EZVIZ CS-CMT-Solar Panel-C Solar Charging Panel User Guide
- June 12, 2024
- ezviz
Table of Contents
EZVIZ CS-CMT-Solar Panel-C Solar Charging Panel
Product Information
The product mentioned in the user manual is a solar panel designed and manufactured by Hangzhou EZVIZ Software Co., Ltd. It is intended to be used as an alternative charging equipment for a battery camera.
The solar panel comes with the following items in the box:
- Solar Panel (x1)
- Adjustable Mounting Bracket (x1)
- Screw Kit (x1)
- Quick Start Guide (x1)
- Drill Template (x1)
The solar panel is compatible with EZVIZ battery cameras and can help extend their battery life by harnessing solar energy.
Product Usage Instructions
Installation: You have the option to install the solar panel on either a wall or ceiling. Please note that the power generated by the solar panel may be affected by the surrounding environment, particularly the intensity of sunlight and the duration of illumination. It is important to understand that the solar panel alone may not guarantee continuous camera operation if there are insufficient charging conditions.
-
Install the bracket:
-
Place the drill template onto a clean and flat surface.
-
If you are installing on a cement wall or ceiling, drill screw
holes according to the template and insert anchors. -
Use three screws to fix the bracket in place.
-
-
Install the Solar Panel:
- Mount the solar panel onto the bracket.
- Tighten the fixing screw to secure the solar panel.
-
Charge the Battery Camera:
Connect the solar panel to the battery camera to initiate charging. Ensure a proper connection is established between the solar panel and the camera.
COPYRIGHT © Hangzhou EZVIZ Software Co., Ltd. ALL RIGHTS RESERVED.
Any and all information, including, among others, wordings, pictures, graphs
are the properties of Hangzhou EZVIZ Software Co., Ltd. (hereinafter referred
to as “EZVIZ”). This user manual (hereinafter referred to as “the Manual”)
cannot be reproduced, changed, translated, or distributed, partially or
wholly, by any means, without the prior written permission of EZVIZ. Unless
otherwise stipulated, EZVIZ does not make any warranties, guarantees or
representations, express or implied, regarding to the Manual. About this
Manual The Manual includes instructions for using and managing the product.
Pictures, charts, images and all other information hereinafter are for
description and explanation only. The information contained in the Manual is
subject to change, without notice, due to firmware updates or other reasons.
Please find the latest version in the ™ website (http://www.ezvizlife.com).
Revision Record
New release – January, 2022
Trademarks Acknowledgement
and other EZVIZ’s trademarks and logos are the properties of EZVIZ in various
jurisdictions. Other trademarks and logos mentioned below are the properties
of their respective owners.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH
ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND
ERRORS, AND EZVIZ MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT
LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR
PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL EZVIZ, ITS
DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL,
CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS,
DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA
OR DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF EZVIZ
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL EZVIZ’S
TOTAL LIABILITY FOR ALL DAMAGES EXCEED THE ORIGINAL PURCHASE PRICE OF THE
PRODUCT.
EZVIZ DOES NOT UNDERTAKE ANY LIABILITY FOR PERSONAL INJURY OR PROPERTY DAMAGE
AS THE RESULT OF PRODUCT INTERRUPTION OR SERVICE TERMINATION CAUSED BY: A)
IMPROPER INSTALLATION OR USAGE OTHER THAN AS REQUESTED; B) THE PROTECTION OF
NATIONAL OR PUBLIC INTERESTS; C) FORCE MAJEURE; D) YOURSELF OR THE THIRD
PARTY, INCLUDING WITHOUT LIMITATION, USING ANY THIRD PARTY’S PRODUCTS,
SOFTWARE, APPLICATIONS, AND AMONG OTHERS. REGARDING TO THE PRODUCT WITH
INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. EZVIZ
SHALL NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR
OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR
OTHER INTERNET SECURITY RISKS; HOWEVER, EZVIZ WILL PROVIDE TIMELY TECHNICAL
SUPPORT IF REQUIRED. SURVEILLANCE LAWS AND DATA PROTECTION LAWS VARY BY
JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING
THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS TO THE APPLICABLE LAW.
EZVIZ SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH
ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THE ABOVE AND THE APPLICABLE LAW, THE
LATTER PREVAILS.
Box Content
Installation
You can install the solar panel on the wall or ceiling.
CAUTION: As an alternative charging equipment, the power amount generated by this solar panel may be affected by its actual surrounding environment, mainly the intensity of sunlight and the time length of illumination. If the battery camera is running out of power soon, please bear it in mind that this solar panel alone cannot ensure the camera remains in working status.
Install the bracket
- Place drill template onto a clean and flat surface.
- (For the cement wall/ceiling only) Drill screw holes according to the template, and insert anchors.
- Use three screws to fix the bracket.
When drilling holes for expansion bolts, please make sure that the diameter of the drill head is 5.5mm to 6mm, and that the hole depth is not less than 25mm.
Install the Solar Panel
- Mount the solar panel on the bracket.
- Tighten the fixing screw.
Adjust the Angle
- Loosen the adjusting screw.
- Adjust the solar panel angle as your desired place.
- Tighten the adjusting screw when you have the solar panel in the position you want.
- Please do not place the solar panel completely parallel to the ground to avoid dust or other dirt.
- The solar panel should be tilted to receive maximum solar radiation and the recommended tilt angle is 25°-40°.
Charge the Battery Camera
- Connect it with battery camera.
- In accordance with safety and regulatory requirements, the working environment temperature range for battery charging should be maintained at 0-45°C.
- For detailed information, please visit www.ezvizlife.com.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>