC Heat Pump Unit with Electric Heat Backup 30 Amps Owner’s Manual
- June 12, 2024
- Hotpoint
Table of Contents
AH12H12D5B PTAC Heat Pump Unit with Electric Heat Backup 30
Amps
Owner’s Manual
AH12H12D5B
Hotpoint® PTAC Heat Pump Unit with Electric Heat Backup 30 amps, 230/208 Volt
AH12H12D5B PTAC Heat Pump Unit with Electric Heat Backup 30 Amps
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
ELECTRICAL WIRING
- All wiring, including installation of receptacle, must be made in accordance with local electrical codes and regulations.
NOTE: Aluminum wiring may pose special problems – consult a qualified
electrician.
GRILLE OPTIONS
- Stamped Aluminum Grille – RAG70
ELECTRICAL CONNECTION
- 230/208 volt units must be plugged into a receptacle. Installation must comply with local electrical codes and regulations.
- Power cord is permanently attached on all Hotpoint chassis.
WALL CASE DIMENSIONS
RAB80 WALL
SLEEVE
Heavy-gauge galvanized steel, with insulation, for quick self-assembly. A –
42”, B – 13-3/4”, C – 16”
MAXIMUM CORD EXTENSION
WALL OPENING DIMENSIONS
Add 1/4” to A and C dimensions for all cut-outs. RAB80 16-1/4” Min. H x
42-1/4” Min. W
AH12 ELECTRIC HEATER
| 230/208 VOLT | LINE CORD CONNECTED UNITS |
|---|---|
| Heater Watts | 5,000 / 4,100 |
| Heater BTU | 15,000 / 12,200 |
| Heater Amps | 22.3 / 21.0 |
| Min Circuit | 30 |
| Recommended protective Device | 30 amp time-delay fuse or breaker |
AH12 HEAT PUMP
| Heat Pump Watts | 895 / 855 |
|---|---|
| Heat Pump BTU | 10,800 / 10,500 |
| COP | 3.2 |
FEATURE AND BENEFITS
-
12,000 / 11,800 cooling BTU
-
10.5 EER
-
10,800 / 10,500 heating BTU
-
3.2 COP
-
R32 Refrigerant – Environmental friendly, low GWP (Global Warming Potential)
-
3-Speed Fan – Give guests control over their comfort with three fan speeds to choose from
-
4-Temperature Limiting Options – Easily select one of four temperature ranges for peak efficiency and total customer comfort
-
Intuitive Display – Allow guests to easily customize their preferred settings and reduce maintenance calls with an easy-to-use control panel
-
Power Cord (LCDI) Included – Hotpoint PTACs come with everything needed for a quick and easy installation
-
Automatic Emergency Heat – Keep guests comfortable with a heating option that uses electric resistance heat in heat pump mode
-
Freeze and Frost Protection – Automatic freeze and indoor frost control keep units operating in peak condition
-
Auto Power Recovery – In case of power failures, units automatically resume their operation when power restores, reducing maintenance calls
-
Self Diagnostics – Quickly and easily identify service needs with a nine-point diagnostic code system
-
Backed by an Industry Leader – With a long history of creating durable products at an affordable price, Hotpoint is your trusted PTAC brand
PRELIMINARY SPECIFICATIONS – SUBJECT TO CHANGE