ggm gastro SF Series Rapid Hydraulic Sausage Filler Instruction Manual
- June 12, 2024
- ggm gastro
Table of Contents
RAPID SAUSAGE FILLER
- PLEASE READ INSTRUCTION THROUGHTLY BEFORE USING THE EQUIPMENT
Introduction：
SF series rapid sausage filler is suitable for meat processing enterprise and catering to fill sausage and ham sausage，etc. The machine adopts the hydro- cylinder to push forward and uses the foot switch. The electric elements and the fluid-pressure elements which are high-quality products imported or made in China, have the steady performance.
Operating Instruction:
a.please according the data plate to choose the correct supply. The supply
must has safe ground wire.
b. If is the three-phase power supply, please care the motor’s rotating
direction. The machine cannot work normally if motor rotate counter; please to
exchange two of the three-phase at will.
c.Put the mixed meat filling into the bowl and tighten the pressure cover.
d.Put on the casing and adjust the changeover switch on“clockwise”
position，then it will begin filling sausage when you step on the foot switch.
e.Adjust the changeover switch on “counter clockwise”position；then step on the
foot switch，the piston will return to the bottom of the bowl.
Service and Maintenance：
a.Before or after use，please clean bowl，pressure cover，the body and the pipe.
b.Turn the pressure valve which is under the connecting part，then you can
adjust the return speed of piston.
c.Please do not dismount the hydraulic elements，If the hydraulic system has
the problem please call on an expert to maintain.
Technical specifications
Model| Volume| Ratedfrequency| Voltage| Power|
Productivity| Net weight| Dimension
---|---|---|---|---|---|---|---
WFMHB15| 15 L| 50 Hz/60Hz| 110V ~
220V ~
230V ~
380V 3~| 0.75 kW| 300 kg/h| 120 kg| 600x400x1240
WFMHB26| 26 L| 50 Hz/60Hz| 1.1 kW| 400 kg/h| 140 kg| 640x485x1240
WFMHB35| 35 L| 50 Hz/60Hz| 1.5 kW| 600 kg/h| 160kg| 735x560x1240
Circuit Diagram
Hydraulic Pressure Diagram
Hydraulic stuffer exploded view
Illus| Part No.| Name of part| Illus| Part No|
Name of part
---|---|---|---|---|---
1| SF- 1| Motor| 29| SF-29| Magnetic valve
2| SF- 2| Flange| 30| SF-30| Overflow valve
3| SF- 3| Motor Connector| 31| SF-31| Circuit block
4| SF-4| Oil seal| 32| SF-32| Support frame
5| SF-5| Oil box cap| 33| SF-33| Side plate
6| SF-6| Oil box plate| 34| SF-34| Support frame
7| SF-7| Oil pump connector| 35| SF-35| Fuse
8| SF-8| Oil pump| 36| SF-36| Transformer
9| SF-9| Filter| 37| SF-37| Foot pedal
10| SF-10| Oil box| 38| SF- 38| Stuffing nozzle
11| SF-11| Screws| 39| SF-39| Gasket for nozzle
12| SF-12| External Gasket for oil tank piston| 40| SF-40| Trefoil nut
13| SF-13| Oil tank piston| 41| SF-41| cylinder Locking Screw
14| SF-14| Internal Gasket for oil tank piston| 42| SF-42| Gasket for
cylinder
15| SF-15| Piston Rod| 43| SF-43| Cylinder
16| SF-16| External gasket for Guide sleeve| 44| SF-44| Bar
17| SF-17| Guide sleeve| 45| SF-45| Bar
18| SF-18| Internal gasket for Guide sleeve| 46| SF-46| Plate
19| SF-19| Dust cover| 47| SF-47| Support plate
20| SF-20| Internal gasket for dust cover| 48| SF-48| Relay
21| SF-21| Piston Support frame| 49| SF-49| Timer
22| SF-22| Plunger/piston| 50| SF-50| Switch
23| SF-23| Gasket for piston| 51| SF-51| Emergency switch
24| SF-24| Top cover| 52| SF-52| Overload protection
25| SF-25| Spring| 53| SF-53| Main body
26| SF-26| Oil tank| 54| SF-54| Throttle valve
27| SF-27| Oil tank connector| 55| SF-55| Castors
28| SF-28| Gasket for oil tank connector| 56| SF-56| Back cover
| | | 57| SF-57| Universal castors