NOKIA TA-1554 X Smartphone User Guide

NOKIA TA-1554 X Smartphone

Nokia X – Product Information

conditions
Camera| Used to capture photos and videos
SIM and memory card slot| Allows insertion of a nano-SIM card and a memory card for
additional storage
Front Camera| Used for front-facing photos and videos
Headset connector| Allows connection of a headset for audio output and microphone
input
Earpiece| Used for phone call audio output
Proximity sensor| Detects the presence of nearby objects to control screen
behavior during phone calls
Volume keys| Used to adjust the volume level
Power/Lock key| Used to power on/off the device and lock/unlock the screen
USB connector| Used for charging the device and connecting to a computer

Product Usage Instructions

1. Inserting the SIM and memory card:
   • Open the SIM card tray by pushing the tray opener pin into the tray hole and sliding the tray out.
   • Place the nano-SIM in the SIM slot on the tray with the contact area facing down.
   • If you have a memory card, insert it into the memory card slot.
   • Slide the tray back into the device.

Note: Only use original nano-SIM cards. Using incompatible SIM cards may damage the card or the device and corrupt data stored on the card. Use only compatible memory cards approved for use with this device. Incompatible cards may damage both the card and the device, and corrupt data stored on the card. Avoid removing the memory card while an app is using it to prevent damage to both the memory card and the device.

1. Charging the battery and switching on the phone:

   • Plug a compatible charger into a wall outlet.
   • Connect the charging cable to your phone’s USB-C port.
   • If charging from a computer, connect the phone with a USB cable, but note that it may take longer.
   • If the battery is completely discharged, it may take a few minutes before the charging indicator is displayed.
   • Press and hold the power key until the phone vibrates to switch it on.
   • Follow the on-screen instructions to complete the initial setup process.

2. Additional information:

   • For an online user guide with safety, legal information, and troubleshooting help, visit www.nokia.com/mobilesupport.

   • Refer to the Product and Safety Info booklet for important information on device usage and battery safety before using your device.

   • Your device can only be used on specific network frequencies: GSM 850, 1900; WCDMA 2, 4, 5; LTE 2, 4, 5, 12, 13, 41, 66, 71. You will need a subscription with a service provider. Contact your network service provider for more information.

   • The device has an internal, non-removable, rechargeable battery. Do not attempt to remove the battery or back cover as it may damage the device. To replace the battery, visit the nearest authorized service facility.

   • Charge the device using the AD-005U charger. HMD Global may offer additional battery or charger models for this device. Charging time may vary depending on device capability. Some accessories mentioned in this user guide, such as the charger, headset, or data cable, may be sold separately.

   • The surface of the device is nickel-free. Certain parts of the device are magnetic, which may attract metallic materials. Avoid placing credit cards or other magnetic stripe cards near the device
     for extended periods as it may cause damage to the cards.

   • Keep a safe distance when using the flash. Do not use the flash on people or animals at close range. Do not cover the flash while taking a photo.

3. Emergency calls:

Note: Connections for emergency calls cannot be guaranteed in all conditions.

1. Microphone
2. Loudspeaker
3. Flash
4. Camera
5. SIM and memory card slot
6. Front Camera
7. Microphone
8. Headset connector
9. Earpiece
10. Proximity sensor
11. Volume keys
12. Power/Lock key
13. USB connector

Insert the SIM and memory card

1. Open the SIM card tray: push the tray opener pin into the tray hole and slide the tray out.
2. Put the nano-SIM in the SIM slot on the tray with the contact area facing down.
3. If you have a memory card, put it in the memory card slot.
4. Slide the tray back in.
5. Use only original nano-SIM cards. The use of incompatible SIM cards may damage the card or the device and may corrupt data stored on the card.
6. Use only compatible memory cards approved for use with this device. Incompatible cards may damage the card and the device and corrupt data stored on the card.
7. Important: Do not remove the memory card when an app is using it. Doing so may damage the memory card and the device and corrupt data stored on the card.

Charge the battery and switch the phone on Plug a compatible charger into a wall outlet, and connect the cable to your phone. Your phone supports the USB-C cable.

You can also charge your phone from a computer with a USB cable, but it may take a longer time. If the battery is completely discharged, it may take several minutes before the charging indicator is displayed. To switch your phone on, press and hold the power key until the phone vibrates. The phone guides you through the setup.

For an online user guide with safety and legal information, and troubleshooting help, go to www.nokia.com/mobilesupport.

Product and safety info

Important : For important info on the safe use of your device and battery, read the Product and safety info booklet before you take your device into use. You can only use your device on the GSM 850, 1900; WCDMA 2, 4, 5; LTE 2, 4, 5, 12, 13, 41, 66, and 71 networks. You need a subscription with a service provider.
Important : 4G/LTE might not be supported by your network service provider or by the service provider you are using when traveling. In these cases, you may not be able to make or receive calls, send or receive messages or use mobile data connections. To make sure your device works seamlessly when full 4G/LTE service is not available, it is recommended that you change the highest connection speed from 4G to 3G. To do this, on the home screen, tap Settings > Network & Internet> SIMs, and switch the Preferred network type to 3G.

For more info, contact your network service provider. Your device has an internal, non-removable, rechargeable battery. Do not attempt to remove the battery or back cover, as you may damage the device. To replace the battery, take the device to the nearest authorised service facility. Charge your device with the AD-005U charger. HMD Global may make additional battery or charger models are available for this device. Charging time can vary depending on device capability. Some of the accessories mentioned in this user guide, such as chargers, headsets, or data cables may be sold separately.

The surface of the device is nickel-free. Parts of the device are magnetic. Metallic materials may be attracted to the device. Do not place credit cards or other magnetic stripe cards near the device for extended periods of time, since the cards may be damaged.
Note: Pre-installed system software and apps use a significant part of memory space. Keep a safe distance when using the flash. Do not use the flash on people or animals at close range. Do not cover the flash while taking a photo.

Emergency calls
Important: Connections in all conditions cannot be guaranteed. Never rely solely on any wireless phone for essential communications like medical emergencies.

Before making the call
Switch the phone on.
If the phone screen and keys are locked, unlock them.
Move to a place with adequate signal strength.

1. On the home screen, tap.
2. Type in the official emergency number for your present location.
3. Emergency call numbers vary by location.
4.  Tap.
5.  Give the necessary info as accurately as possible. Do not end the call until given permission to do so.

You may also need to do the following

• If your phone asks for a PIN code, tap Emergency Call.
• Switch the call restrictions off in your phone, such as call barring, fixed dialing, or closed user group.
• If the mobile network is not available, you may also try making an internet call, if you can access the internet.

Battery and charger safety
Once the charging of your device is complete, unplug the charger from the device and the electrical outlet. Please note that continuous charging should not exceed 12 hours. If left unused, a fully charged battery will lose its charge over time. Always keep the battery between 15°C and 25°C (59°F and 77°F) for optimal performance. Extreme temperatures reduce the capacity and lifetime of the battery. A device with a hot or cold battery may not work temporarily. Obey local regulations. Recycle when possible. Do not dispose of it as household waste. Do not expose the battery to extremely low air pressure or leave it to extremely high temperature, for example, dispose of it in a fire, as that may cause the battery to explode or leak flammable liquid or gas. Do not dismantle, cut, crush, bend, puncture, or otherwise damage the battery in any way. If the battery leaks, do not let liquid touch your skin or eyes.

If this happens, immediately flush the affected areas with water, or seek medical help. Do not modify, attempt to insert foreign objects into the battery, or immerse or expose it to water or other liquids. Batteries may explode if damaged. Use the battery and charger for their intended purposes only. Improper use or use of unapproved or incompatible batteries or chargers may present a risk of fire, explosion, or another hazard, and may invalidate any approval or warranty. If you believe the battery or charger is damaged, take it to a service center or your phone dealer before continuing to use it. Never use a damaged battery or charger. Only use the charger indoors. Do not charge your device during a lightning storm.

• To unplug a charger or an accessory, hold and pull the plug, not the cord.
• Additionally, the following applies if your device has a removable battery:
• Always switch the device off and unplug the charger before removing the battery.
• Accidental short-circuiting can happen when a metallic object touches the metal strips on the battery. This may damage the battery or the other object.

Take care of your device
Handle your device, battery, charger, and accessories with care. The following suggestions help you keep your device operational.

• Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that corrode electronic circuits. If your device gets wet, remove the battery if possible, and let the device dry.
• Do not use or store the device in dusty or dirty areas.
• Do not store the device in high temperatures. High temperatures may damage the device or battery.
• Do not store the device in cold temperatures. When the device warms to its normal temperature, moisture can form inside the device and damage it.
• Do not open the device other than as instructed in the user guide.
• Unauthorized modifications may damage the device and violate regulations governing radio devices.
• Do not drop, knock, or shake the device or the battery. Rough handling can break it.
• Only use a soft, clean, dry cloth to clean the surface of the device.
• Do not paint the device. Paint can prevent proper operation.
• Keep the device away from magnets or magnetic fields.
• To keep your important data safe, store it in at least two separate places, such as your device, memory card, or computer, or write down important info.

During extended operation, the device may feel warm. In most cases, this is normal. To avoid getting too warm, the device may automatically slow down, close apps, switch off charging, and if necessary, switch itself off. If the device is not working properly, take it to the nearest authorized service facility.

Protect your hearing
To prevent possible hearing damage, do not listen at high volume levels for long periods. Exercise caution when holding your device near your ear while the loudspeaker is in use.

Safety and texting while driving
Safety should be every driver’s first priority. Drivers must obey all local laws that may include restrictions on the use of mobile phones or accessories while driving. If use is legal, always keep your hands free to operate the vehicle while driving and use a hands-free device whenever possible. Suspend calls in heavy traffic or hazardous weather. Get to know your mobile phone and its features and make any necessary information inputs prior to driving. Do not input data or engage in text messaging while driving. Mobile phones should not be used when use may be a distraction to the driver. Copyrights and other notices

HAC notice
Your phone is compliant with the FCC Hearing Aid Compatibility requirements. The FCC has adopted HAC rules for digital wireless phones. These rules require certain phones to be tested and rated under the
American National Standard Institute (ANSI) C63.19-2011 hearing aid compatibility standards. The ANSI standard for hearing aid compatibility contains two types of ratings:

• M-Ratings: Rating for less radio frequency interference to enable acoustic coupling with hearing aids.
• T-Ratings: Rating for inductive coupling with hearing aids in telecoil mode.

Not all phones have been rated. A phone is considered hearing aid compatible under FCC rules if it is rated M3 or M4 for acoustic coupling and T3 or T4 for inductive coupling. These ratings are given on a scale from one to four, where four is the most compatible. Your phone meets the Mxx/Txx level rating. However, hearing aid compatibility ratings don’t guarantee that interference with your hearing aids won’t happen. Results will vary, depending on the level of immunity of your hearing device and the degree of your hearing loss. If your hearing device happens to be vulnerable to interference, you may not be able to use a rated phone successfully. Trying out the phone with your hearing device is the best way to evaluate it for your personal needs. This phone has been tested and rated for use with hearing aids for some of the wireless technologies that it uses. However, there may be some newer wireless technologies used in this phone that have not been tested yet for use with hearing aids. It is important to try the different features of this phone thoroughly and in different locations, using your hearing aid or cochlear implant, to determine if you hear any interfering noise.

Consult your service provider or the manufacturer of this phone for information on hearing aid compatibility. If you have questions about return or exchange policies, consult your service provider or phone retailer. Hearing devices may also be rated. Your hearing device manufacturer or hearing health professional may help you find this rating. For more information about FCC Hearing Aid Compatibility,
please go to http://www.fcc.gov/cgb/dro. This device has an electronic label for certification information. To access it, select Settings > System > Certification. HMD Global Oy provides a Manufacturer’s

Limited Warranty
(“Warranty”) for each genuine device (the “Product”) and related Accessories (as defined in Section 2 of the Warranty) designated for sale in the United States of America and Canada. The complete Warranty document is available at the following link and can be accessed by entering your device model number and selecting the applicable country and language: https://www.nokia.com/phones/  © 2023 HMD Global. HMD Global Oy is the exclusive licensee of the Nokia brand for phones & tablets. Nokia is a registered trademark of Nokia Corporation.

References

• Nokia Corporation

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>