Hotpoint AH12H07D2B PTAC Heat Pump Unit with Electric Heat Backup Installation Guide
- June 12, 2024
- Hotpoint
Table of Contents
PTAC Heat Pump Unit with Electric Heat Backup
AH12H07D2B Hotpoint® PTAC Heat Pump Unit with Electric Heat Backup 15
amps, 230/208 Volt
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
WALL CASE DIMENSIONS MAXIMUM CORD EXTENSION WALL OPENING
DIMENSIONS
Add 1/4” to A and C dimensions for all cut-outs.
RAB80 16-1/4” Min. H x 42-1/4” Min. W
ELECTRICAL WIRING
- All wiring, including installation of receptacle, must be made in accordance with local electrical codes and regulations.
NOTE: Aluminum wiring may pose special problems – consult a qualified electrician.
GRILLE OPTIONS
- Stamped Aluminum Grille – RAG70
ELECTRICAL CONNECTION
- 230/208 volt units must be plugged into a receptacle. Installation must comply with local electrical codes and regulations.
- Power cord is permanently attached on all Hotpoint chassis.
AH12 ELECTRIC | HEATER |
---|---|
230/208 VOLT | LINE CORD CONNECTED UNITS |
Heater Watts | 2580/2150 |
Heater BTU | 7800/6300 |
Heater Amps | 11.3/10.3 |
Min Circuit | 15 |
Recommended protective Device | 15 amp time-delay fuse or breaker |
AH12 HEAT | PUMP |
Heat Pump Watts | 485/465 |
Heat Pump BTU | 6200/6000 |
COP | 3.6 |
FEATURE AND BENEFITS
- 7,300 / 7,200 cooling BTU
- 12.9 / 13.0 EER
- 6,200 / 6,000 heating BTU
- 3.6 COP
- R32 Refrigerant – Environmental friendly, low GWP (Global Warming Potential)
- 3-Speed Fan – Give guests control over their comfort with three fan speeds to choose from
- 4-Temperature Limiting Options – Easily select one of four temperature ranges for peak efficiency and total customer comfort
- Intuitive Display – Allow guests to easily customize their preferred settings and reduce maintenance calls with an easy-to-use control panel
- Power Cord (LCDI) Included – Hotpoint PTACs come with everything needed for a quick and easy installation
- Automatic Emergency Heat – Keep guests comfortable with a heating option that uses electric resistance heat in heat pump mode
- Freeze and Frost Protection – Automatic freeze and indoor frost control keep units operating in peak condition
- Auto Power Recovery – In case of power failures, units automatically resume their operation when power restores, reducing maintenance calls
- Self Diagnostics – Quickly and easily identify service needs with a nine-point diagnostic code system
- Backed by an Industry Leader – With a long history of creating durable products at an affordable price, Hotpoint is your trusted PTAC brand
PRELIMINARY SPECIFICATIONS – SUBJECT TO CHANGE
31-5000804 Rev. 0
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>