samlexsolar SPB-EXPLORE200 200W Solar Panel and Power Inverter Bundle Installation Guide
- June 12, 2024
- samlexsolar
Table of Contents
Solar + Power Bundles
Models:
SPB-EXPLORE200
SPB-SHARE400
SPB-ENJOY600
Installation Guide
Thank you for purchasing the Samlex Solar Power Bundle. We know you will enjoy many years of great service from this quality state-of-the-art product. Samlex Customer Service and Application Engineers are available to assist you with installation, setup, or operating instructions.
The Solar Power Bundle is highly configurable for many different and specific applications. To get you up and running quickly, we have created this simple overview Reference Guide to assist you with the basic setup procedures so that you may later configure for your specific needs.
Install Instructions
Read all Manuals prior to Install
-
Check all materials in your kit
-
Plan your system
• Location for all products
– Cable and connections between all products
– Refer to wiring diagram -
Install Solar Panels
-
Install Charge Controller
-
Install Inverter
-
Install Fuse
-
Install Transfer Switch – Electrician required to conduct work
WARNING!
- If there are any items of the Reference Manual that you do not understand, do not attempt to install the unit yourself. For a safe and code compliant installation, consult a Certified Electrician that is familiar with Local and National electrical codes, proper installation of solar panels, and the design of alternative energy systems.
- All electrical systems both DC and AC must be disconnected from the source during the installation.
- Use of insolated tools is recommended.
SPB-EXPLORE-200 Installation
- NTX-RC Remote
- AC Input
- STS-30 Transfer Switch
- AC Distribution Panel (Not included)
- NTX-1500-12
- DC-2500-KIT
- ATM Inline Fuse
- SCC-30AB Solar Charge Controller
- 200W Solar Panel
- 20’ of #12 AWG Cable supplied with each Solar Panel Kit
- Battery
- MRBF
- 5W Battery Maintainer
| SPB-EXPLORE200 Includes: | Reference Manual |
|---|---|
| 1 | SRV-200-30A |
| Controller | SCC-30AB Manual |
| 1 | NTX-1500-12 |
Manual
1| STS-30| Transfer Switch with Inverter Quick Connect 30 Amps|
STS-30 Manual
1| DC-2500-KIT| 2500W Inverter Install Kit: (1) 300A fuse assembly
(includes fuse), (1) 10 Ft AWG# 2/0 Positive Cable, (1) 10 Ft AWG# 2/0
Negative Cable | DC-2500-KIT and NTX-1500-12 Manuals
1| SC-05| 5W SunCharger Battery Maintainer| SC-05 Manual
1| ATM-HOLDER| Inline Fuse Holder for #12 Awg Cable | SCC-30AB
Manual
1| ATM 30A FUSE| ATM Type 30A Fuse for #12 Awg Cable| SCC-30AB
Manual
SPB-SHARE-400 Installation
- 20’ of #12 AWG Cable supplied with each Solar Panel Kit
- SBC-2-DC
- EVO-RC-PLUS Remote
- AC Input
- EVO-2212
- DC-2500-KIT
- ATC Inline Fuse
- 200W Solar Panels
- EVO-30AB Solar Charge Controller
- Cable set with ATC-30A Fuse, 5’ #10 AWG
- Battery
- MRBF
- 10W Battery Maintainer
- AC Distribution Panel (Not included)
| SPB-SHARE400 Includes: | Reference Manual |
|---|---|
| 2 | SSP-200-KIT |
| and mounting brackets | EVO-30AB Manual |
| 1 | EVO-30AB |
Manual
1| EVO-2212| Inverter/Charger Input: 12VDC Output: 120VAC 2200 Watt
c/w 100 Amp Charger| EVO Quickstart Guide and Manual
1| EVO-RC-PLUS| Remote control for EVO Inverter Charger 1212F,
1212F-HW, 1224F, 1224F-HW| EVO-RC-PLUS Manual
1| SBC-2-DC| Solar Panel Branch Connectors: (1) Female Connector,
(1) Male Connector | EVO-30AB Manual
1| DC-2500-KIT| 2500W Inverter Install Kit: (1) 300A fuse assembly
(includes fuse), (1) 10 Ft AWG# 2/0 Positive Cable, (1) 10 Ft AWG# 2/0
Negative Cable| DC-2500-KIT and EVO-2212 Manuals
1| SC-10| 10 W Sun Charger Battery Maintainer| SC-10 Manual
1| Cable Set, 5’ #10 Awg| Cable Set, Red & Black 5ft, #10 Awg with
ATC 30A Fuse| EVO-30AB Manual
SPB-ENJOY-600 Installation
- 20’ of #12 AWG Cable supplied with each Solar Panel Kit
- 2x SBC-2-DC
- EVO-RC-PLUS Remote
- AC Input
- EVO-3012
- AC Distribution Panel (Not included)
- DC-3500-KIT
- ATC Inline Fuse
- 200W Solar Panels
- EVO-30AB Solar Charge Controller
- Cable set with ATC-30A Fuse, 5’ #10 AWG
- 10W Battery Maintainer
- Battery
| SPB-ENJOY600 Includes: | Reference Manual |
|---|---|
| 3 | SSP-200-KIT |
| and mounting brackets | EVO-30AB Manual |
| 1 | EVO-30AB |
Manual
1| EVO-3012| Inverter/Charger Input: 12VDC Output: 120VAC 3000 Watt
c/w 130 Amp Charger| EVO Quickstart Guide and Manual
1| EVO-RC-PLUS| Remote control for EVO Inverter Charger 1212F,
1212F-HW, 1224F, 1224F-HW | EVO-RC-PLUS Manual
2| SBC-2-DC| Solar Panel Branch Connectors: (1) Female Connector,
(1) Male Connector | EVO-30AB Manual
1| DC-3500-KIT| 2500W Inverter Install Kit: (1) 300A fuse assembly
(includes fuse), (1) 10 Ft AWG# 2/0 Positive Cable, (1) 10 Ft AWG# 2/0
Negative Cable | DC-2500-KIT and EVO Manuals
1| SC-10| 10 W Sun Charger Battery Maintainer| SC-10 Manual
1| Cable Set, 5’ #10 Awg| Cable Set, Red & Black 5ft, #10 Awg with
ATC 30A Fuse| EVO-30AB Manual
- Contact your supplier if any of the items are missing. If any damage is observed, do not proceed with the installation.
- Check that the model and specifications are correct (e.g. 12 or 24 Volt battery system, AC voltage and output power meets the load requirements).
Read the entire Owner’s Manuals of each of the products included in the Solar Power Bundle.
- Familiarize yourself with its contents prior to installation or operation. This Guide will frequently refer to specific pages in the Owner’s Manual for detailed information.
- Plan mounting locations and wiring in accordance with codes and directions from each product’s manual.
Contact Information
Toll Free Numbers
Ph: 1 800 561 5885
Fax: 1 888 814 5210
Local Numbers
Ph: 604 525 3836
Fax: 604 525 5221
USA Shipping Warehouses
Kent, WA
Plymouth, MI
Canadian Shipping Warehouse
Richmond, BC
11013-SPB-Installation Guide-0823