Skullcandy S2GTW Grind In-Ear Wireless Earbuds User Guide
- June 12, 2024
- Skullcandy
Table of Contents
Skullcandy S2GTW Grind In-Ear Wireless Earbuds
Download the Skullcandy App
Auto Power – On/Off
- Auto On – *Open Lid
- Auto Off – *Close Lid
Power – On
Left Earbud or Right Earbud
Power – Off
Left Earbud or Right Earbud
Pairing Mode
Left Earbud or Right Earbud *On Mode
Pair New Device
“Grind Fuel”
Play/Pause Answer/End
Left Earbud or Right Earbud *While On
Volume Up
Right Earbud *While Audio is Playing
Volume Down
Left Earbud While Audio is Playing
Share Audio
Right Earbud – “Share”Left Earbud – “Join” *While On
Re-Sync Earbuds
Both Earbuds While On Bluetooth Disconnected
Find With Tile™
Both Earbuds *Tile App Required
One Touch to Spotify
Left Earbud Only While On Spotify App Required
Reset Paired Device List
Right Earbud Only While ON Bluetooth Disconnected
Charge Earbuds
*Close Lid To Charge
Charge the Case
Voice Control
*Skullcandy App Required
Questions Visit: www.skullcandy.com
- Speaker Driver: 6mm,
- Impedance: 22 Ohms,
- THD <3%@50KHz-10KHz,
- Voltage Regulation: 3.7v,
- Bluetooth® 5.2,
- Frequency Band: 2.402GHz – 2.480GHz,
- Maximum Power: <10dBm,
- Weight: 62.5g.
Skullcandy, ,and other marks are registered trademarks of Skullcandy, Inc. All rights reserved.
Maximum operating temperature 45ºC.
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
ISED Compliance Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1 )This device may not cause interference.(2)This device must accept any interference, including interference that may cause undesired operation of the device.
ISED SAR Compliance Statement
- This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
- The portable device is designed to meet the requirements for exposure to radio waves established by the ISED. These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the body.
Contains Li-ion battery. Battery must be recycled or dispocsed of properly.
Made in Vietnam.
- Hardware Version:
- revD1 (Earbuds) /
- revC1 (Charge Case)
- Software Version:
- v 4.6 (Earbuds) /
- v 1.0.0.15 (Charge Case)
Grind Fuel
- MODEL: S2GFW
- FCC ID: Y22-S2GFW
- IC: 10486A-S2GFW
- Americas Skullcandy, Inc. 6301 N Landmark Dr. Park City, UT 84098 U.S.A. Skullcandy.com
- Canada Skullcandy Canada ULC 329 Railway St. Unit 205 Vancouver, BC. V6A 1A4 Canada Skullcandy.ca
- Europe Skullcandy Europe BV Postbus 425 5500AK Veldhoven Nederlandv Skullcandy.eu
- Skullcandy UK LTD Andrews House College Road Guildford GU1 4QB Skullcandy.co.uk
- México Skullcandy Mexico S de RL de CV Aristoteles 218 Polanco IV Seccion, Miguel Hidalgo 11550, México City, México Skullcandy.mx
Warranty
1 Year Global Limited Warranty
United States of America and Canada Product Purchases Only
Skullcandy products are backed by a 1-year limited warranty. If it doesn’t work the way we promised, we’ll make it right. For Guarantee Claims, Questions and Terms & Conditions visit www.skullcandy.com/warranty or call us at 1-888-MYSKULL
Product Purchases Outside The United States of America and Canada
Internet-osoitteessa: skullcandy.eu/product-documents Skullcandy products are backed by a 1-year limited warranty. If it doesn’t work the way we promised, we’ll make it right. For Guarantee Claims, Questions, and Terms & Conditions visit www.skullcandy.com/warranty or email us at help-eu@skullcandy.com
DECLARATION OF CONFORMITY
Hereby, Skullcandy Internation GmbH declares that the radio equipment type [Model: S2GTW] is in compliance with Directive 2014/53/EU.The full text of the EU declaration of conformity is available at the following internet address: skullcandy.eu/product-documents
FEATURES
In general, though, I can give you an outline of the characteristics that are typically featured in Skullcandy wireless earbuds, which are as follows:
-
Connectivity via Wireless Transmission:
Skullcandy’s wireless earbuds often link to mobile devices such as smartphones, tablets, and laptops through the use of the Bluetooth wireless technology. -
In-Ear Configuration:
The majority of Skullcandy’s earbuds have an in-ear design that allows them to be inserted completely into the ear canal. This provides passive noise isolation as well as a secure fit. -
Battery Capacity:
Depending on the model, different Skullcandy earbuds offer a range of different levels of battery life. Playback time on a single charge might last anywhere from a few hours to more than a day, depending on how the device is used and various other factors. -
The Charges Against You:
A good number of wireless earbuds come with a charging case that not only protects the earphones when they are not in use but also allows for additional charge while the user is on the move. This adds more minutes to the overall listening experience. -
Toggle switches and pushbuttons:
Earbuds typically include built-in controls that let the user to adjust the volume, skip songs, pause and play music, and answer and end phone calls. Earbuds themselves on some models can be touched to access various functions. -
Resistance to both water and sweat:
Some Skullcandy earbuds are constructed to be resistant to water and perspiration, making them perfect for use during exercise and other activities that take place outside. -
It’s a microphone:
Earbuds with built-in microphones let you answer calls without having to remove them, and certain versions also feature voice assistants like Siri and Google Assistant. -
The Quality of the Sound:
Skullcandy earbuds are well-known for having a sound profile that is strong on the bass, which may be appealing to customers who like more pronounced low frequencies. -
Personalization and Assistance with Apps:
You may alter the equalization settings on certain Skullcandy models by using the companion app, which also enables you to trace missing earphones and do other useful tasks.
FREQUENTLY ASKED QUESTIONS
What are the Skullcandy S2GTW Grind In-Ear Wireless Earbuds?
The Skullcandy S2GTW Grind are in-ear wireless earbuds designed for listening to music and taking calls without the hassle of wires.
Are the Skullcandy S2GTW Grind earbuds truly wireless?
Yes, they are truly wireless, meaning there are no wires connecting the earbuds to your device.
What is the battery life of the Skullcandy S2GTW Grind earbuds?
The battery life is typically around 8 hours of playback on a full charge, with an additional 2-3 charges from the included charging case.
How do I charge the Skullcandy S2GTW Grind earbuds?
Place the earbuds inside the charging case and connect the case to a power source using the included USB cable.
Do the Skullcandy S2GTW Grind earbuds have noise-canceling features?
No, these earbuds do not have active noise-canceling features.
Are the Skullcandy S2GTW Grind earbuds sweat-resistant or waterproof?
They have a sweat-resistant design, but they are not fully waterproof. They should withstand light moisture but are not suitable for heavy exposure to water.
How do I pair the Skullcandy S2GTW Grind earbuds with my device?
Activate Bluetooth on your device, then open the charging case. The earbuds should enter pairing mode, and you can select them from your device's Bluetooth menu.
Can I use the Skullcandy S2GTW Grind earbuds for phone calls?
Yes, you can use them to make and receive phone calls.
Do the Skullcandy S2GTW Grind earbuds have physical controls?
Yes, they have physical buttons for controlling playback, answering calls, and adjusting volume.
Can I use just one earbud at a time?
Yes, you can use either the left or right earbud independently.
What type of sound quality do the Skullcandy S2GTW Grind earbuds offer?
They provide a balanced sound profile with a focus on bass, which is a common characteristic of Skullcandy headphones.
Are there different sizes of ear tips included?
Yes, the earbuds typically come with different sizes of ear tips to help you find the best fit.
Are the Skullcandy S2GTW Grind earbuds compatible with voice assistants like Siri or Google Assistant?
Yes, they should be compatible with voice assistants through your connected device.
Can I control track skipping with the earbuds?
Yes, you can control track skipping using the physical buttons on the earbuds.
What Bluetooth version do the Skullcandy S2GTW Grind earbuds use?
The Bluetooth version used is likely 4.1 or higher, but you should check the product specifications for the exact version.
VIDEO – PRODUCT OVERVIEW
Download the PDF Link:Skullcandy S2GTW Grind In-Ear Wireless Earbuds User Guide