Flexineb E3 Portable Equine Nebulizer Instructions
- June 12, 2024
- Flexineb
Table of Contents
Firmware Update Instructions
E3 Portable Equine Nebulizer
Step 1: Remove the battery door and battery as shown. If your unit has a
Red Switch, then move it to the RIGHT position for firmware update
function.
Step 2: Depending on the E3 version you have connect either a Mini-B USB
cable (digital camera type cable) or Micro USB cable (android phone type
cable) to the E3 controller end and connect the standard USB end to your
laptop or PC as shown.
Step 3: Go to www.flexineb.com website, click on
Support tab – Firmware Update Or click this link https://flexineb.com/pages
/firmware-update
Step 4: Click on Download (Windows).
Step 4: An executable file will
download to the bottom left corner of your PC.
Step 5: Click on the ʌ arrow and then Open. 
Step 6:
Step 7: The program will search for your E3 unit
before proceeding to the Update function Click on Update.
Step 8: Device updated successfully message appears.
Click OK and then Exit to complete the update.
Step 9: Unplug the USB cable.
Move the Red Switch back to the LEFT position for normal function on units
with this switch. Re-fit the battery and add the battery door. All done.
June
2023
References
- Home – Flexineb® - Official Site
- Home – Flexineb® - Official Site
- Firmware Update – Flexineb® - Official Site