Hotpoint AH12H07D3B PTAC Heat Pump Instructions
- June 12, 2024
- Hotpoint
Table of Contents
Hotpoint AH12H07D3B PTAC Heat Pump
Product Information
- Product Model: AH12H07D3B
- Product Type: Electric Heater and Heat Pump
Electric Heater Specifications:
- Watts: 3,500 / 2,897
- BTU: 10,900 / 8,900
- Amps: 15.3 / 13.7
- Minimum Circuit: 20 amps
- Recommended Protective Device: 20 amp time-delay fuse or breaker
Heat Pump Specifications:
- Watts: 485 / 465
- BTU: 6,200 / 6,000
- COP: 3.6
Product Usage Instructions
Dimensions and Installation: Wall Case Dimensions:
- A Dimension: 30 inches
- C Dimension: 70 inches
Maximum Cord Extension: 30 inches Wall Opening Dimensions:
- Add 1/4 inch to A and C dimensions for all cut-outs.
- RAB80 Minimum Height: 16-1/4 inches
- RAB80 Minimum Width: 42-1/4 inches
Electric Heater Usage: For the electric heater unit:
- Connect the unit to a 230/208 volt line cord.
- Ensure the minimum circuit is 20 amps.
- Use a 20 amp time-delay fuse or breaker as a recommended protective device.
Heat Pump Usage: For the heat pump unit:
- Connect the unit to the power supply.
- Follow the provided electrical specifications.
AH12H07D3B
Hotpoint® PTAC Heat Pump Unit with Electric Heat Backup 20 amps, 230/208 Volt
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES) ELECTRICAL WIRING
All wiring, including installation of receptacle, must be made in accordance
with local electrical codes and regulations.
NOTE: Aluminum wiring may pose special problems – consult a qualified
electrician.
GRILLE OPTIONS
Stamped Aluminum Grille – RAG70
ELECTRICAL CONNECTION
- 230/208 volt units must be plugged into a receptacle. Installation must comply with local electrical codes and regulations.
- Power cord is permanently attached on all Hotpoint chassis.
WALL CASE DIMENSIONS
RAB80 WALL SLEEVE
Heavy-gauge galvanized steel, with insulation, for quick self-assembly. A –
42”, B – 13-3/4”, C – 16”
MAXIMUM CORD EXTENSION
WALL OPENING DIMENSIONS
- Add 1/4” to A and C dimensions for all cut-outs.
- RAB80 16-1/4” Min. H x 42-1/4” Min. W
AH12 ELECTRIC HEATER
230/208 VOLT| LINE CORD CONNECTED UNITS
Heater Watts| 3,500 / 2,897
Heater BTU| 10,900 / 8,900
Heater Amps| 15.3 / 13.7
Min Circuit| 20
Recommended protective Device| 20 amp time-delay fuse or breaker
AH12 HEAT PUMP
Heat Pump Watts| 485 / 465
Heat Pump BTU| 6,200/6,000
COP| 3.6
FEATURE AND BENEFITS
- 7,300 / 7,200 cooling BTU
- 12.9 / 13.0 EER
- 6,200 / 6,000 heating BTU
- 3.6 COP
- R32 Refrigerant – Environmental friendly, low GWP (Global Warming Potential)
- 3-Speed Fan – Give guests control over their comfort with three fan speeds to choose from
- 4-Temperature Limiting Options – Easily select one of four temperature ranges for peak efficiency and total customer comfort
- Intuitive Display – Allow guests to easily customize their preferred settings and reduce maintenance calls with an easy-to-use control panel
- Power Cord (LCDI) Included – Hotpoint PTACs come with everything needed for a quick and easy installation
- Automatic Emergency Heat – Keep guests comfortable with a heating option that uses electric resistance heat in heat pump mode
- Freeze and Frost Protection – Automatic freeze and indoor frost control keep units operating in peak condition
- Auto Power Recovery – In case of power failures, units automatically resume their operation when power restores, reducing maintenance calls
- Self Diagnostics – Quickly and easily identify service needs with a nine-point diagnostic code system
- Backed by an Industry Leader – With a long history of creating durable products at an affordable price, Hotpoint is your trusted PTAC brand
PRELIMINARY SPECIFICATIONS – SUBJECT TO CHANGE
Documents / Resources
|
Hotpoint AH12H07D3B PTAC Heat
Pump
[pdf] Instructions
AH12H07D3B, AH12H07D3B PTAC Heat Pump, PTAC Heat Pump, Heat Pump, Pump
---|---