CROSLEY CRQN2215AS Bottom Mount Counter-Depth Refrigerator User Manual

USER’S OPERATION MANUAL
CRQN2215AS
CRQN2215AW

Before operating this unit, please read this manual thoroughly, and retain for future reference.
For questions about features, operation/performance, parts or service, call: 1-800-356-5268

Brief Introduction

Thank you for your choosing Crosley. We are sure you will find your new refrigerator a pleasure to use. Before you use the appliance, we recommend that you carefully read through these instructions, which provide details about installing and using the product.

• Please ensure that everyone using this appliance is familiar with its operation and safety features. It is important that you install the appliance correctly and pay careful attention to the safety instructions.

• We recommend that you keep this user’s manual with the appliance for future reference.

• This appliance is intended to be used in households and similar applications such as:
  Kitchen areas in shops, offices and other working environments.
  Hotels, motels and other residential environments.
  Bed and breakfast environments.
  Catering and similar non-commericial applications.

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have supervision or been given instruction concerning use of the appliance.
  Children should be supervised to ensure that they do not play with the appliance.

• Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.

WARNING

• Connect to potable water supply only.
• Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
• Do not damage the refrigerant circuit.
• Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.
• When disposing of the appliance do so only at an authorized waste disposal center. Do not expose to flame.
• If the power cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

Important Safety Instructions

General safety and daily use
It is important to use your appliance safely. We recommend that you follow the guidelines below.
Store any food in accordance with the storage instructions from the manufacturer.

• Don’t try to repair the appliance yourself.
  It is dangerous to alter the specifications or modify this product in any way. Any damage to the power cord may cause a short circuit, fire or electric shock.

• Don’t place too much food directly against the air outlet on the rear wall of both the refrigerator and freezer compartment, as it may affect important air circulation.

• Don’t place hot items near the plastic components of this appliance.

• Frozen food must not be refrozen once it has been thawed out.

• Don’t store bottled or canned drinks (especially carbonated drinks) in the freezer compartment. Bottles and cans may explode.

• Use caution consuming popsicles or ice cubes straight from the freezer as this can cause freezer burn to the mouth and lips.

Safety for children and other persons

• Keep all packaging away from children to avoid risk of suffocation.
• Protect children from being scalded by  touching the compressor at the rear bottom of appliance
• Don’t place items on top of the appliance as this could cause injury should they fall off.
• Never allow children to play with the appliance by hanging or standing over or on the doors, racks, shelves and drawers etc.

Electrical Safety
To avoid the risks that are always present when using an electric appliance, we recommend that you pay attention to the instructions about electricity below.

• Unpack and check through the appliance. Should any damage be evident, don’t plug in the appliance and contact the dealer from which you purchased it immediately. Keep all packing materials in this case.
• We recommend that you wait for 4 hours before connecting the appliance to allow the refrigerant to flow back into the compressor.
• The appliance requires single phase alternating current of 110-115V/60Hz. If the voltage fluctuates exceeding the upper limit an A.C. automatic voltage regulator of more than 350W should be applied to the refrigerator for safe use.
• The power plug must be accessible when the appliance is installed.
• This appliance must be grounded.
• This appliance is fitted with a plug, in accordance with local standard. The plug should be suitable for use in all houses fitted with sockets in accordance with current specifications.
• If the fitted plug is not suitable for your socket outlets, it should be cut off and carefully disposed of. To avoid a possible shock hazard, do not insert the discarded plug into a socket. If in doubt contact a qualified, registered electrician.
• Do not use extension cords or multiple sockets which could cause overloading of wiring circuits and could cause a fire. Always plug your appliance into its own individual electrical socket with a voltage rating that matches the appliance’s rating plate.
• Make sure that the plug is not squashed or damaged. Otherwise, it may cause short circuit, electric shock or overheat and even cause a fire.
• Do not insert the power plug if the socket is loose, there is a risk of electric shock or fire.
• Switch off the appliance and disconnect it from the main power before you clean or move it.
• Never unplug the appliance by pulling on the electrical cord. Always grip the plug firmly and pull straight out from the socket to prevent damaging the power cord.
• Do not operate the appliance without the cover on the interior lighting.
• Any electrical component must be replaced or repaired by a qualified electrician or authorized service engineer. Only genuine replacement parts should be used.
• Do not use electrical appliances such as ice cream makers inside the food storage compartments of the appliance unless they are approved by the manufacturer.
• To avoid eye injury, do not look directly into the LED light located in the refrigerator compartment. If it is not functioning correctly, consult a qualified, registered electrician or replace it in accordance with the “Cleaning and Care” chapter.

Refrigerant

• The refrigerant isobutane (R600a) is contained within the refrigerant circuit of the appliance. During transportation and installation of the appliance, ensure that none of the components of the refrigerant circuit become damaged. The refrigerant (R600a) is flammable.

Caution: Risk of Fire

• Don’t store products which contain flammable propellants (e.g. spray cans) or explosive substances in the appliances.

Should the refrigerant circuit be damaged:

• Avoid open flames (candles, lamps etc. ) and other sources of ignition.
• Thoroughly ventilate the room in which the appliance is situated.

Installing Your New Appliance

Before using the appliance for the first time, you should be informed of the following tips.

WARNING
For proper installation, this refrigerator must be placed on a level surface of hard material that is the same height as the rest of the flooring. This surface should be strong enough to support a fully loaded refrigerator.
The rollers, which are not casters, should be only used for forward or backward movement. Moving the refrigerator sideways may damage your floor and the rollers.
Ventilation of appliance
In order to improve efficiency of the cooling system and save energy, it is necessary to maintain good ventilation around the appliance for the dissipation of heat. For this reason, sufficient clear space should be available around the refrigerator.

Suggestion:
It is advisable for there to be at least 2″(50mm) of clearance from the back of the fridge to the wall, at least 2″(50mm) of clearance from its top, at least 1/2″(12mm) from its side to the wall and a clear space in front to allow the doors to open 125°, as shown in the following diagram.

A 2” Above
B 2” Behind
C 1/2” Each Side
Note:

• This appliance performs well within the climate class from N to T shown in the table below. It may not work properly if left at a temperature above or below the indicated range for a long period.

• Stand your appliance in a dry place to avoid high moisture.
• Keep the appliance out of direct sunlight, rain or frost. Stand the appliance away from heat sources such as stoves, fires or heaters.

Adjusting Door Height and Door Gap
The height of a door can be adjusted using the provided Snap Rings.
Tools you will need:

|
---|---
Snap Ring (4pcs)| Wrench(Not provided)

To adjust the Height of Door

1. Check the height difference between the doors and then lift and hold the lowest door to be even with the other.
2. Insert a suitably sized Snap Ring between the Door and the Hinge as shown.

IMPORTANT !

1. Insert only one Snap Ring. If you insert two or more Snap Rings, they may slip out or cause a rubbing noise.
2. Do not raise the door too much. The door may contact and damage the top cover.
3. Save rermaining Snap Rings for possible future use.

WARNING!
Contains Small Parts, Keep the Snap Rings Away From Babies and Children.

Leveling of appliance

• For sufficient leveling and air circulating in the lower rear section of the appliance, the bottom feet may need to be adjusted. You can adjust them manually by hand or by using a suitable tool.
• To allow the doors to self-close, tilt the top backwards by 0.4″ – 0.6″.

Door Removal

• In case your home access door is too narrow for the refrigerator to pass through, remove the refrigerator doors and drawers. If you do not need to remove the appliance doors, proceed to ‘Installing Water Lines’ on page 8.
  If you need to remove the doors, continue below.

Tools you will need(Not provided) ：

|
---|---
Allen Wrench (5/32″,4mm)| Wrench (5/16″,8mm)
Philips Screwdriver

1. With the door closed, remove the 3 screws holding the top cover (A) with Philips (+) screw driver, and then remove the top cover with the entire-harness atached.

2. Remove the 3 screws (B) fixed on the hinges with a wrench (5/16”, 8mm) and 1 ground screw (C) attached to the hinge with Philips (+) screw driver. Remove the upper left and right door hinges(D).

Installing the water lines
An automatic ice maker is a very useful feature in your new refrigerator. Please follow the below instructions carefully for correct installation.
In order for the ice maker to operate properly, a water line is required.
-the maximum inlet water pressure is 700kPa;
-the minimum inlet water pressure is 207kPa.
WARNING!
The water connection must be made by a qualified plumber. Operation outside the water pressure range may cause malfunction, or severe and damaging water leaks.
Under normal conditions, a200cc (5.75 oz.) cup can be filled in about 10 seconds.
If the refrigerator is installed in an area with low water pressure (below 30psi), you can install a booster pump to compensate for the low pressure.

What you need to have before you begin

1. Power drill and 1/4’’ drill bit.

2. 1/2’’ or adjustable wrench.

3. Flatblade and Philips head screwdrivers.
   

4. You may need to purchase several items to complete this connection.
   You may find these items sold as a kit at a local hardware store.

Connecting to the water supply line

1. First, shut off the main water supply.

2. Using a power drill and a 1/4’’ drill bit drill into the cold-water line and connect the saddle-type shutoff valve.

3. Connect 1/4’’ extension tubing to shutoff valve outlet.
   

4. Flush the tubing. Turn the main water supply on and flush out the tubing until the water is clear. Then, shut the water off at the water valve after about a quart of water has flushed through the tubing.

5. Connect the extension tubing line with the line on the back of the fridge via the coupler. Fully insert the extension tubing into the coupler, and then insert the clip onto the coupler to lock in the tubing. Do the same with the other end. After both clips are inserted, check the line to make sure it is held firmly by the clips.
   
   Note:
   Ensure that the water line does not get pinched or bent when installing.
   This can result in improper water flow through the line and will affect the functionality of the fridge.

6. Turn the water on and check for leakage.

Connect Water Line to Refrigerator
IMPROTANT: If you turn the refrigerator on before the water is connected,turn off the ice maker.

1. You may need to purchase below items to complete this connection. And you may find these items sold as a kit at a local hardware store.
   

2. Unplug refrigerator or disconnect power.

3. Close shutoff value.

4. Thread a 1/4 ” compression nut and ferrule (sleeve) onto the free end and of 1/4″ water line.

5.  Insert the free and of the 1/4″ water line into the brass fitting attached to the water inlet on the back of the refrigerator.

6.  Slide the 1/4″ compression nut over the ferrule (sleeve) and screw the 1/4″ compression nut onto the brass ftting.
   

7. Comfirm 1/4″ water line is secure by gently pulling on it.

8. Turn on water supply and check for leaks. Correct any leaks

Note:
Use only the new tubing supplied with the refrigerator. Old tubing should not be used.
After connected to the water supply line, please open the water valve to flush the filter for 5 minutes before use.
The initial dark discoloration of water is normal.
WARNING!
The water line must be connected to the cold water pipe. If it is connected to the hot water pipe, it may cause the purifier to malfunction.
Avoid contamination of pipes during installation.
Connect to potable water supply only.

Description of the Appliance

A Refrigerator LED Light
B Refrigerator Door Bin
C Mullion
D Glass Shelf
E Crisper Cover
F Freezer LED Light
G Ice-Maker
H Freezer Tray
I Freezer Middle Drawer
J Freezer Door Bin| K Freezer Lower Drawer
M Middle Storage Drawer
N Fruit and vegetabers Crisper
O Convertible Compartment LED light
P Convertible Compartment Tray
Q Convertible Compartment Middle Drawer
R Convertible Compartmente Lower Drawer
S Leveling Leg
---|---

Note !

• Due to unceasing modification of our products, your refrigerator may be slightly different from this instruction manual, but its functions and using methods remain the same.
• To get the best energy efficiency of this product,please place all shelves, drawers and baskets on their original position as per the illustration above.

Display Controls

Your product has one control panel which is installed on the top of refrigerator inside. Use your appliance according to the following control guidelines.

Setting Compartment Temperatures
When you set a temperature, you are setting an average temperature for the entire compartment. The actual compartment temperatures may vary from the temperatures displayed depending on the amount and placement of stored food, and the surrounding room temperature.
Recommended Temperature Settings

• Fridge Compartment: 39°F (4°C)
• My Fresh Choice Compartment: 19°F (-7°C)
• Freezer Compartment: 0°F (-18°C)

To toggle between Celsius and Fahrenheit on the display, press and hold the “TEMP.” button for three seconds.
Fridge Compartment Temperature

1. Press “ZONE” button repeatedly until the Fridge icon appears.

2. When Fridge is on, icon is illuminated and then press “TEMP.” button repeatedly to cycle through the available temperature settings from 46°F to 36°F.
   NOTE: Each press of the button decrease the setting by one degree.

3. Release the “TEMP.” button control when the desired temperature setting appears.

My Fresh Choice Compartment Temperature

1.  Press “ZONE” button repeatedly until the My Fresh Choice icon appears.

2.  When My Fresh Choice is on, icon is illuminated and then press “TEMP.” button repeatedly to cycle through the avaiable temperature settings from 41°F (5°C) to -4°F( -20°C).
   NOTE: Each press of the button decrease the setting by one degree.

3. Release the“TEMP.”button control when the desired temperature setting appears.

Freezer Compartment Temperature

1. Press “ZONE” button repeatedly until the Freezer icon appears.

2.  When Freezer is on, icon is illuminated and then press “TEMP.” button repeatedly to cycle through the available temperature settings, from 7°F(-14°C) to -11°F( -24°C) .
   NOTE: Each press of the button decrease the setting by one degree.

3.  Release the “TEMP.” button control when the desired temperature setting appears.

Super Cool

The Super Cool feature helps to keep food stored in the refrigerator at the set temperature during periods of high usage, large grocery loads, or temporarily warm room temperatures
The Super Cool feature lowers the temperature in the fridge compartment.

1. Press the “MODE” button to activate this function. The “Super Cool” icon will be illuminated and the fridge temperature indicator will display 36°F (2°C).
2.  Super cool will automatically turn off after 3 hours.
3.  When super cool function is on you can turn it off by pressing the “MODE” button or setting fridge temperature. To manually turn off the Super Cool function, the fridge temperature setting will revert back to the previous setting.

Super Freeze

Super Freeze will quickly lower the temperature within the freezer so food will freeze faster than usual. This feature also helps to keep vitamins and nutrition of fresh food and keep for longer period.

1.  Press the “MODE” button to activate this function. The “Super Freeze” icon will be illuminated and the temperature for the freezer is set to -11°F(-24°C).
2.  Super freezer will automatically turn off after 52 hours.
3. When Super Freeze function is on you can turn it off by pressing the “MODE” button or setting freezer temperature. To manually turn off the Super freezer function,the freezer temperature setting will revert back to the previous setting.
   NOTE: When you selecting the Super Freeze function, ensure there are no bottled or canned drinks(especially carbonated drinks) in the freezer compartment. Bottles and cans may explode.

ICE

The ice maker is located inside the freezer compartment, near the top of the compartment. When the ice maker makes ice, the ice is stored in freezer tray.

• Press the “ICE” button to turn the ice maker on or off. When the ice maker is turned on, the   icon lights.
• To use ice, open the freezer compartment door, then pull open the freezer tray and remove the ice iby ice scoop from it.

Tool you will need(provided in package)

Ice scoop|

Energy saving

Press the “Mode” button to turn on the energy saving function, the “Energy saving” icon will be illuminated.
When the energy saving function is on, the temperature of fridge is automatically switched to 43°F(6°C)and the temperature of freezer is automatically switched to 1°F(-17°C), the temperature of My Fresh Choices is compartment is immovability.
When energy saving function is on, you can switch it off by pressing the “MODE” button or adjusting the fridge/freezer temperature, the refrigerator temperature setting will revert back to the previous setting.
POWER

Press and hold the “POWER” button for 3 seconds to turn the power function on or off. When the power function is on, the icon lights and the display panel will show “OF”.
NOTE: When the power function is on, the refrigerator is stopped cooling.
Door Open Alarm
lf a door is open for longer than 2 minutes, an alarm will sound to alert you and the control panel will display “dr”. The alarm will sound 3 times every minute for 8 minutes.
To turn off the alarm, close all doors completely.
Demo mode
Demo mode is for store display, and it prevents the refrigerator from generating cool air. In this of Cooling off Mode, the refrigerator may seem like it is working but it will not make cool air. The display panel will show special segments as follow.

To switch off demo mode, press and hold “POWER” and “ICE” buttons at the same time for three seconds and the buzzer gave a long sound.

Using your Appliance

Using your fridge compartment
The refrigerator compartment is suitable for storage of vegetables and fruit. Food inside should be sealed for storage in order to avoid losing moisture or flavor permeating into other foods.
Caution!
Never close the refrigerator door while the shelves, crisper and/or telescopic slides are extended. It may damage both them and the refrigerator.
Opening and Closing Doors
The four doors can be opened and closed either separately or together.

• There is a mullion on the left-hand side refrigerator compartment door.
• When closing the left-hand door , the mullion folds behind the right-hand door joining the two doors.
• The temperature of the door frame is controlled to help prevent moisture from developing on the mullion. The temperature of the surface may be warm, which is normal, and will not affect the performance of the refrigerator.

NOTE: Befor e closing the left-hand door, make sure the mullion is folded inward. If the mullion is pulled outward it may become damaged when you try to close the door.

Using the Controls·
NOTE: The controls on your model may look different from this and other images in this manual, depending on your model’s features.
Door Bins
The refrigerator compartment is provided with six door bins, which are suitable for the storage of canned liquid, bottled drinks and packaged food. To remove the door, simply lift the racks up and pull straight out. To relocate the door , slide it in above the desired location and push down until it stops.
WARNING!
Do not place too many heavy things in the baskets. Before you liftup the door shelf vertically, please take the dood out.

Adjustable Shelves
The height of the shelves can be adjusted to fit your storage needs.

1. To remove a shelf, gently lift upward and then pull the shelf forward until the end of the shelf is past the rail support.

2.  To reinstall a shelf, gently slide the shelf back into the refrigerator compartment, and the lower the shelf onto the rail support.

Automatic Ice maker

• When the ice maker dumps ice into the ice box, any sounds you hear are part of normal operation.
• lf you do not dispense ice for a long periods of time, ice may clump in the ice box. lf this occurs, please remove all the ice and empty the box.
• lf you are going on a long vacation or business trip and won’t be using ice maker part for period of time, please close the water supply to prevent leaks.
• Throw out the first several batches of ice that is made as it will have contaminants.
• Do not store liquids in the ice box, as it may expand and break.

WARNING!
Do not allow your children to touch the ice maker. This could cause injury.

Cleaning and Care

For hygienic reasons the appliance (including exterior and interior accessories) should be cleaned at least once every two months.
WARNING!
To avoid electrical shock, the appliance must not be connected to the main power supply during cleaning. Before cleaning, switch the appliance off and remove the plug from the main socket.
Exterior cleaning
To maintain good appearance of your appliance, you should clean it regularly.

• Spray water onto a cleaning cloth instead of spraying directly onto the surface of the appliance. This helps ensure an even distribution of moisture to the surface.
• Clean the doors, handles and cabinet surfaces with a mild detergent and then wipe dry with a soft cloth.

CAUTION!

1. Don’t use sharp objects to clean with, as they are likely to scratch the surface.
2. Don’t use thinner, car cleaner, bleach, oil, abrasive cleansers or organic solvent such as benzene for cleaning. They may damage the surface of the appliance and may cause fire.

Interior cleaning
Clean the appliance interior regularly.
It will be easier to clean when food stocks are low. Wipe the inside of the fridge and freezer with a weak solution of baking soda and water, and then rinse with warm water using a wrung-out sponge or cloth. Wipe completely dry before replacing the shelves and baskets. Thoroughly dry all surfaces and removable parts before putting them back into place.

Although this appliance automatically defrosts, a layer of frost may occur on the freezer compartment’s interior walls if the freezer door is opened frequently or kept open too long. If the frost is too thick, choose a time when the freezer is nearly empty and proceed as follows:

1. Remove existing food and accessory baskets, unplug the appliance from the main power and leave the doors open. Ventilate the room thoroughly to accelerate the process.
2. When defrosting is completed, clean your freezer as described above.

WARNING!
Do not use sharp objects to remove frost from the freezer compartment.
Only after the interior is completely dry should the appliance be switched back on and plugged back into the main socket.

Door seal cleaning
Take care to keep the door seals clean. Sticky food and drinks can cause seals to stick to the cabinet and tear when you open the door. Wash seal with a mild detergent and warm water. Rinse and dry it thoroughly after cleaning.

CAUTION!
Only after the door seals are completely dry should the appliance be powered on.
Replacing the LED light

WARNING!
The LED light must be replaced by a competent person. If the LED light is damaged, follow the steps below:

1. Unplug your appliance.
2. Remove the light cover by lifting up and pulling out.
3. Hold the LED light with one hand and pull it while pressing the connector latch with the other hand.
4.  Replace the LED light and snap it correctly in place and replace the light cover.

Helpful Hints and Tips.

Energy Saving Tips
We recommend that you follow the tips below to save energy.

• Avoid keeping the door open for long periods in order to conserve energy.
  Ensure the appliance is away from any sources of heat (direct sunlight, electric oven or cooker etc.)

• Don’t set the temperature colder than necessary.

• Don’t store warm food or evaporating liquid in the appliance.

• Place the appliance in a well ventilated, humidity freeroom. Please refer to the Installing your New Appliance chapter.

• If the diagram shows the correct combination for the drawers, crisper and shelves, do not adjust the combination as this is designed to be the most energy efficient configuration.

Hints for fresh food refrigeration

• Do not place hot food directly into the refrigerator or freezer, the internal temperature will increase resulting in the compressor having to work harder and consume more energy.
• Do cover or wrap the food, particularly if it has a strong flavor.
• Place food properly so that air can circulate freely around it.

Hints for refrigeration

• For Meat: (all types) wrap in cling wrap and place on the glass shelf above the vegetable drawer. Always follow food storage times and use by dates suggested by manufacturers.

• Cooked food, cold dishes, etc.:
  They should be covered and placed on any shelf.

• Fruit and vegetables:
  They should be stored in the special drawer provided.

• Butter and cheese:
  Should be wrapped in airtight foil or plastic film wrap.

• Milk bottles:
  Should have a lid and be stored in the door racks.

Hints for freezing

• When first starting-up or after a period out of use, let the appliance run at least 2 hours on the higher settings before putting food in the compartment.
• Prepare food in small portions to enable it to be rapidly and completely frozen and to make it possible to subsequently thaw only the quantity required.
• Wrap up the food in aluminum foil or cling wraps which are airtight.
• Do not allow unfrozen food to touch the food which is already frozen to avoid temperature rise of the latter.
• Iced products (ice cubes, popsicles): if consumed immediately after removal from the freezer compartment, may cause frost burns to the skin.
• It is recommended to label and date each frozen package in order to keep track of the storage time.

Hints for the storage of frozen food

• Ensure that frozen food has been stored properly by the food retailer.
• Once defrosted, food will deteriorate rapidly and should not be re-frozen. Do not exceed the storage period indicated by the food manufacturer.

Switching off your appliance

If the appliance needs to be switched off for an extended period, the following steps should be taken to prevent mold on the appliance.

1. Remove all food.
2. Remove the power plug from the main socket.
3. Clean and dry the interior thoroughly.
4. Ensure that all the doors are wedged open slightly to allow air to circulate.

Troubleshooting

If you experience a problem with your appliance or are concerned that the appliance is not functioning correctly, you can carry out some easy checks before calling for service, please see below.

WARNING

1. Don’t try to repair the appliance yourself. If the problem persists after you have made the checks mentioned below, contact a qualified electrician, authorized service technician or the shop where you purchased the product.
2. A child entrapment warning statement is included below.

DANGER
Risk of child entrapment. Before you throw away your old refrigerator or freezer:
– Take off the doors.
– Leave the shelves in place so that children may not easily climb inside.

plugged into the power outlet properly.
Check the fuse or circuit of your power supply, replace if necessary.
The room temperature may be too low. Try setting the refrigerator or freezer temperature to a colder level to solve this problem.
It is normal that the freezer is not operating during the defrost cycle, or for a short time after the appliance is switched on to protect the compressor.
Odors from the compartments| The interior may need to be cleaned
Some food, containers or wrapping may cause odors.

**** Noise from the appliance

| The sounds below are quite normal:

•Compressor running noises.
•Air movement noise from the small fan motor in the freezer compartment or other compartments.
•Gurgling sound similar to water boiling.
•Popping noise during automatic defrosting.
•Clicking noise before the compressor starts.
•Clicking noise when dispensing water.
•The motor running noises when dispensing ice.

Other unusual noises may be due to the reasons below and may need you to check and take action:
The cabinet is not level.
The back of appliance is touching the wall. Bottles or containers have fallen or are rolling.
**** The motor runs continuously| It is normal to frequently hear the sound of the motor. It will need to run more in the following circumstances:
The temperature is set colder than necessary.
A large quantity of warm food has recently been stored within the appliance.
The temperature outside the appliance is high. Doors are kept open too long or too often.
After first installing the appliance or if it has been switched off for a long time.
---|---
A layer of frost occurs in the compartment| Check that the air outlets are not blocked by food and ensure food is placed within the appliance to allow sufficient ventilation. Ensure that the door is closing fully. o remove the frost, please refer to the Cleaning and Care chapter.
Temperature inside is too warm| You may have left the doors open too long or too frequently; or the doors are kept open by some obstacle; or the appliance is located with insufficient clearance at the sides, back and top.
Temperature inside is too cold| Increase the temperature by following the “Display Controls” chapter.
Doors can’t be closed easily| Check whether the top of the refrigerator is tilted back by 0.4″-0.6″(10-15mm) to allow the doors to self-close, or if something inside is preventing the doors from closing.

The light is not working

| The LED light may be damaged. Refer to replace LED lights in“ Cleaning and Care” chapter.

The control system has disabled the lights due to the door being kept open too long. Close and reopen the door to reactivate the lights.

Hear water bubbling in the refrigerator| ****

This is normal. The bubbling comes from the refrigerant coolant liquid circulating through the refrigerator.

**** Ice maker is not working| Did you wait for 24 hours after installation of the water supply line before making ice? If it is not sufficiently cool, it may take longer to make ice, such as when first installed.
Is the water line connected and the water valve open? Did you manually stop the ice making function?
Make sure you did not set the “Ice Off” mode.
Is there any ice stuck within the ice maker bucket?
Is the water pressure less than 30psi? Install a booster pump to compensate for the low pressure.
Is the freezer temperature too warm? Try setting the freezer temperature lower.
Ice maker is not making ice fast enough. Please wait for at least 90 minutes.

Disposal of the Appliance

DANGER
It is prohibited to dispose of this appliance as household waste.

Packaging materials
Packaging materials with the recycle symbol are recyclable.
Dispose of the packaging into a suitable waste collection container to recycle it.

Before disposal of the appliance

1. Pull out the main plug from the main socket.
2. Cut off the power cord and discard with the main plug.

WARNING
Refrigerators contain refrigerant and gases in the insulation. Refrigerant and gases must be disposed of professionally as they may cause eye injuries or ignition.
Ensure that tubing of the refrigerant circuit is not damaged prior to proper disposal.
Correct Disposal of this product

This symbol on the product or in its packing indicates that this product may not be treated as household waste. Instead, it should be taken to the appropriate waste collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by the inappropriate waste handling of this product. For more detailed information about the recycling of this product, please contact your local government, your household waste disposal service, or the shop where you purchased the product.
DISCLAiMER:
Images used throughout this document are or illustrative purposes only and may differ from the actual product.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>